Heating and Cooling South Lyon

Responded to service call for bathroom vanity lighting issue where bulbs were not illuminating properly. Evaluated three-lamp horizontal vanity fixture with frosted ribbed glass shades mounted above mirror. Replaced non-functioning bulbs and verified proper electrical operation of all three lamp sockets. Fixture now provides full illumination across all three positions as intended.

Completed estimate for replacement of existing furnace and air conditioning system. Current HVAC equipment is non-operational with AC unit confirmed low on refrigerant. Assessed outdoor condensing unit positioned at exterior foundation corner and indoor thermostat showing 77°F reading. Provided separate quotes for furnace and air conditioner replacement as requested to allow flexibility in equipment replacement options.

Inspected residential toilet system and documented existing conditions. Tank interior revealed significant mineral deposits, hard water staining, and a visible crack in the upper left portion of the ceramic tank wall. Fill valve assembly with float mechanism and flush valve with rubber flapper were operational but showing age-related wear consistent with the deteriorated tank condition. Photographed both exterior toilet installation and internal tank components for service documentation and recommended replacement due to structural compromise of the tank.

Completed installation of new gas dryer in residential laundry room of 25-year-old home. Connected gas supply line using approved flexible corrugated stainless steel connector with proper fittings and leak testing. Installed metallic flexible exhaust duct venting system routed through ceiling space to exterior termination point, ensuring proper airflow and code compliance. Verified all connections secure, tested gas line for leaks, and confirmed dryer operational with proper venting.

Completed comprehensive Gold AC inspection on an 11-year-old Goodman air conditioning system with basement-located air handler. Performed thorough multi-point evaluation of outdoor condenser unit, inspecting fan motor operation, electrical connections, refrigerant lines, and overall unit condition. Verified proper airflow through coil fins and checked for any signs of refrigerant leaks or component deterioration. Inspected basement air handler and coil assembly, examining drain line functionality, blower motor operation, and filter condition. Tested system operation and confirmed adequate cooling performance within acceptable parameters. Documented equipment condition with photographic evidence showing outdoor condenser unit positioned on gravel pad with proper clearances and basement mechanical room setup including dual water heaters and HVAC components. System operating as designed with no immediate service needs identified at time of inspection.

Completed comprehensive Gold AC inspection on 25-year-old residential air conditioning system with air handler located in basement and dual outdoor condenser units. Performed full system evaluation including visual inspection of both outdoor condensers, which showed accumulation of debris and organic material on surrounding ground area and unit surfaces. Inspected basement mechanical equipment and plumbing connections, noting mineral deposits and discoloration around water heater pan area indicating previous moisture issues. Documented system condition through photographic records showing outdoor unit placement in landscaped area with adequate clearance and indoor mechanical components. System operational at time of inspection with homeowner present to discuss findings and maintenance recommendations for aging equipment.

Replaced front foundation exterior hose spigot (hose bib) mounted on brick wall. Removed old fixture, installed new chrome-finished frost-free sillcock, and verified proper operation and sealing at wall penetration to prevent water intrusion.

Responded to outdoor spigot that would not shut off using the exterior handle and required shutoff from inside the home. Inspected exterior hose bib located on side of residence near HVAC unit and traced supply line to interior shutoff valve in basement utility area. Determined that exterior valve stem assembly had failed, preventing proper closure at the outdoor handle. Replaced faulty hose bib with new frost-free sillcock, ensuring proper valve seat engagement and handle operation. Tested new installation for proper shutoff function at exterior handle and verified no leaks at connection points or through valve body. Restored full operational control of outdoor water supply from exterior location, eliminating need for interior shutoff access.

Completed comprehensive Gold AC inspection on 12-year-old single-zone air conditioning system with basement-located air handler. System was operational at time of service. Performed full diagnostic evaluation using digital instrumentation to verify proper system performance. Measured supply air temperature at 45.3°F at register, confirming adequate cooling output. Conducted refrigerant system analysis using manifold gauges, recording system pressures of -61.4 PSIG on both high and low sides for R410A refrigerant. Documented temperature differentials with return dry bulb at 70.3°F, return wet bulb at 56.9°F, supply dry bulb at 44.4°F, and supply wet bulb at 41.4°F, indicating proper heat exchange and dehumidification. All measurements fall within acceptable operating parameters for residential cooling equipment. System demonstrated normal operation with no deficiencies identified during inspection.

Responded to residential plumbing service call addressing multiple fixtures in 20-year-old home. Inspected basement toilet with reported float/parts malfunction; removed tank lid and assessed fill valve assembly, flapper mechanism, and internal components showing mineral deposits and wear consistent with age. Photographed tank interior documenting condition of fill valve with red adjustment cap, flush valve assembly, and water supply connections. Identified staining and sediment buildup throughout tank indicating hard water exposure. Evaluated upstairs bathroom sink with intermittent dripping issue for minor repair requirements. Assessed outdoor hose faucet where hose connection was stuck and required specialized removal tool for service. Provided technical recommendations for necessary repairs and component replacements based on inspection findings.

Completed comprehensive Gold AC inspection on single residential air conditioning system with equipment under 10 years old and air handler located in basement. Performed thorough examination of outdoor condenser unit, which showed normal operational wear with dust and dirt accumulation on metal fins and housing. Verified unit functionality and proper operation of all components including condenser coils, fan assembly, and electrical connections. Inspected refrigerant lines, electrical disconnect box, and PVC conduit for proper installation and condition. Confirmed condenser unit remains level on concrete pad with adequate clearance, though noted some grass growth and minor debris accumulation around base of unit and pad perimeter. System operating within normal parameters at time of inspection.

Conducted on-site evaluation for new whole home generator installation. Assessed existing electrical panel configuration and capacity, documenting current breaker arrangement and available space for generator integration. Identified utility meter upgrade requirement as prerequisite for whole home generator system installation, pending utility company approval and service enhancement to accommodate additional load demand.

Responded to complaint of low water pressure in multiple areas and sediment in toilet affecting 13-year-old residential property equipped with water softener and reverse osmosis system. Inspected main water supply line at exterior location and evaluated pressure regulator assembly with convergent piping connections. Examined water treatment system consisting of brine tank and stainless steel softener tank with digital control head in utility area. Assessed copper supply lines, valve connections, and pressure regulation components for flow restrictions, sediment accumulation, and proper system operation. Documented existing conditions of filtration equipment and pressure control assembly through photographic evidence for service records.

Conducted diagnostic inspection of a leaking 50-gallon hot water tank in basement that was previously replaced under warranty in December 2022. Accessed internal components to evaluate failure point, documenting evidence of water leakage at base of unit. Identified this as second warranty claim on system originally installed in 2017, with current warranty valid until June 2027. Photos documented exposed heating chamber and valve assembly for warranty claim documentation.

Responded to service call for backup sump pump malfunction following power outage. Upon inspection, identified improperly installed check valve as root cause of system failure. Corrected valve installation and verified proper operation of primary and backup pump systems to ensure reliable basement flood protection.

Conducted assessment of basement heating concerns following recent renovations. Inspected existing ductwork configuration and 7-year-old furnace system to determine proper installation and function. Provided estimate for installation of secondary heat source to address temperature differential issues in basement area.

Performed verification of I-Wave installation in customer's HVAC system and confirmed proper operation. Inspected electrical connections including wiring harness and control module, documenting installation with photos. System functioning as designed with no operational issues observed.

Successfully removed water backup system connected to the basement sump pump as requested. Inspected all associated plumbing components including PVC piping, connectors, and basin. No issues were identified with the existing sump pump setup in this 13-year-old home.