Heating and Cooling Hazel Park

Responded to service call for toilet wax ring replacement estimate at residential property. Upon arrival, conducted thorough inspection of toilet installation and surrounding floor area. Assessed toilet condition, checked for signs of water damage or leakage at base, and evaluated existing wax ring seal integrity. Documented current bathroom conditions with photographs showing standard two-piece white porcelain toilet installed on laminate flooring. Provided customer with detailed estimate for wax ring replacement service including removal and reinstallation of toilet fixture with new wax seal.

Responded to customer complaint of rattling noise coming through upstairs registers during system operation. Inspected 7-year-old furnace unit located in basement and associated ductwork. Examined all accessible duct connections, plenum attachments, and register boots for loose components or hardware. Verified system operational status with both heating and cooling modes functioning properly. Checked thermostat programming and confirmed proper system cycling. No loose components found within furnace cabinet or accessible ductwork that would account for reported noise. Advised customer that rattling may be originating from register grilles, duct hangers, or sections of ductwork not readily accessible from basement location and recommended monitoring for any changes in noise pattern or system performance.

Performed diagnostic inspection on 3-year-old residential air conditioning system located in basement. Inspected outdoor condenser unit positioned on concrete pad adjacent to home exterior, confirming proper airflow through vertical louvers and radial fan grille assembly. Verified electrical connections at junction box and conduit routing along exterior wall. Examined indoor air handler ventilation grille and confirmed proper louver operation. Unit found in operational condition with parts under manufacturer warranty coverage.

Responded to service call for 12-year-old air conditioning system not cooling properly. Upon inspection, found furnace in failed condition and outdoor condenser unit completely empty of R-22 refrigerant. Due to age of equipment, unavailability of R-22 refrigerant, and failed furnace component, provided comprehensive estimate for complete HVAC system replacement.

Responded to no cooling complaint on 7-year-old residential air conditioning system. Upon arrival, found outdoor condensing unit inoperative. Performed diagnostic testing and identified failed dual run capacitor preventing compressor and condenser fan motor operation. Verified capacitor failure using digital multimeter, reading zero microfarads on affected terminals. Replaced defective Aqualine FB291-405RU2 capacitor with new OEM-equivalent component rated at 370/440VAC. Restored power to unit and confirmed proper compressor startup, condenser fan operation, and normal system pressures. Tested system through complete cooling cycle with all components functioning within manufacturer specifications. System returned to full operational status with proper cooling restored.

Performed comprehensive tune-up and safety inspection on Goodman furnace unit located on second floor. Conducted thorough carbon monoxide testing as specifically requested by customer, with all readings within safe parameters. Inspected blower motor assembly, gas valve, refrigerant lines, electrical connections, and ductwork connections. Verified proper operation of all internal components including ignition system and heat exchanger. All systems functioning properly with no issues identified during inspection.

Completed comprehensive Gold AC inspection on residential single-zone air conditioning system less than one year old with air handler located in basement. Performed thorough visual assessment of outdoor condenser unit, documenting equipment condition through detailed photography. Inspection revealed significant accumulation of dirt, dust, and debris on exterior condenser coils and filter surfaces, as well as overgrown vegetation around unit base requiring attention for optimal airflow and system efficiency. Verified system operational status, examined fan assembly and mounting hardware, and assessed overall equipment condition. Unit currently functioning properly despite maintenance needs identified during inspection.

Completed full HVAC system installation including a 70,000 BTU furnace, 2-ton rear-discharge air conditioning unit, programmable thermostat, and humidifier in basement utility area. Installed all ductwork connections, reconnected existing electrical service, and integrated condensate pump with drainage system. Mechanical, electrical, and furnace permits secured for compliance; system registered under AHRI certificate 215584890 and qualified for utility energy efficiency rebates.

Completed comprehensive Gold AC Inspection on a 6-year-old air conditioning system with outdoor condensing unit and basement-located air handler. Performed full system evaluation including visual inspection of condensing unit exterior condition, verified operational status of all components, and documented equipment condition through photographic records. All equipment confirmed operational at time of inspection with homeowner present.

Completed electrical estimate for smart light switch installation at residential property. Evaluated existing wall-mounted switch location and electrical infrastructure to determine compatibility and requirements for installing a four-button touch-sensitive smart switch with backlit controls. Assessed wiring configuration, load requirements, and provided recommendations for proper installation of the programmable lighting control system.

Conducted comprehensive evaluation of 30-year-old basement-installed heating and cooling system in small residential property (0-1500 sq.ft.) for full system replacement estimate. Assessed existing natural gas furnace, air conditioning unit, ductwork, and ventilation components showing significant age-related deterioration. Documented current equipment specifications, measured existing duct runs including flexible and rigid metal ductwork with insulated vertical runs, and evaluated basement installation space constraints for replacement equipment sizing and positioning.

Completed installation of 2.5 ton Lennox air conditioning system with new evaporator coil in left side yard location. System was positioned on river rock base adjacent to brick wall exterior, with all refrigerant lines properly connected to existing Bryant furnace system in interior utility room. Obtained mechanical, electrical, and air conditioning permits, performed system flush, verified all connections, and successfully reconnected complete HVAC system to operational status.

Completed comprehensive HVAC tune-up and inspection on Goodman furnace unit located in laundry room utility area. Performed thorough system evaluation including inspection of ductwork, connections, and ventilation components; verified proper operation of thermostat controls; assessed humidifier functionality; and conducted safety inspection of associated hot water tank. All equipment photographed and documented, with ductwork showing normal wear patterns consistent with standard operational use and all components found to be functioning within acceptable parameters.

Completed electrical warranty work for residential HVAC installation. Verified proper electrical connections to outdoor condensing unit, confirmed disconnect switch functionality, and ensured all line set wiring meets code requirements. All electrical components tested and operating within manufacturer specifications.

Conducted on-site evaluation for replacement estimate of twenty-year-old air conditioning system located outside downstairs front of residence. Documented existing HVAC equipment including Bryant furnace with gas piping and White Rodgers programmable thermostat. Captured photographic documentation of current system components to assess compatibility requirements and provide accurate replacement specifications for new air conditioner installation.

Conducted on-site assessment for complete HVAC system replacement in small residential property (0-1500 sq.ft.) with basement installation requirements. Evaluated existing natural gas heating and cooling infrastructure, documented current electrical panel configuration with multiple circuit breakers and main disconnect, and assessed utility room layout including water heater proximity and available clearances for new equipment installation. Provided comprehensive replacement quote for dual heating and cooling system suitable for basement mounting with natural gas energy source.

Successfully completed full HVAC system installation including a 70,000 BTU furnace with 180-degree rotation configuration, 2-ton air conditioning unit with rear positioning, humidifier, and APCO air purification system. Installed condensate pump, ran 500 feet of refrigerant lines, and reconnected all electrical components to existing service panel. Requested and coordinated mechanical and electrical permits, programmed new Honeywell Home digital thermostat, and completed all required documentation for utility rebate processing.

Provided replacement estimate for 25-year-old central air conditioning system located on west side of residence. Inspected existing outdoor condenser unit and indoor components, documenting current equipment condition through photos of aged HVAC ductwork and interior mechanical spaces showing weathered metal surfaces with oxidation. No immediate operational issues reported; estimate prepared for complete system replacement due to equipment age.

Responded to no cooling complaint on 10+ year old commercial AC unit. Found condenser coil frozen with restricted refrigerant circulation. Diagnosed low refrigerant charge causing evaporator coil to freeze, restricting airflow and preventing proper heat exchange. Thawed coil, identified leak in system, and documented equipment condition with photos for further repair recommendations.

Performed comprehensive inspection and cleaning of 10+ year old cooling system located in basement. Evaluated HVAC unit condition, including ductwork connections and airflow components, and completed full system cleaning as requested. Documented exterior electrical service installation and interior equipment configuration with photographic records for reference.