Heating and Cooling Clinton Township

Conducted on-site assessment for complete HVAC system replacement at owner-occupied residence. Evaluated existing basement-mounted forced air furnace and outdoor condensing unit, both showing significant age-related deterioration including rust, discoloration, and accumulated wear. Documented current system configuration including ductwork layout, electrical connections, and equipment placement between structures. Prepared comprehensive replacement estimate for full heating and cooling system installation.

Completed comprehensive Gold AC Inspection on a one-year-old Lennox outdoor condensing unit located on residential property. Performed full system evaluation including visual inspection of condenser cabinet, louvered panels, fan assembly, and refrigerant lines, confirming unit is in excellent operational condition with no visible damage, corrosion, or maintenance concerns. Air handler/coil located in basement was assessed as part of complete system check, with all components functioning properly and meeting manufacturer specifications.

Provided comprehensive estimate for complete HVAC system replacement including air conditioning unit and natural gas furnace for 25-year-old equipment located in basement. The existing Lennox outdoor condensing unit is non-operational and requires replacement, while the furnace replacement is being quoted proactively due to age. Assessed current installation including outdoor unit positioning on concrete pad with gravel base against exterior brick wall, evaluated electrical service connections and metering configuration, and documented equipment specifications to provide accurate replacement options for both heating and cooling systems.

Completed comprehensive Gold AC inspection on 5-year-old residential air conditioning system with air handler located in basement. Performed multi-point inspection of outdoor condenser unit including fan motor operation, electrical connections, refrigerant lines, and cabinet condition. Verified proper operation of all system components, inspected auxiliary equipment including accumulator and electrical disconnect, and confirmed condenser area was clear of debris. System found to be operating within normal parameters with all components functioning properly.

Performed comprehensive assessment of 15-year-old air conditioning system located in basement that was blowing air but not producing cold air, affecting entire home. Documented existing equipment condition through photographic evidence showing aged HVAC unit with visible wear, dust accumulation, and deteriorating components including heat exchanger with metallic fins. Provided replacement estimate for complete system due to age and failure to cool, with customer enrolling in maintenance plan for two pieces of equipment.

Responded to callback for complete system failure affecting both heating and cooling control. Upon arrival, found furnace and smart thermostat completely non-responsive with no power to either unit. Traced electrical circuit from basement furnace location through thermostat wiring and identified loss of power at furnace control board. Inspected 3-year-old furnace unit for tripped breakers, blown fuses, or transformer failure. Restored power to system by addressing electrical fault at furnace, which re-established communication between thermostat and HVAC equipment. Verified proper operation of both air conditioning and heating functions. Confirmed thermostat regained full control capability and tested system cycling. Issue resolved with whole-house climate control restored to normal operation.

Conducted on-site evaluation for boiler replacement in residential basement mechanical room. Existing 15-year-old boiler system assessed, including current hydronic heating configuration with copper piping network, expansion tank, and associated plumbing components. Documented current installation layout featuring wall-mounted boiler unit with PVC exhaust/intake venting, multiple zone valves, pressure relief components, and connection points throughout the distribution system. Photographed existing equipment specifications, piping arrangements, and mechanical room conditions to prepare comprehensive replacement estimate for new boiler installation.

Provided comprehensive replacement estimate for non-operational residential air conditioning system over 10 years old, including outdoor condenser unit and indoor natural gas furnace located in utility room. Assessed existing equipment configuration, photographed current installation showing outdoor condenser with refrigerant line routing and indoor furnace with blower assembly and ductwork connections. Reviewed system specifications and discussed replacement options to restore cooling and heating functionality for the home.

Performed comprehensive boiler inspection in basement mechanical room for new homeowner. Conducted visual assessment of boiler system, expansion tank, venting components, and associated plumbing connections. Verified proper operation of heating equipment, examined ductwork connections, inspected gas piping and safety controls, and documented system condition with photographs for homeowner records.

Responded to no cooling call on 7-year-old Bryant system. Upon arrival, found system completely inoperative with no power to indoor or outdoor units. Discovered failed 3-amp fuse on low-voltage control circuit in air handler. Replaced defective fuse and restored power to system. Verified proper operation of thermostat communication, contactor engagement, and compressor startup. Tested system through complete cooling cycle with normal temperature differential across evaporator coil and proper outdoor unit operation.

Responded to no cooling complaint on 15-year-old air conditioning system affecting entire home. Performed diagnostic testing on outdoor unit using digital multimeter to check electrical components including capacitor, contactor, and associated wiring connections. Found system only circulating air without cooling capability. Identified failed component preventing compressor operation and explained repair options for aging equipment to customer, who elected to enroll in maintenance plan for multiple systems.

Responded to service call for high-pitched noise from air conditioning system during first seasonal use. Performed comprehensive inspection of recently installed HVAC system including air handler, ductwork, and humidifier components located in basement. Examined all mechanical connections, blower assembly, and duct transitions for potential noise sources. Verified proper operation of cooling system, checked refrigerant lines, and inspected humidifier mounting and copper supply line connections. All equipment found to be functioning within normal parameters with no abnormal sounds detected during operation at time of service.

Conducted on-site evaluation for whole home generator installation at residential property. Assessed existing electrical service configuration including dual meter assembly, main service panels, and disconnect equipment mounted on exterior brick wall. Documented current electrical infrastructure and available space for generator placement, confirming compatibility requirements for transfer switch integration with existing 200-amp service. Provided consultation regarding whole home generator options versus portable generator hook-up service based on property type and customer requirements.

Completed comprehensive Gold AC Inspection on a single-zone residential air conditioning system with equipment dating to 1996. The air handler and evaporator coil are located in the utility closet, with the outdoor condenser unit properly positioned on a concrete pad against the exterior brick wall with adequate clearance and professional landscaping for drainage. System was operational at time of inspection, and all components were evaluated according to Gold standard protocols including visual inspection of condenser unit, electrical connections, and surrounding area which was confirmed clear of debris.

Completed comprehensive AC inspection and tune-up on 16-year-old Payne condenser unit located on exterior concrete pad with evaporator coil in basement. Performed full system evaluation including refrigerant levels, electrical connections, capacitor testing, and airflow assessment to ensure optimal cooling performance for the upcoming season. Unit found to be operating within normal parameters with no immediate repairs required at this time.

Responded to service call for central air conditioning system running but not producing adequate cooling. Upon inspection, discovered evidence of refrigerant leak at outdoor condensing unit connections, indicated by oil staining on mounting bracket and surrounding components. Identified leak source at service valve connections, performed leak repair, evacuated system, and recharged unit to manufacturer specifications. Verified proper system operation with temperature differential testing and confirmed return to normal cooling capacity.

Completed Gold AC Inspection on single residential air conditioning system with air handler located in basement. Performed comprehensive maintenance inspection of outdoor condenser unit positioned on concrete pad against exterior brick wall. Unit found in operational condition with standard outdoor weathering present on housing. Inspected condenser coil fins, fan grille assembly, and motor components. Verified system functionality and documented equipment condition through photographic records. Homeowner confirmed system operating properly at time of inspection.

Completed comprehensive HVAC tune-up service on residential system including outdoor condenser unit located on exterior of property and basement equipment. Performed thorough inspection of condenser unit, checking refrigerant levels, electrical connections, and fan motor operation. Conducted complete system evaluation including thermostat functionality, humidifier operation, and hot water tank inspection as requested, with all components found to be operating within normal parameters.

Completed installation of two new white porcelain two-piece toilets in separate bathroom locations per approved estimate. Both fixtures were properly positioned, secured, and connected to existing water supply lines with chrome shut-off valves. All wax ring seals were installed, mounting bolts tightened to specification, and water connections tested for proper operation and leak-free performance.

Completed comprehensive Gold AC inspection on 10+ year old residential air conditioning system with air handler located in basement. Performed thorough visual inspection of HVAC equipment, ductwork, and associated components including furnace unit and metallic duct system. Verified system operational status, documented equipment condition through photographic records, and confirmed proper clearance around condenser unit. All equipment found to be in working order at time of inspection.