Heating and Cooling Clinton Township

Completed comprehensive Gold AC Inspection on a 2-year-old residential air conditioning system with air handler located in basement. Performed diagnostic testing on outdoor condensing unit using digital multimeter to verify electrical performance and system operation. Unit found to be functioning properly with no deficiencies noted during inspection.

Completed comprehensive Gold AC inspection on a two-unit residential HVAC system with equipment over 10 years old. Performed thorough evaluation of Lennox outdoor condenser unit, including inspection of fan assembly, protective wire guard, and top-discharge configuration. Verified proper operation of both units, with air handler/coil located in attic and secondary unit in basement. Inspected condenser mounting, confirmed adequate clearance around unit, and assessed overall equipment condition. All systems verified operational at time of inspection.

Completed comprehensive Gold AC inspection on 10+ year old system with outdoor condenser unit and basement-located air handler. Performed thorough examination of all electrical connections, motor assembly, wiring harnesses, and control components within air handler cabinet. Inspected outdoor condenser unit including fan operation, coil condition, and refrigerant lines. System currently operational with all components functioning as designed. Documented equipment condition through photographic records for maintenance history.

Completed routine maintenance on an 18KW Honeywell residential standby generator per manufacturer specifications. Performed comprehensive inspection of Generac model G0072260 unit, including visual examination of all major components, verification of electrical connections, and documentation of unit specifications and serial number information. System operational and functioning within normal parameters.

Completed comprehensive tune-up service on 14-year-old furnace and air conditioning system located in basement, along with hot water tank flush service. Performed full system inspection and maintenance on both heating and cooling equipment. During inspection, identified significant rust and corrosion on copper refrigerant line within AC unit, as well as rust present on internal mounting bracket in furnace compartment, indicating potential moisture exposure concerns. Documented all electrical connections, gas valve operation, and circulation pump functionality. All systems tested and confirmed operational at time of service completion.

# Outdoor Spigot Replacement Replaced two exterior hose bibs mounted on brick wall surfaces. Removed existing worn spigots and installed new frost-free sillcocks with brass adapters and shutoff valves. Addressed compromised mounting points on weathered masonry by securing fixtures with appropriate anchoring hardware. Verified proper water flow, tested for leaks at all connection points, and confirmed operational functionality of both replacement units. All plumbing connections sealed and secured to prevent future water intrusion.

Completed conversion of bathtub drain assembly from trip lever style to lift-and-turn type mechanism. Replaced existing half bath faucet with new fixture, including installation of brushed metal cross-handle faucet assembly on bathroom sink. Inspected existing shower/tub area, noting significant deterioration of fiberglass surface coating with extensive peeling and exposure of underlayer material. Verified proper operation of all new components and confirmed drainage function on both fixtures.

Completed Gold AC inspection on a 6-year-old Daikin DX13L2AF system with air handler located in basement. Unit was reported as non-operational at time of service. Performed comprehensive system evaluation including visual inspection of outdoor condenser unit, evaporator coil, and air filtration system. Documented equipment nameplate data and current operating specifications. Inspected air filter element showing pleated media in radial configuration. Captured photographic documentation of equipment condition and manufacturer identification for service records.

Completed comprehensive Gold AC Inspection and tune-up on a 4-year-old Daikin air conditioning system located in the backyard. Performed full system evaluation including refrigerant level check, electrical component testing, condenser coil cleaning, and airflow assessment. Unit is operating within manufacturer specifications with no immediate repairs needed; system is properly maintained and positioned on a stable concrete pad with adequate clearance for optimal performance.

# Plumbing Service - Tanked Water Heater Responded to service call for 50-gallon power vent water heater experiencing no hot water production. Unit was a 2017 manufactured tank, approximately 7 years old, installed in 2019, and currently out of warranty. Upon arrival, confirmed no visible leaks or external damage to the unit. Performed comprehensive diagnostic evaluation of the water heater system. Inspected electrical connections at the GFCI outlet and verified proper power supply to the unit. Examined the power vent system components and verified proper operation. Checked the gas supply line connections and pressure specifications, noting the unit's 22,000 BTU input rating per manufacturer specifications. Evaluated the tank's Category III venting system for proper installation and clearances. Assessed the control board, thermostat settings, and safety mechanisms including the thermal cutoff switches. Verified compliance with flammable vapor ignition resistance requirements as indi

Completed comprehensive Gold AC inspection on 13-year-old residential HVAC system with furnace located in basement. Performed thorough evaluation of outdoor condenser unit positioned on isolation pad against exterior brick wall, inspecting cylindrical unit with vertical grille fins and top-mounted fan assembly. Verified proper operation of all electrical components including dual run capacitor assembly, contactor relay unit, and associated wiring connections with multiple colored conductors. Inspected refrigerant line set routing along exterior wall to disconnect box penetration point. All electrical terminals, spade connectors, and control circuits examined for proper connections and signs of wear. System operating within normal parameters with no immediate service needs identified. Documented equipment condition through photographic records showing capacitor assembly, contactor unit, and exterior condenser placement. Unit showing age-appropriate wear with minor dust accumulation on e

Completed full HVAC system installation including a 70,000 BTU furnace, 3-ton air conditioning unit with rear discharge configuration, and whole-home humidifier. Performed system flush, established new refrigerant lines, and reconnected existing electrical service at the breaker panel. Installed and programmed new Emerson digital thermostat for precise climate control, verified all electrical connections, and tested complete system operation to ensure proper heating and cooling functionality.

Completed comprehensive Gold AC Inspection of residential HVAC system, including evaluation of Lennox furnace unit with integrated humidifier and ductwork components. Verified thermostat operation displaying proper temperature readings at 71°F, confirmed all system controls functioning correctly, and documented equipment condition with no immediate service concerns identified.

# HVAC Maintenance Agreement Service Completed Performed scheduled commercial HVAC maintenance agreement service on Bryant Plus 90 furnace system with air handler/evaporator coil unit located on main floor. Conducted comprehensive inspection of all system components including furnace, air handler, condensate drainage system, and associated controls. Verified proper operation of equipment, documented system specifications from manufacturer labels (Model: CNPVP4821LA6AAA), and captured photographic documentation of equipment condition and warning labels for service records. System operational and in good working order upon completion of maintenance visit.

Performed preventive maintenance tune-up on a 9-year-old Lennox AC unit, model 13ACXN024-230A23. System was operational upon arrival and located in exterior side yard on concrete pad. Conducted comprehensive inspection of outdoor condensing unit, verified proper electrical connections at disconnect and meter panel, and documented equipment nameplate specifications including refrigerant charge of HFC-410A at 3 lbs 12 oz. Unit tested and confirmed in proper working condition following tune-up procedures.

Completed installation of a 3-ton rear-discharge air conditioning system with matching evaporator coil, connecting to existing Carrier furnace in basement mechanical room. Mechanical permit was requested and all work performed to code specifications, with system reconnected and operational upon completion.

Completed full system replacement estimate for 16-year-old HVAC equipment with air handler/coil located in first floor closet. Documented existing system conditions including severely corroded refrigerant lines on exterior with significant rust deterioration, multiple utility penetrations through building envelope with accumulated debris at foundation level, and electrical service routing along exterior wall. Advised property owner that condenser area must be cleared of debris and animal waste prior to installation, and confirmed inspection scheduling is weather-dependent with minimum 65-degree temperature requirement for accurate equipment evaluation.

Completed Gold AC Inspection on 16-year-old Lennox air conditioning system with outdoor condenser unit and first floor closet air handler. Performed comprehensive system evaluation including visual inspection of condenser unit, which showed dirt accumulation on top panel and surrounding area requiring debris clearance. Evaporator coil inspection revealed heavy soiling with significant dust, dirt, and debris buildup throughout finned surfaces, along with cobweb accumulation affecting airflow efficiency. Documented equipment condition through photographic evidence showing condenser unit positioning on grade with proper clearances and electrical disconnect box mounting. Advised customer on necessary maintenance recommendations including condenser area clearance from debris and animal waste, and noted evaporator coil cleaning requirements to restore optimal system performance and efficiency.

Completed Gold AC Inspection on a 2-year-old residential air conditioning system with air handler located in basement and condenser unit positioned on exterior gravel pad. Performed comprehensive system evaluation including visual inspection of outdoor condenser unit, which showed clean exterior surfaces, properly secured fan assembly, and no visible signs of damage, rust, or deterioration. Advised homeowner that air filter replacement is required for optimal system performance.

Completed Gold Furnace Inspection on a 9-10 year old HVAC system. Performed comprehensive combustion analysis using Testo 310 analyzer, which confirmed proper operation with readings of 115°F and 5 ppm carbon monoxide levels, indicating safe and efficient combustion. Inspected associated water heater manufactured by Bradford White Corporation, verified all safety labels and warning placards were intact and legible, and confirmed proper copper piping connections were secure with no visible leaks or corrosion.