Heating and Cooling Ferndale

Completed comprehensive Gold AC Inspection on a 5-year-old outdoor condenser unit. Performed full system evaluation including inspection of condenser coils, fan motor operation, refrigerant levels, electrical connections, and capacitor function. Cleaned debris from unit exterior and surrounding area, verified proper airflow through condenser coils, and confirmed system is operating within normal parameters for optimal cooling performance.

Conducted comprehensive assessment of 35-year-old residential HVAC system for complete replacement estimate. Evaluated outdoor air conditioning condenser unit positioned on concrete pad against exterior wall with existing electrical disconnect and PVC drainage, noting advanced age and condition of equipment. Inspected basement furnace installation, documented existing electrical service configuration with dual meter setup, and photographed current system components to provide accurate replacement specifications for both heating and cooling equipment.

Performed routine tune-up maintenance on 8-year-old dual-zone mini-split system serving two upstairs bedrooms. Inspected outdoor condensing unit, refrigerant lines, and service valves; noted weathered line insulation with biological growth requiring future attention. Addressed uneven cooling concerns between zones and evaluated system sequencing to prioritize master bedroom operation over secondary bedroom per occupant request.

Responded to no cooling call on outdoor condensing unit. Upon arrival, found unit with significant weathering and corrosion, including heavily rusted fan guard and deteriorated exterior components. Performed diagnostic testing with multimeter to assess electrical functionality and compressor operation. Documented extensive rust damage on fan guard assembly, mounting hardware, and housing, along with heavily soiled condenser coil filter requiring cleaning or replacement for proper airflow and system efficiency.

Responded to service call for central air conditioning system experiencing inadequate cooling and ice formation on refrigerant lines. Upon arrival, conducted visual inspection of outdoor condenser unit and associated components. Observed ice buildup on suction line, indicating potential refrigerant flow restriction or low charge condition. Checked system operation and verified unit was running but not achieving proper cooling capacity. Inspected condenser coil, fan operation, and electrical connections. Evaluated refrigerant line insulation and condensate drainage system. Documented equipment condition through photographs showing outdoor heat pump unit on concrete pad with PVC condensate piping, insulated refrigerant lines, and top-mounted fan assembly. Unit appeared in generally well-maintained condition with no visible signs of significant physical damage or corrosion. Identified ice formation issue as likely caused by restricted airflow, low refrigerant charge, or metering device ma

Completed comprehensive Gold AC inspection on a 1-year-old Lennox outdoor condensing unit. Verified system operational status, inspected fan assembly and protective grille, and documented equipment condition with the air handler/coil located in the basement. All components functioning properly with no deficiencies noted during the maintenance inspection.

Completed site assessment for central air conditioning installation at residence with existing forced-air heating system. Evaluated outdoor placement area adjacent to home with light green siding, noting disturbed soil conditions and existing utility markings indicating previous or planned excavation work. Assessed clearance requirements around proposed condenser location near small tree and verified adequate space for equipment installation and future service access. Inspected existing electrical panel in utility area to confirm capacity and availability for new AC system requirements. Documented current electrical infrastructure including circuit breaker configuration and panel specifications to determine compatibility with proposed air conditioning unit and disconnect requirements. Photographed installation site conditions and electrical service panel for estimate preparation.

Completed comprehensive HVAC tune-up inspection on 2-year-old basement system, including thorough evaluation of heating equipment, humidifier operation, and thermostat functionality. Verified Sensi digital thermostat displaying proper temperature readings at 67°F with heat/cool mode controls operating correctly. Inspected water heater connections, exhaust venting, and safety valves with green handle valve confirmed in proper position; noted HVAC filter available on-site for replacement.

Completed installation of 1.5 ton air conditioning system with evaporator coil in residential utility space. Installed new air handler unit, connected refrigerant lines with proper insulation, established condensate drainage via PVC piping, and integrated ductwork with existing distribution system. Electrical reconnection required by licensed electrician to finalize system commissioning per permit requirements.

Completed comprehensive Gold AC Inspection on 10+ year old residential air conditioning system with outdoor condenser unit and basement-located air handler. Performed thorough multi-point inspection of all system components, verified operational status of equipment, examined refrigerant lines with foam insulation, inspected electrical connections and controls, checked condensate drainage, evaluated airflow and system performance, and documented equipment condition through photographic records. All components found to be functioning properly at time of inspection.

Performed system start-up and commissioning on recently installed air conditioning system. Connected diagnostic manifold gauges to outdoor condenser unit and verified refrigerant pressures, temperatures, and system performance parameters to ensure proper operation and manufacturer specifications are met.

Completed comprehensive HVAC system replacement estimate for residential property. Assessed existing air handler unit installed in attic space with reflective insulation and basement furnace installation with galvanized ductwork, copper refrigerant lines, and PVC condensate drainage. Documented current equipment configuration, ductwork routing, and mechanical components to provide accurate replacement specifications for complete system upgrade.

Conducted on-site assessment for complete air conditioning system replacement at small residential property under 1500 square feet. Evaluated existing cooling unit location, electrical service capacity at meter panel, and exterior mounting area along foundation. Documented current system configuration including conduit routing and power supply connections to provide accurate replacement specifications and equipment recommendations.

Completed prepaid maintenance inspection on residential air conditioning system. Unit confirmed operational with 7-year-old evaporator coil located in garage. Performed standard system evaluation, documented equipment condition with photographs showing outdoor condenser unit and secondary HVAC equipment in proper working order with all components and refrigerant lines intact.

Provided comprehensive estimate for HVAC system replacement at residential property with 18-year-old equipment. One air conditioning unit currently non-operational while second unit remains functional. Assessment revealed significant frost and ice buildup on evaporator coil assembly located in basement, indicating potential refrigerant leak, restricted airflow, or system failure. Existing natural gas furnace with coil assembly, PVC condensate drainage system, copper refrigerant lines, and metallic ductwork evaluated for replacement options. Documented current installation configuration including air handler, evaporator coil with extensive frost accumulation, and associated mechanical components for equipment sizing and replacement specifications.

Completed comprehensive Gold-level air conditioning inspection on a 10+ year old system with outdoor condenser unit and basement-located air handler/coil. Performed thorough evaluation of all system components including refrigerant lines, electrical connections, condenser operation, and overall equipment condition. Unit showed normal wear consistent with age; all safety checks passed and system operating within manufacturer specifications.

Completed full HVAC system installation including 45,000 BTU furnace and 1.5 ton air conditioning unit with humidifier in rear yard location. Coordinated mechanical and electrical permits, submitted utility rebate applications to Consumers Energy and DTE, and verified AHRI certification number 217454512. Reconnected all gas, electrical, and refrigerant lines, with electrical work completed by licensed electrician as required.

Conducted site assessment for mini split installation in living room and primary bedroom of residence currently served by 21-year-old boiler with no existing cooling system. Evaluated exterior mounting locations, photographed potential condenser placement areas and existing electrical infrastructure including red conduit routing on exterior wall. Documented site conditions including foundation access points, siding configuration, and clearance requirements for outdoor unit installation to prepare comprehensive estimate for dual-zone ductless heat pump system.

Completed full HVAC system replacement in basement of small residential property (0-1500 sq.ft.). Removed existing equipment and installed new natural gas furnace with air handler unit and added new air conditioning system to provide complete heating and cooling capability. Configured ductwork connections including flexible and rigid components, routed refrigerant lines, and integrated system with existing infrastructure. All equipment mounted, leveled, and secured per manufacturer specifications with proper clearances maintained for service access and code compliance.

Completed comprehensive Gold AC Inspection on an 11-year-old air conditioning system with air handler/coil located in basement. System was operational at time of inspection. Advised customer that area surrounding outdoor condenser unit requires clearing of debris and animal waste, as litter boxes with waste were observed in close proximity to HVAC equipment. Performed complete system evaluation including visual inspection of ductwork, air handler components, and overall equipment condition. Customer was informed that weather conditions can affect inspection parameters, requiring rescheduling if temperatures fall below 65 degrees or during precipitation.