Heating and Cooling Harper Woods

Completed comprehensive Gold AC Inspection on residential air conditioning system. Performed full system diagnostics using calibrated testing equipment to measure refrigerant levels, electrical performance, and overall unit operation. Documented unit condition with detailed photography showing Flame Furnace-serviced condenser unit in good working order with normal seasonal wear, proper installation on pad, and secure refrigerant line connections.

Responded to service call for 6-7 year old water heater with no hot water production and active leak. Upon inspection, diagnosed failed heating element and compromised tank integrity. Evaluated unit condition, shut-off valves, copper supply lines, and venting system. Determined water heater required replacement due to age and extent of damage. Installed new residential water heater with proper venting, connected copper supply lines with new shut-off valves, verified all connections for leaks, and tested unit operation to confirm proper hot water delivery.

Completed comprehensive Gold AC inspection on single-unit Lennox system approximately one year old with air handler located in basement. System currently operational with thermostat set to heat at 70°F and cool at 82°F, displaying indoor temperature of 71°F with 39% humidity. Performed full visual inspection of furnace unit, air handler, PVC intake/exhaust venting, ductwork, and associated HVAC components in basement utility area. Verified proper operation of all equipment, checked connections, and documented system condition through photographic records. All components functioning within normal parameters at time of inspection.

Completed comprehensive tune-up and inspection on 6-year-old furnace unit located in basement. Performed visual inspection of all internal components including blower motor assemblies, electrical connections, control board wiring, and capacitor; verified proper wire routing and terminal connections across all colored control wires. All components found operating within normal parameters with no immediate service needs identified.

Completed installation of fluorescent light fixture in utility area ceiling space. Mounted fixture to junction box with proper securing hardware and verified electrical connections. Installed diffuser cover and tested operation to ensure proper illumination. All work performed to code specifications with clean professional finish.

Completed comprehensive cooling maintenance and AC tune-up on an 8-year-old residential air conditioning system. System was operating properly upon arrival and confirmed to be functioning correctly throughout the inspection. Performed standard preventive maintenance procedures on the outdoor condensing unit, including inspection of the fan assembly, verification of proper airflow through the louvers, and assessment of overall equipment condition. Unit showed no signs of deterioration and all components were found to be in good working order.

Completed full HVAC system installation including new air conditioning unit and evaporator coil. Installed condensate pump with white PVC drain lines and proper drain pan for moisture management. Ran and secured refrigerant lines with appropriate insulation and mounting hardware. Connected electrical wiring and power supply to all components. Verified all connections, tested system operation, and confirmed proper drainage from condensate pump. Installation included APCO air purification system integration. Permit was requested for the installation work. System checked and confirmed operational upon completion.

Completed comprehensive tune-up inspection on basement-located HVAC system, including thorough evaluation of humidifier, thermostat, and gas-fired water heater. Inspected 40-gallon natural gas water heater (Model PSG40G-36N04162, Serial NAH020B187S1, manufactured June 2022) and verified proper safety labeling and compliance with flammable vapor warnings. All components inspected and found to be operating within normal parameters.

Completed comprehensive HVAC system evaluation on 16-year-old air conditioning system experiencing progressive refrigerant loss over two consecutive years and failing contactor. Performed Gold AC inspection on single-unit residential system with basement-located air handler, documenting exterior condenser unit mounted near brick wall structure and interior mechanical equipment configuration. Provided replacement estimate recommendations based on age of equipment, recurring refrigerant deficiency, and electrical component failure.

Performed seasonal AC startup and system inspection on residential HVAC unit. Accessed and examined furnace control board assembly, verifying proper operation of electronic components, capacitors, and digital display indicators. Confirmed all wire connections at terminal blocks were secure and all safety controls were functioning correctly. Inspected complete furnace installation including PVC condensate drain lines, combustion air intake/exhaust venting, and condensate pump operation. System tested and confirmed operational for cooling season.

Completed comprehensive tune-up inspection on basement-located HVAC system of unknown age. Performed diagnostic testing of system performance parameters including CO2 levels, humidity readings, and temperature measurements using calibrated digital meter. Inspection included thorough evaluation of humidifier operation, thermostat functionality, air handler components, and hot water tank condition, with replacement of air filter as part of standard maintenance protocol.

Responded to service call for complete copper piping replacement in residential basement following theft of existing plumbing infrastructure. Conducted thorough assessment of remaining plumbing systems, including inspection of ceiling-mounted pipe runs, existing PVC drainage lines, and connection points. Documented current conditions showing exposed joists, partial copper piping with brass valves, red-handled shutoff valve, and white PVC sections requiring integration with new copper installation. Evaluated bathroom fixture connections including toilet, vanity sink with chrome faucet, and associated supply lines to determine scope of repiping required. Photographed existing plumbing configuration, valve locations, pipe routing through floor joists, and fixture rough-in points to develop comprehensive estimate for new copper piping system installation throughout basement and bathroom areas.

Completed comprehensive Gold AC Inspection on residential 10+ year old air conditioning system. Performed complete evaluation of outdoor condenser unit, which showed good overall condition with proper airflow through ventilation louvers and functional fan assembly. Verified refrigerant lines properly insulated and secured, confirmed adequate clearance around unit with landscaping appropriately maintained away from equipment. Inspected basement-located air handler and coil assembly. Provided 16x25x5 media filter replacement as part of preventative maintenance protocol. All system components operating within normal parameters at time of inspection.

Responded to a residential property undergoing remodeling where copper piping had been stolen from the hot water boiler system. Conducted diagnostic evaluation of the existing boiler and remaining mechanical components in the basement, including assessment of the pressure tank, circulator pump, and electrical panel. Provided two estimate options: complete boiler and piping replacement to restore the existing hot water heating system, or full conversion from hot water boiler to forced air heating system with new ductwork throughout the home.

Performed diagnostic evaluation on basement-located furnace to assess equipment condition and determine repair versus replacement recommendations. Conducted thorough inspection of heating system, including visual assessment of furnace components, ductwork connections, and associated plumbing infrastructure in basement ceiling area. Documented equipment condition through photographic evidence showing exposed joists, utility piping, and structural elements surrounding the HVAC installation for comprehensive evaluation and estimate preparation.

Responded to a no hot water complaint affecting the property for two weeks. Upon inspection, discovered a failed gas valve assembly with significant corrosion on electrical connections and mounting hardware. The gas valve showed evidence of moisture exposure leading to terminal degradation. Verified furnace ignition system was operational with visible flame present in combustion chamber. Documented corroded wiring and compromised valve components for replacement recommendation.

Completed comprehensive tune-up and maintenance service on basement-located heating system including boiler, tanked water heater, and Navien tankless water heater, all over 10 years old. Performed full system inspection, flushed tankless unit to remove mineral buildup and ensure optimal performance, and verified proper operation of burner assembly and pilot components. All equipment tested and confirmed operational upon service completion.

Performed AC system start-up on outdoor condenser unit and basement evaporator coil. Verified proper operation of compressor, condenser fan motor, and refrigerant circuit. System tested and confirmed operating within manufacturer specifications.

Conducted on-site assessment of non-operational natural gas furnace located in basement. Evaluated existing 10+ year old heating system showing significant age-related deterioration, dust accumulation, and general wear. Documented current equipment configuration including furnace unit, thermostat, and ductwork to provide comprehensive replacement estimate for new gas-fired heating system.

Provided comprehensive estimate for complete furnace replacement system in basement mechanical room. Existing 10+ year old natural gas furnace is non-operational and requires full replacement. Evaluated existing ductwork configuration, venting requirements, electrical connections, and condensate drainage system to determine proper equipment specifications and installation requirements for new high-efficiency heating system.