Heating and Cooling Harper Woods

Completed comprehensive Gold AC inspection on 8-year-old residential air conditioning system with outdoor condensing unit and basement air handler. Performed full system evaluation including refrigerant pressure checks, electrical component testing, condenser coil cleaning to remove debris and leaf buildup, verified proper airflow through unit, and confirmed all safety controls functioning within manufacturer specifications. System operating efficiently with no immediate service needs identified.

Responded to service call for bathtub leak and clogged bathroom sink. Upon inspection, identified leak source requiring access panel installation in wall cavity to reach supply lines. Cut access opening in drywall to expose plumbing infrastructure, revealing vertical copper supply pipes and connection points behind tub fixture. Addressed leak at pipe connection, cleared sink drainage obstruction, and verified proper operation of three-handle tub fixture assembly and chrome spout. Both fixtures tested and confirmed operational upon completion.

Completed installation of 2.5-ton air conditioning system with uncased evaporator coil in left-side configuration. Reconnected electrical and mechanical systems to existing ductwork in basement utility area. Installed condensate pump with PVC drain lines and verified proper operation of all components. Permits requested for mechanical, electrical, and air conditioning work per code requirements.

Responded to service call for reported water leak on 30-year-old furnace unit located in basement laundry room. Upon inspection, identified leaking from aged copper plumbing connections associated with the heating system. Inspected multiple vertical copper supply lines running through wall framing, noting significant oxidation and wear consistent with equipment age. Examined shut-off valve with red handle and associated brass fittings for integrity. Evaluated condition of pipe insulation, including deteriorated foam sections requiring attention. Performed electrical diagnostics on associated HVAC components using clamp meter to verify system operation and rule out condensate pump or humidifier issues as leak source. Documented existing plumbing configuration and leak location for repair recommendations given the advanced age of the equipment and infrastructure.

Provided estimate for complete air conditioner replacement system in basement location. Current 30-year-old unit is non-operational and requires full replacement. Assessment included evaluation of existing natural gas furnace compatibility, basement installation parameters, and necessary new refrigerant line routing as indicated in utility room ceiling area.

Responded to customer complaint of inadequate cooling from 10-year-old air conditioning system with equipment located in basement. Performed comprehensive system inspection and diagnostic evaluation of existing HVAC unit, including assessment of outdoor condensing unit, interior thermostat functionality showing 84-degree reading, and overall system performance. Provided full system replacement estimate options to address cooling deficiency and aging equipment concerns.

Completed comprehensive Gold AC Inspection on 10-year-old Lennox air conditioning system with air handler located in basement. Performed full system evaluation of outdoor condenser unit, verified operational status, inspected refrigerant lines, checked electrical connections, and assessed overall equipment condition. Unit found operating properly with no immediate concerns noted during inspection.

Responded to no cooling complaint on 6-year-old AC unit located in basement. Upon arrival, discovered significant water damage and active flooding in equipment area requiring immediate extraction with wet/dry vacuum before accessing system. Unable to complete diagnostic evaluation of air conditioning unit due to unsafe working conditions from water intrusion; recommended addressing water damage and drainage issues before proceeding with HVAC system assessment.

Responded to warranty call for one-month-old cooling system producing banging noise every 5-10 minutes upon startup. Inspected basement-installed HVAC equipment including air handler and associated components. Evaluated White-Rodgers programmable thermostat operation and system cycling patterns. Documented equipment configuration with furnace/air handler unit, condensate pump assembly, and PVC drainage connections. Identified and resolved mechanical issue causing intermittent noise during compressor engagement. Verified proper system operation, confirmed quiet startup cycles, and tested thermostat programming functionality to ensure normal cooling performance.

Responded to no cooling complaint on 10-year-old AC unit located in basement. Upon inspection, identified failed blower motor preventing proper air circulation through the system. Replaced defective motor with new unit, restored full system operation, and verified adequate airflow and cooling performance before completing the service call.

Completed full HVAC system installation including a 70,000 BTU furnace and 2.5 ton rear-discharge air conditioning unit in basement mechanical room. Installed new thermostat, humidifier, and furnace liner, reconnected all ductwork with proper metallic flexible ducting, and integrated white PVC condensate drainage system. Coordinated electrical work requirements and obtained mechanical and electrical permits for the installation, with utility rebate documentation processed and AHRI certificate number recorded for system efficiency verification.

Completed comprehensive AC tune-up on residential cooling system. Performed standard maintenance procedures including inspecting outdoor condenser unit, checking refrigerant levels, cleaning coils, testing electrical connections, and verifying proper system operation. System found to be functioning properly with no immediate issues identified; customer advised regarding airflow concerns in two rooms for potential future assessment.

Completed comprehensive Gold AC inspection on 8-year-old residential air conditioning system with air handler located in basement. Performed thorough evaluation of outdoor condenser unit, which showed normal wear consistent with age and outdoor exposure, verified proper clearance around unit, and confirmed system operational status. Documented equipment condition through photographic records showing condenser positioned against fence line with adequate ventilation access and specification plate visible for reference.

Responded to no cooling complaint on 5-year-old Daikin air conditioning system. Upon arrival, verified thermostat call for cooling but found no airflow from indoor unit while heating mode operated normally. Diagnosed failed indoor blower motor capacitor causing blower failure in cooling mode. Replaced defective capacitor, restored proper blower operation, and confirmed system cooling effectively with appropriate airflow and temperature differential across evaporator coil.

Completed comprehensive Gold AC inspection on 3-year-old single-unit air conditioning system with air handler located in basement. Verified system operational status, inspected outdoor condenser unit positioned on concrete pad with proper clearance, examined electrical disconnect box mounted on exterior brick wall, and confirmed all components functioning within normal parameters. Documented equipment condition through photographic records showing condenser unit, disconnect switch, and surrounding area with minor vegetation growth present but not obstructing airflow or access.

Performed comprehensive leak search on HVAC system as directed, with replacement compressor, TXV, service valve, and filter drier scheduled for installation upon delivery. Documented system pressures using differential pressure gauge, measuring 0.28 inWG at 504 reading, and referenced manufacturer blower performance data for Lennox EL297UH series furnaces to verify proper airflow specifications across multiple static pressure ranges. All defective warranty components tagged and prepared for return to supplier per warranty claim requirements.

Completed Gold AC Inspection on a 2-year-old residential air conditioning system with air handler located in basement. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of fan assembly and motor, checked refrigerant levels, inspected electrical connections, and confirmed adequate airflow through coil and grille assembly. All components found operating within normal parameters with no deficiencies noted at time of inspection.

Conducted on-site assessment for complete HVAC system replacement in a small residential property under 1500 square feet. Evaluated existing furnace and air conditioning equipment located in basement utility area, noting aged ductwork with metallic insulation and current beige-colored HVAC unit. Inspected electrical service panel and circuit breaker configuration to ensure adequate power supply capacity for new heating and cooling equipment installation. Documented existing system layout, ductwork conditions, and electrical infrastructure to prepare comprehensive replacement estimate for natural gas furnace and central air conditioning system.

Completed comprehensive Gold AC inspection on a 9-year-old residential cooling system with air handler located in basement. Performed full system evaluation of outdoor condenser unit and verified equipment operational status, confirmed proper clearances around condenser unit, and documented system condition through photographic documentation showing unit positioned on maintained lawn area with adequate ventilation space.

Responded to no-cooling complaint on 7-month-old Lennox CK40CT-24B-71 condensing unit. Upon arrival, confirmed indoor blower motor operational but outdoor condenser not energizing. Inspected outdoor unit and verified proper power supply at disconnect box. Diagnosed faulty contactor preventing compressor and condenser fan engagement. Replaced defective contactor, tested system operation, and confirmed proper cooling cycle restored. Unit operating within normal parameters upon departure, covered under manufacturer warranty.