Royal Oak, Michigan, is a vibrant place to live with all four seasons, including icy cold winters and hot humid summers. Residents here know far too well how important it is to have a well-functioning HVAC system to keep their home or business comfortable all year long.
At FLAME Heating, Cooling, Plumbing, and Electrical, we’re proud to be Royal Oak’s number one home servicer. Our technicians provide top-quality HVAC, plumbing, and electrical maintenance services, installations, repairs, and replacements that best suit your home and budget.
Common HVAC Problems and Services We Offer
When faced with grueling weather conditions, HVAC systems in Royal Oak, Michigan, work hard to provide comfortable temperatures. Harsh weather, old age, and wear and tear are the most common culprits behind HVAC problems. The services we offer are:
Air Conditioning Services
AC Repair
We repair broken air conditioners, whether it’s a broken compressor, refrigerant leak, or any other cooling problem your home is having.
AC Installation
Our expert experience in installing air conditioners for residential and commercial properties makes us confident in ensuring optimal comfort and energy efficiency. We offer state-of-the-art equipment and industry-leading name-brand products to suit any space.
AC Maintenance
Royal Oak gets a good amount of rain, and homes are often affected by wet and harsh weather conditions. Our team can perform routine AC maintenance to make sure it performs as it should, regardless of the elements.
Heating Services
Heating Repair
We can repair your furnace or boiler if they’re not delivering warm air as they should. We have experience working with all types of makes and models in Royal Oak, MI, to get you through the harsh and cold winters.
Heating installation
Along with repairs, we can replace or install a new furnace that offers energy-efficient heating to save you money on your energy bill while providing quality heating throughout your home.
Heating Maintenance
Maintaining your furnace is just as important as maintaining your air conditioner system. We can check for any damages or faulty components and recommend any repairs or replacements.
Commercial HVAC Solutions in Royal Oak, MI
For businesses and commercial properties in Royal Oak and surrounding areas, maintaining indoor temperatures is essential for employee comfort, productivity, and customer satisfaction. At FLAME, we provide comprehensive commercial HVAC solutions that ensure proper ventilation, good air quality, and consistent temperatures. With our commitment to quality and customer satisfaction, businesses in Royal Oak, MI, can trust FLAME to keep their commercial spaces comfortable, reliable, and efficient all year round.
Plumbing Services
At FLAME, we understand the critical role that plumbing and pipework play in maintaining the functionality of your home or business. Our comprehensive plumbing services cover everything from repairs to installations and maintenance to ensure your plumbing system operates smoothly.
General Plumbing Repairs
For general plumbing repairs, our skilled technicians address issues associated with:
- Leaks
- Pipes
- Garbage disposals
- Sewer lines and drains
- Water heater repair
- Sump pumps
Plumbing Installations
We provide expert advice and efficient installation services that include:
- Plumbing fixtures
- Garbage disposals
- Gas lines
- Sewer lines and drains
- Water heaters
- Sump pumps
Plumbing System Maintenance
To keep your plumbing system in top condition, we offer maintenance services that include:
- Leak detection
- Backflow prevention
- Drain cleaning
- Water heaters
- Sump pump
Why Hire a Professional Plumber in Royal Oak, MI
Hiring a professional plumber ensures that your plumbing issues are addressed with expertise and precision. In Royal Oak, MI, entrusting your plumbing needs to a qualified professional guarantees efficient repairs, installations, and maintenance services. With their training and experience, professional plumbers can accurately diagnose problems, provide effective solutions, and ensure that repairs are conducted safely. Whether you’re dealing with leaks, clogged drains, or complex plumbing installations, hiring a professional plumber in Royal Oak ensures peace of mind and long-lasting results.
Royal Oak Commercial Plumbing Services
If you have a business or commercial property in Royal Oak, MI, investing in reliable commercial plumbing services is essential, especially when you need it most. With FLAME, businesses in Royal Oak have access to comprehensive commercial plumbing services, from routine maintenance and repairs to large-scale installations and upgrades. We work with all types of commercial properties and ensure that your plumbing system operates efficiently and meets industry standards.
Electrical Services
When it comes to maintaining the electrical systems in your home or business in Royal Oak, MI, trust FLAME to provide honest and professional electrical services tailored to your needs. Our team of skilled electricians specializes in updating electrical equipment to enhance efficiency and minimize the need for repairs.
Electrical Repairs and Installations
If you’re planning a remodel or simply need electrical repairs or installations, we handle:
- Outlets
- Wiring/rewiring
- Lighting
Indoor and outdoor:
- Ceiling fans
- Smart home devices
- Surge protectors
- Electrical code update
Electrical Inspections & Special Services
We ensure that your electrical system meets current safety standards and codes for:
- Electrical Panels
- Circuit breakers
- Home generators
Electrical Commercial Services in Royal Oak, MI
For businesses and commercial properties in Royal Oak, MI, maintaining a reliable electrical system is crucial for daily operations. At FLAME, we understand the unique electrical needs of commercial properties and offer a range of services to keep your business running smoothly. Whether you need wiring for new construction, lighting upgrades, or electrical panel maintenance, our experienced electricians are equipped to handle projects of any size.
About Royal Oak, Michigan
Royal Oak, Michigan, started as a small township in 1891 with only a couple hundred residents. Today, downtown Royal Oak includes several parking garages, a new police station, a 30,000-square-foot city hall, the Royal Oak Music Theatre, and so much more. This town is full of diverse entertainment options, making Royal Oak an amazing place to live and visit. Most recently, the Royal Oak Historical Society received a proclamation for their discovery of new information and history of the Underground Railroad network in Oakland County. With innovation at heart, Royal Oak is a hub for all types of people and interests.
Why Royal Oak Residents Choose FLAME
- Licensed and Insured
- Background Checks on Techs
- Emergency Services Available
- Free In-Home Estimates
- 100% Satisfaction Guaranteed
Call FLAME for All Your HVAC, Plumbing, and Electrical Services
When it comes to maintaining the comfort, functionality, and safety of your home or business, FLAME is your trusted partner for HVAC, plumbing, and electrical services. With our team of skilled technicians and commitment to quality service, you can count on us to handle all your needs efficiently and reliably. Whether you need a new HVAC system installed, plumbing repairs, or electrical upgrades, FLAME has you covered. Contact us today for expert assistance with all your HVAC, plumbing, and electrical needs.
Recent Jobs and Reviews in Royal Oak , MI
Job Locations and Reviews
Completed comprehensive HVAC tune-up inspection on a one-year-old system with equipment located in basement. Performed thorough evaluation of outdoor condenser unit, confirmed proper operation of fan assembly and heat exchanger coils with no visible damage or deterioration noted. Inspection included full assessment of humidifier, thermostat functionality, and hot water tank to ensure all components operating within normal parameters.
Completed annual Gold AC maintenance inspection on residential outdoor condenser unit positioned against brick exterior. Performed comprehensive system tune-up including cleaning condenser coils, checking refrigerant levels, testing electrical connections and capacitors, inspecting fan motor operation, verifying proper airflow through grille assembly, and confirming unit is operating efficiently on concrete paver pad with proper clearances. All components found functioning within normal parameters with no immediate service needs identified.
Conducted site assessment for new mini split system installation in upstairs bedroom with no existing HVAC equipment. Evaluated attic space for condenser line routing and confirmed adequate structural support for indoor air handler wall mounting. Inspected proposed installation location in bedroom and documented existing conditions. Photographed attic access point, available workspace, and designated wall mounting area to develop comprehensive installation plan and equipment specifications for customer approval.
Completed comprehensive Gold AC inspection on 8-year-old Amana condensing unit located on exterior concrete pad. Performed multi-point system evaluation including visual inspection of condenser cabinet, fan grille, refrigerant line connections, electrical disconnect box, and condensate drain piping. Unit found in operational condition with proper airflow through louvers, secure mounting on pad, and adequate clearances from structure. Verified PVC condensate line routing and confirmed electrical connections at disconnect box. System operating as designed with no immediate service requirements identified during inspection.
Completed installation of chrome two-handle bathroom faucet with porcelain lever handles on existing white porcelain sink. Verified proper water flow, tested both hot and cold supply lines, and ensured pop-up drain assembly operates correctly with no leaks detected.
Responded to service call for air conditioning system with non-operational outdoor fan unit. Upon arrival, assessed 2015 AC system with evaporator coil located in basement and outdoor condensing unit mounted at exterior of residence. Conducted diagnostic evaluation to determine cause of fan failure while compressor continued to run. Inspected electrical connections at outdoor unit, noting weathered and rust-compromised meter enclosure and associated conduit requiring attention for proper system operation. Evaluated thermostat functionality and control wiring to rule out low-voltage control issues. Documented existing equipment condition including copper refrigerant line set routing from basement coil location to outdoor unit. Prepared comprehensive replacement estimate for customer consideration given age and condition of existing system components. Photographed current installation including thermostat location, exterior electrical service connections, and outdoor unit positioning for
Completed Gold AC Inspection on a 4-year-old Bryant air conditioning system with the air handler located in the basement. Performed comprehensive inspection of the outdoor condenser unit, which was found to be in functional condition with minor surface weathering consistent with normal outdoor exposure. Verified system operation, inspected electrical connections, checked refrigerant lines, and documented equipment condition with photos for maintenance records.
Completed comprehensive Gold AC inspection on 3-year-old Lennox split system with basement air handler and exterior condenser unit. Performed full system evaluation including visual inspection of outdoor condenser unit positioned on concrete pad, verified proper clearances and debris-free surroundings, assessed refrigerant lines and electrical connections, and inspected basement air handler with evaporator coil assembly. Confirmed system operational status, examined insulation integrity in attic space, and verified all components functioning within manufacturer specifications under suitable weather conditions for accurate performance assessment.
Responded to a water leak originating from bathroom sink plumbing that was penetrating through the floor into the basement below. Upon inspection, identified the source as failed connections in the drain assembly beneath the vanity. Disassembled the PVC trap and drain piping, replaced deteriorated washers and gaskets at the threaded connections, and reassembled the system with proper sealing compound. Verified supply line connections were secure and free from leaks. Tested all fixtures under full water pressure and confirmed complete resolution of the leak with no further water penetration to the lower level. Protected sink basin during repair work and left all plumbing in proper working order.
Completed comprehensive Gold AC inspection on 10+ year old residential air conditioning system. Inspected outdoor condenser unit, confirmed proper operation of compressor and fan motor, examined heat exchanger coils showing normal age-related weathering, and verified refrigerant lines and connections at exterior unit. Equipment is functioning properly with no immediate service needs identified; documented system condition with photos for maintenance records.
Responded to callback for less than one-year-old AC system producing warm air after briefly operating correctly following initial service visit. Performed system diagnostics and vacuum testing on outdoor condensing unit using calibrated vacuum gauge to verify refrigerant circuit integrity and proper evacuation levels. System showed vacuum reading of -22 microns, indicating potential leak or insufficient refrigerant charge causing inadequate cooling performance and warm air discharge at indoor unit.
Completed HVAC estimate for cooling system replacement at residential property with small square footage (0-1500 sq ft). Assessed existing outdoor condenser unit located in side yard landscaped area and basement unit configuration. Documented current system condition including weathered condenser with cylindrical design, PVC condensate drain lines, electrical conduit routing, and equipment positioning between brick wall and exterior siding for replacement quote preparation.
Completed comprehensive Gold AC inspection on a 5-year-old residential air conditioning system with air handler located in basement. Performed full system evaluation including condenser unit inspection, verified proper operation of all components, checked refrigerant levels, tested electrical connections, inspected condensate drainage system, and evaluated overall equipment performance. Unit found to be operating within normal parameters with condenser positioned in side yard on proper mounting pad with adequate clearance for airflow and service access.
Completed installation of new bathroom sink faucet assembly with modern single-lever pull-out design in brushed nickel finish, including mounting plate and drain hardware. Replaced deteriorating P-trap assembly beneath sink due to visible corrosion and evidence of previous water leakage, installing new white plastic trap with proper sealing connections. Connected chrome braided supply line to ensure proper water flow to new faucet fixture.
# Outdoor Spigot Replacement and Code Compliance Upgrade Responded to service request for replacement of two exterior hose bibs requiring code compliance updates at front and rear yard locations. Upon arrival, assessed existing outdoor plumbing installations mounted on building exterior against brick and horizontal siding. ## Work Performed **Front Yard Spigot Assembly:** Removed existing weathered outdoor faucet system showing significant corrosion and aging. Existing configuration included deteriorated copper piping with blue-green patina buildup and heavily oxidized brass valve components with brown rust accumulation. Disconnected obsolete plumbing assembly including corroded galvanized fittings and compromised connection points. Installed new code-compliant frost-proof sillcock with proper pitch for drainage. Configured new copper supply line connections with lead-free solder joints. Integrated backflow prevention device per current plumbing code requirements. Secured all pipi
Responded to callback for gas water heater experiencing repeated thermal limit switch trips and loss of hot water. Removed burner assembly and thoroughly cleaned intake system to eliminate blockage causing improper combustion and overheating conditions. Inspected blower wheel and housing, verified proper airflow, and tested all safety controls for correct operation before returning unit to service.
Responded to no cooling complaint on 14-year-old residential air conditioning system. Upon arrival, performed diagnostic testing on both indoor blower motor assembly located in basement and outdoor condensing unit. Utilized digital clamp meter to measure electrical draw and verify proper voltage supply to compressor and condenser fan motor. Inspected blower motor electrical connections and terminals, confirming wire integrity and secure connections at motor capacitor. Evaluated outdoor unit for proper operation, checking refrigerant pressures and amperage draw on compressor. System restored to normal cooling operation following diagnostic procedures and minor adjustments to electrical connections.
Completed installation of a 40-gallon standard capacity tanked water heater in the mechanical utility space. Positioned unit on existing white concrete platform with drip pan for secondary containment and leak protection. Reconnected all necessary plumbing lines, installed pressure relief valve with proper discharge piping, and verified all connections for code compliance. Ensured proper venting through black exhaust pipe and confirmed all manufacturer specifications were met. All water supply connections were secured and tested for leaks. Unit is fully operational and ready for service.
Completed installation of a new three-piece widespread bathroom faucet in brushed gold/bronze finish with matching drain assembly. Also installed an exterior hose bib with proper shutoff valve. All supply lines were connected with braided stainless steel hoses, P-trap was properly assembled with compression fittings, and all connections were tested for leaks to ensure proper operation.
Responded to service call for heating system maintenance. Removed burner assembly from furnace unit and performed thorough cleaning of intake components to remove accumulated debris and ensure proper airflow. Blew out intake passages to restore optimal combustion air supply. Inspected gas valve assembly and associated piping connections in mechanical closet. Verified all safety labels and compliance stickers present on equipment panel. Reinstalled burner assembly and confirmed proper operation of heating system upon completion.
