Troy Service Overview
● Local Priority: Dedicated service for Troy neighborhoods and commercial corridors.
● Certified Expertise: Expert HVAC, electrical, and plumbing diagnostics and repair.
● Efficiency Focus: Maximizing home comfort and system longevity in aging homes.
Troy sits along I-75 and Big Beaver Road, with major corridors like Livernois, Rochester Road, and Coolidge running through one of Oakland County’s busiest residential and commercial areas. With more than 35,000 homes, many built around the 1970s, FLAME Heating, Cooling, Plumbing & Electrical handles a high volume of maintenance, upgrades, and system replacements across Troy every week.
We are in Troy homes daily, working in the same subdivisions and layouts again and again, which allows us to diagnose issues quickly and get them fixed the right way. If your system is not performing the way it should, call (888) 234-2340 now and get it checked before it turns into a larger and more expensive problem.
What Makes Troy Homes Different
Troy sits in a different category than many surrounding cities. Homes here are not dealing with the same level of wear you see in older areas, but they are also not new builds. Most systems have already been replaced once, sometimes twice, and are now reaching the stage where performance issues begin to show.
From homes near the Somerset Collection and the Big Beaver corridor to subdivisions near Beaver Trail and residential pockets off Rochester Road, we see consistent patterns. Airflow is often slightly off, systems are not always sized correctly for the home, and maintenance has not always kept up with demand. These are not emergency failures at first. They are slow performance declines that eventually lead to bigger issues if ignored.
“My mother had a furnace maintenance done and couldn’t be happier with the service. Michael was very knowledgeable and took the time to explain everything clearly and calmly. The inspection was thorough, and the furnace was left running efficiently.”
Expert Electrical Services in Troy
Electrical in Troy, MI
Electrical demand in Troy homes has increased significantly over the last decade. Homes that were originally designed for basic usage are now supporting high-efficiency HVAC systems, smart home devices, EV chargers, and additional appliances.
We regularly open panels in Troy homes and find they are close to capacity or outdated for current demand. This is especially common in homes built in the 1970s where the original panel has not been upgraded.
● Lighting
● Circuit breakers and electrical panels
● Smart home wiring and automation
Homes near Rochester Road and older subdivisions often have limited panel space and undersized wiring for modern usage. If breakers trip, lights dim, or you are planning to add new equipment, it is time to evaluate the system.
Need electrical work handled correctly the first time? Call (888) 234-2340 and we will get a technician out quickly.
Cooling in Troy, MI
Cooling your home in Troy through a humid Michigan summer requires a system that is properly sized and running at peak efficiency. With many homes in the area built in the 1970s and 1980s, we frequently see air conditioning units that have reached the end of their lifespan and are struggling to keep up with the demand.
Whether you live near the Somerset Collection or closer to the Stage Nature Center, common cooling issues in Troy include uneven temperatures between floors, weak airflow, and rising energy bills. These are often signs of aging equipment or ductwork that needs attention.
● Air conditioning repair and maintenance
● AC system replacement and installation
● Thermostat upgrades and smart home integration
● Indoor air quality solutions
If your AC is constantly running but your home still feels warm, do not wait for a complete breakdown. Call (888) 234-2340 to get a FLAME technician out to diagnose the issue correctly.
Heating in Troy, MI
Heating systems in Troy homes are typically in the mid-life stage. They still operate, but efficiency drops and performance becomes less consistent. This often shows up as uneven heating, longer run times, or higher utility bills.
We frequently see this in homes built around the 1970s where duct systems were not designed for modern efficiency standards. Returns are often undersized, which affects airflow throughout the home.
● Furnace repair and replacement
● Heat pump installation and repair
● System efficiency improvements
If your furnace runs constantly or struggles to maintain temperature, the issue is usually tied to system design or airflow, not just the equipment itself.
“Jeff Andrew’s, plumber from Flame Heating, was excellent. He handled a full laundry relocation and replaced outdated plumbing in the basement. He coordinated everything and followed through at every stage.”
Common Troy Household Challenges
Problem: Aging systems in 1970s Troy homes often suffer from undersized ductwork and outdated electrical panels, leading to poor airflow and insufficient power for modern smart appliances.
Solution: FLAME provides comprehensive diagnostics to optimize airflow, correctly size HVAC replacements, and upgrade electrical panels to safely handle today’s home energy demands.
Plumbing in Troy, MI
Plumbing systems in Troy are generally newer than in surrounding cities, but they still develop issues over time. Buildup in drain lines, worn fixtures, and aging water heaters are common as systems move past mid-life.
We often work in homes with finished basements or updated layouts where plumbing has been modified. These changes can create pressure inconsistencies or drainage issues if not done correctly.
● Burst and frozen pipe repair
Sump pumps are especially important in Troy due to finished basements. Even a small failure can lead to costly water damage. Regular checks and maintenance go a long way in preventing that.
“We have always had good experiences with FLAME technicians. They are respectful and professional. We had our central air and furnace replaced by them and everything has worked perfectly.”
Why Troy Homeowners Choose FLAME
Troy homeowners expect consistency, professionalism, and results. They are not looking for quick fixes. They want systems that run properly and reliably.
● Serving the area since 1949
● Working in Troy homes daily
● Same-day service available in most neighborhoods
● Clean, professional installations
● Technicians familiar with local home layouts
● Full-service support across HVAC, plumbing, and electrical
From the Somerset Collection area to neighborhoods near Stage Nature Center and throughout the Big Beaver corridor, we are already working in your area and understand the systems in these homes.
Schedule Service in Troy Today
If you are in Troy and something does not feel right with your system, it is better to address it now than wait for a breakdown. Small performance issues tend to turn into larger repairs if ignored. We can evaluate your system, explain what is happening, and give you clear options based on your home and your setup. Call (888) 234-2340 or schedule online today. Same-day appointments are available across most of Troy, and we are already working in neighborhoods near you.
Troy Home Services FAQ
Do you provide same-day HVAC service in Troy?
Yes, we offer same-day service appointments in most Troy neighborhoods for urgent heating and cooling repairs.
Can you upgrade my electrical panel?
Absolutely. Many homes in Troy built in the 1970s require panel upgrades to support modern smart home devices, EV chargers, and high-efficiency HVAC systems. We handle full panel replacements and rewiring.
Do you service and replace sump pumps?
Yes. Because many Troy homes have finished basements, a reliable sump pump is essential. We offer sump pump repair, replacement, and regular maintenance to prevent costly water damage.
Why is my 1970s Troy home experiencing uneven heating and cooling?
Many homes built during this era feature original ductwork designs that were not optimized for today’s high-efficiency systems. Undersized return vents and aging duct layouts often restrict airflow, causing hot and cold spots. A professional duct and airflow evaluation can identify exactly where modifications are needed.
How can I improve the indoor air quality of my Troy home?
Since modern homes are sealed tightly for energy efficiency, indoor air can trap allergens, dust, and humidity. We offer comprehensive indoor air quality solutions, including whole-home humidifiers, air purifiers, and UV light systems that integrate directly into your existing HVAC ductwork.
Recent Jobs and Reviews in Troy , MI
Job Locations and Reviews
Completed comprehensive tune-up and maintenance service on 12-year-old Bryant AC and furnace system. Performed detailed inspection of outdoor condensing unit with access panel removal, verified electrical connections including capacitor and contactor functionality, tested refrigerant pressures using manifold gauges to ensure proper system charge, and inspected copper refrigerant lines for integrity. All components found operating within normal parameters, system tested and confirmed working properly upon completion.
Responded to no heat call on 7-year-old furnace located in basement. Upon arrival, verified thermostat was calling for heat but furnace failed to ignite. Performed diagnostic inspection of heating system and identified issue preventing furnace operation when switching from cooling to heating mode.
Responded to service call for Bryant 16KW whole home generator not cycling properly. Performed diagnostic inspection of unit installed in attic space. Inspected engine components, control panel, electrical connections, and transfer switch operation. Verified proper fuel supply, battery voltage, and control board functionality. Tested automatic transfer switch cycling sequence and confirmed system returned to normal operation. Unit now cycling correctly through all operational modes.
Completed comprehensive Gold AC Inspection on residential split system with outdoor condenser unit and basement air handler. Performed thorough evaluation of system components including Nest thermostat functionality set at 69 degrees, outdoor condenser unit with visible fan operation and intact grille fins, electrical connections at wall-mounted junction boxes, and associated conduit and drainage lines. All accessible components inspected per Gold maintenance protocol standards with system operating within normal parameters at time of inspection.
Completed comprehensive Gold AC Inspection and tune-up on outdoor condensing unit in preparation for summer season. Performed full system evaluation including condenser coil cleaning, refrigerant level check, electrical component testing, and fan motor operation verification. Unit showed normal wear consistent with outdoor installation; cleaned debris from exterior grille and surrounding area, confirmed proper airflow through condenser fan assembly, and verified all controls in basement location functioning correctly for optimal cooling performance.
Completed annual maintenance on an 11kW Generac Evolution generator with 23,543 run hours. Verified operational status, inspected control panel functionality including display and navigation buttons, and processed maintenance plan renewal for continued coverage.
Responded to an active water leak in the basement of a 50-year-old residential property. Upon arrival, located the source of the dripping leak on the main water supply line near the utility corner. The affected area showed evidence of prolonged moisture exposure, with visible mold growth on surrounding walls and water damage to concrete flooring. Shut off the main water supply using the existing gate valve to stop the active leak. Assessed the brass piping system and identified a compromised section requiring immediate attention. Due to the age of the home and existing plumbing infrastructure, recommended monitoring additional sections of the supply line for potential weak points. The basement was undergoing renovation with materials and equipment present throughout the work area. A collection bucket had been placed beneath the leak point prior to arrival to minimize water damage. Addressed the immediate leak concern to prevent further moisture intrusion and potential exacerbation
Responded to no heat call on four-month-old furnace system. Upon inspection, discovered loose wire connection at blower motor terminal block. Reconnected and secured all electrical connections, verified proper motor operation, and tested system through full heating cycle. Unit restored to normal operation with heat confirmed at registers.
Completed comprehensive Gold AC inspection on a 1-year-old residential air conditioning system with air handler located in basement. Performed thorough visual inspection of indoor air handler components including blower motor assembly, electrical connections, wire harnesses, control modules, and refrigerant lines. Inspected outdoor condensing unit including fan assembly with radial blade configuration, verified proper operation of all mechanical components, and confirmed unit exterior condition. System found to be operating properly with all components functioning as designed and no service issues identified.
Conducted on-site evaluation for complete HVAC system replacement including furnace and air conditioning unit. Assessed existing natural gas furnace located in basement closet and air conditioning condenser positioned in backyard, both units significantly aged and nearing end of service life. Documented current system configuration, ductwork routing through attic space with fiberglass insulation between joists, and existing utility infrastructure including water heater proximity to furnace location. Verified furnace currently operational while air conditioner remained untested for current season. Photographed installation areas, structural access points, and existing mechanical room layout to develop comprehensive replacement proposal for new high-efficiency heating and cooling equipment.
Responded to no heat call on 2017 Bryant furnace where blower was running but unit failed to produce heat following recent service. Diagnosed failed ignition system preventing burner assembly from lighting. Replaced faulty ignitor and verified proper flame sensor operation, restoring full heating function to unit.
Responded to a one-year ongoing water leak at an exterior hose bib on a 40-year-old residential property. Upon inspection, identified the outdoor faucet mounted at foundation level on the brick exterior wall was the source of the leak. Repaired the faulty hose bib to restore proper function and eliminate water waste, with photographic documentation of the completed work showing the spigot installed in the landscaped area with decorative rock bedding.
Completed full HVAC system installation including a 70,000 BTU furnace, 2-ton air conditioning unit positioned on left side, Ecobee smart thermostat, and humidifier reconnection. Obtained mechanical, plumbing, and electrical permits prior to installation. Performed system startup, verified proper operation using diagnostic equipment, and confirmed AHRI matching certification. Customer retained existing equipment for personal disposal.
Responded to callback regarding floor drain backup and water accumulation in basement following previous floor break repair performed on 3/3. Conducted camera inspection of main drain system to assess drainage conditions and verify integrity of prior repair work. Inspection revealed standing water in drain line and backup at floor drain location. Documented interior basement conditions showing water pooling around floor drain opening with visible corrosion at drain rim and moisture present on surrounding floor surface. Black drain pipe connections and fittings were inspected for proper installation and potential failure points. Exterior inspection conducted to assess yard grade and potential surface water infiltration issues that may be contributing to basement drainage problems.
Responded to complaint of noisy air conditioning unit during start-up on approximately 1-year-old system. Performed diagnostic inspection of outdoor condensing unit and indoor evaporator coil located in basement. Identified and addressed noise issue related to refrigerant line vibration and secured loose components at exterior unit connections. System tested through complete cooling cycle and verified quiet operation with proper start-up sequence.
Responded to service call for multiple plumbing issues including kitchen sink leak, basement faucet replacement needs, and reduced shower pressure. Performed diagnostic inspection of kitchen sink plumbing system, identifying leak source at drain assembly and P-trap connections beneath double-basin stainless steel sink. Inspected under-sink plumbing configuration including PVC drain lines, compression fittings, and shut-off valves to assess leak points and determine necessary repairs for proper drainage function.
Completed annual gold-level air conditioning safety inspection and preventative maintenance on outdoor condensing unit installed approximately 4-5 years ago. Performed comprehensive system evaluation including visual inspection of housing and components, verified fan operation and top grille assembly integrity, checked unit positioning and concrete pad stability, and documented equipment condition with photographic records. All components found in satisfactory operational condition with no immediate service needs identified.
Installed a 40-gallon Bradford White natural draft atmospheric vent water heater (model RG240T6N) in basement utility area. Connected natural gas supply line, installed copper water piping connections, and configured proper venting system with dark metal vent pipes. Added required drain pan beneath unit to protect against potential water damage and ensure code compliance.
Installed new stainless steel dishwasher in residential kitchen between existing white cabinetry. Unit was properly leveled, secured to countertop, and connected to water supply and drain lines with all connections tested for leaks and proper operation.
Completed installation of customer-supplied Moen kitchen faucet in main floor kitchen of 35-year-old home. Removed existing chrome faucet and installed new stainless steel faucet with tall spout and side spray attachment. Connected supply lines to existing shut-off valves under sink, verified proper water flow and pressure, and tested for leaks. All connections secure and functioning properly upon completion.
Troy Local Services
Troy Heating Services
Troy Air Conditioning Services
Troy Plumbing Services
Troy Electrical Services
Troy Indoor Air Quality
