Heating and Cooling Clinton Township

Completed comprehensive Gold AC inspection on 2019 residential air conditioning system with air handler located in basement and condenser unit positioned on exterior concrete pad. Performed thorough multi-point inspection including evaluation of outdoor condenser unit with operational fan motor and protective wire guard, verified proper placement and clearance around unit, assessed condensate drain line routing, and documented equipment condition through photographic records. System found to be in proper working order with no immediate service requirements identified.

Completed diagnostic evaluation and provided replacement estimate for aging R22 air conditioning system experiencing inadequate airflow and insufficient cooling capacity. Assessed existing unit located in interior utility closet near bathroom, documented electrical panel configuration and current HVAC installation within louvered cabinet enclosure. Recommended full system replacement due to obsolete refrigerant type and equipment age affecting performance.

Completed comprehensive Gold AC inspection on 12-year-old air conditioning system with basement-located air handler and coil. Performed thorough examination of outdoor condenser unit including fan assembly, blade condition, and housing integrity; noted normal weathering consistent with outdoor exposure and minor debris accumulation around unit perimeter. All equipment confirmed operational prior to inspection, with system components functioning within normal parameters for unit age.

Performed air conditioning system startup on Lennox outdoor condensing unit. Contacted customer 30 minutes prior to arrival as requested, then completed full system commissioning including temperature verification readings and operational testing to confirm proper system performance.

Completed comprehensive AC tune-up and inspection on 20-year-old outdoor condensing unit. Performed standard maintenance protocol including system performance evaluation, electrical testing, refrigerant level assessment, and condenser coil inspection. Noted vegetation encroachment requiring clearance and debris accumulation around unit base that may restrict airflow; customer advised of recommended clearance maintenance for optimal system efficiency and longevity.

Completed on-site assessment for Magic Pack heating and cooling unit replacement in owner-occupied apartment with balcony-mounted equipment of unknown age. Documented existing HVAC system configuration, including interior utility space connections, ductwork layout, water heater proximity, gas line routing, and electrical panel location. Provided comprehensive replacement quote based on current equipment condition and installation requirements.

Completed Gold Furnace Inspection on 20+ year old outdoor furnace unit located behind condo. Performed comprehensive system evaluation including burner operation check, electrical connections inspection, and blower motor assessment. Verified proper ignition with burners displaying characteristic blue flame pattern indicating efficient combustion. Inspected control module wiring, blower assembly, and all electrical components. System operational at time of inspection. Documentation photos captured for service records.

Responded to water leak complaint originating from a recently completed installation. Upon inspection, identified active leak at T-union connection in copper piping located in ceiling space. Accessed mechanical chase and attic area to assess copper plumbing lines and verify source of water intrusion. Documented existing conditions including copper pipe routing, insulation placement, and surrounding mechanical systems. Coordinated with installation team to review original connection methods and determine corrective action required for proper seal at union fitting.

Responded to service call for 2005 furnace experiencing fan operation without heat production and chronic overheating issues due to oversized equipment. Performed diagnostic evaluation of basement-installed furnace system, assessed ductwork configuration and equipment sizing relative to heating load requirements. Documented existing system conditions including furnace cabinet, supply plenum measurements, and overall installation setup. Provided comprehensive replacement estimate addressing proper equipment sizing to eliminate overheating cycles and restore reliable heating operation to the residence.

Completed preventive maintenance tune-up on 2-year-old HVAC system located in basement utility area. Performed comprehensive system inspection of air handler unit, verified proper operation of all components, checked ductwork connections, and confirmed system is functioning within manufacturer specifications.

Completed installation of 18kW standby generator system including all mechanical, electrical, and gas piping components. Installed automatic transfer switch in basement utility area with proper circuit breaker integration to existing electrical panel. Ran black gas piping along exterior brick wall from natural gas meter to generator location, performed pressure testing to verify system integrity, and coordinated permit requirements for the complete installation.

Responded to service call regarding damaged gas line to dryer allegedly caused by previous installation work. Upon inspection of mechanical room and utility space, documented existing gas piping configuration, water heater installation, HVAC equipment placement, and associated utility connections. Photographed current conditions showing vertical gas piping runs, PVC plumbing lines, and flexible ductwork in confined utility area to establish baseline assessment of reported issue.

Responded to call back for 2005 furnace located in basement with complaint of blower running but no heat production. Upon inspection, confirmed burners were igniting properly with visible blue flames in combustion chamber, and all gas valve components appeared operational. Verified system operation, documented burner assembly condition with photos, and confirmed unit was heating as designed at time of service.

Completed comprehensive Gold AC inspection on 10+ year old residential air conditioning system with air handler located in basement. Performed full system evaluation including outdoor condenser unit examination, electrical component inspection, and refrigerant line assessment. Inspected condenser pad showing signs of age with weathering, algae growth, and concrete cracking; noted accumulation of fallen leaves and debris around unit perimeter. Examined internal electrical components, capacitor, wiring connections, and control panel for proper operation and safety. Documented system condition through photographic inspection of both exterior condenser unit and interior electrical components. Unit confirmed operational at time of inspection with all components functioning within normal parameters for equipment age.

Responded to service call for reported gas odor at furnace location. Gas utility had previously identified a small gas leak at a coupling above the furnace unit. Inspected gas piping connections, located the leaking coupling joint, shut off gas supply, and tightened the faulty connection. Performed leak detection test using soap solution to verify repair integrity, then restored gas service. Conducted operational test of furnace to confirm proper ignition sequence and burner operation. System returned to normal heating function with no further gas odor detected.

Provided comprehensive estimate for replacement of 10+ year old residential air conditioning unit. Existing system currently operational with natural gas furnace, Honeywell Enviracare Elite humidifier, and standard ductwork configuration located in basement utility area. Documented current equipment specifications including air handler, metallic supply plenum, PVC condensate drainage system, and existing humidification components to ensure accurate sizing and compatibility recommendations for new AC unit installation.

Performed AC system startup and commissioning on newly installed basement evaporator coil and furnace system. Verified proper refrigerant charge, airflow through metal plenum and ductwork, and confirmed all electrical connections to the furnace unit. Tested system operation including blower motor function, verified intake and exhaust venting through white PVC pipes, and ensured proper condensate drainage. System startup completed successfully with all components operating within manufacturer specifications.

Completed comprehensive Gold AC Inspection and tune-up on a 2-year-old residential air conditioning system located on the north side of the property. Unit is positioned on a concrete pad against brick exterior wall with proper electrical disconnect and metering in place. Performed full preventive maintenance protocol including inspection of condensing unit, fan assembly, and all electrical connections. Verified proper operation of circular fan assembly with radial metal fins, checked refrigerant levels, cleaned condenser coils, and inspected louvered vents for adequate airflow. Examined electrical components including disconnect box and conduit connections mounted on building exterior. Unit operating within normal parameters with no deficiencies noted. System is in good condition for its age with proper installation on elevated pad for drainage. Membership renewal processed to include this maintenance visit.

Completed system start-up and inspection on recently installed HVAC system with outdoor condensing unit and basement air handler. Verified proper operation of all equipment components, checked refrigerant connections and electrical disconnect, and confirmed unit placement on appropriate pad with proper clearances. Documented installation with photographs showing plumbing connections at air handler and exterior condenser positioning against building foundation.

Conducted on-site assessment for installation of new four-zone mini split system with 40,000-50,000 BTU total capacity in residential property. Evaluated interior spaces including upstairs bedroom and downstairs living areas to determine optimal placement for indoor air handler units and routing for refrigerant lines and condensate drainage. Documented existing conditions and structural considerations for two-zone downstairs and two-zone upstairs configuration, photographed installation locations, and prepared comprehensive estimate options including budget-friendly system selections for customer's first mini split installation.