Efficient Heating and Cooling Services in Farmington Hills, MI

Completed comprehensive Gold AC inspection on 9-year-old Bryant residential cooling system with air handler located in basement. Unit confirmed operational at time of service. Performed thorough visual assessment of outdoor condenser unit, which is properly installed on gravel pad against exterior brick wall with appropriate electrical disconnect box mounted nearby. Condenser cabinet, fan guard, and grilles found intact with no significant damage, showing normal weathering consistent with age. Advised customer that area surrounding condenser requires clearing of debris and any animal waste to maintain proper airflow and system efficiency. All major components including fan assembly, cabinet panels, and protective guards verified to be in good working condition. Unit demonstrates proper professional installation with adequate clearance and mounting.

Responded to no heat call on 10+ year old furnace located in closet. Performed diagnostic evaluation and inspected unit components including rating plate and burner assembly. Identified system malfunction preventing heat operation and documented equipment specifications for service records.

Completed comprehensive Gold AC inspection on a 5-year-old residential air conditioning system with air handler located in basement. Performed multi-point evaluation of outdoor condensing unit, which was found in good operational condition with no visible damage, rust, or corrosion. Verified proper fan operation, inspected housing and louvers for integrity, and confirmed unit was positioned correctly on concrete pad with adequate clearance. System operating normally at time of inspection.

Conducted on-site assessment for new whole home generator installation at manufactured home residence. Evaluated existing electrical infrastructure in basement utility area, documenting current electrical panel configuration and available conduit pathways for future generator integration. Provided detailed estimate for complete generator system installation including necessary electrical connections, transfer switch equipment, and required upgrades to support automatic backup power capabilities.

Responded to callback request to re-inspect and clean 5-year-old Bryant condensing unit and evaporator coil system. Performed thorough cleaning of outdoor condenser coil and verified proper airflow through cabinet. Accessed basement air handler, re-cleaned evaporator coil, and confirmed all components operating within manufacturer specifications with no deficiencies noted.

Completed comprehensive Gold AC Inspection on a 5-year-old Bryant air conditioning system with air handler located in basement. Performed thorough examination of outdoor condenser unit, verified proper operation of compressor and fan motor, inspected electrical connections and disconnect box, checked refrigerant levels and system pressures, cleaned condenser coils, and assessed overall system performance. Unit found in good working condition with no immediate service needs identified, all components operating within manufacturer specifications.

Completed Gold AC inspection on dual-unit residential HVAC system with 2024 equipment featuring basement-located air handler and exterior condenser unit. Performed comprehensive multi-point inspection including verification of system operation, examination of condenser unit mounted on elevated wooden platform with proper clearance, assessment of return air grille showing normal dust accumulation, and confirmation that outdoor unit maintained adequate airflow through louvered vents with top-mounted fan assembly functioning properly.

Completed comprehensive Gold-level air conditioning inspection on 10+ year old residential cooling system with basement-located air handler. Outdoor condensing unit showed signs of weathering with visible algae and mildew growth on cabinet surfaces and top panel, indicating need for cleaning and maintenance. Thoroughly evaluated condenser coils, fan operation, refrigerant levels, electrical connections, and overall system performance to ensure optimal cooling efficiency for the upcoming season.

Completed annual testing and certification of PVB (Pressure Vacuum Breaker) backflow preventer assembly mounted on exterior brick wall. Inspected backflow device with identification tag T694119, verified proper operation of vacuum breaker mechanism and brass valve assembly, confirmed all components functioning within specifications. Documented installation with photographs showing complete assembly including Zurn ball valves, copper piping configuration, and proper mounting to building exterior for compliance records.

Completed estimate for replacement of 10-year-old air conditioning system including outdoor condensing unit and indoor evaporator coil located in basement. Evaluated existing electrical panel with dedicated AC circuit breakers and assessed current outdoor unit positioned on concrete pad adjacent to home foundation. Provided comprehensive replacement quote for complete system upgrade with new equipment installation.

Completed full HVAC system installation including 90,000 BTU high-efficiency furnace, 2.5 ton air conditioning unit with rear discharge configuration, humidifier, condensate drain pan, wet switch safety device, and 600 cfm ventilation. Reconnected existing electrical service, performed system flush, and verified all components operating to manufacturer specifications. Mechanical permit obtained and installation passed inspection.

Completed air conditioning system start-up and inspection on residential split system with Lennox outdoor condensing unit and basement evaporator coil. Verified proper system operation, checked electrical connections, inspected refrigerant lines and drainage, and documented equipment condition with photographs for service records.

Performed annual backflow preventer testing on exterior irrigation system backflow device mounted on building exterior. Inspected galvanized steel piping assembly, brass valves, and pressure regulator for proper operation and compliance with cross-connection control standards. All components tested successfully and system certified for continued use.

Provided comprehensive estimate for replacement of 20+ year old air conditioning unit currently located outside the residence. Assessed existing system configuration including natural gas furnace integration, evaluated basement mechanical room infrastructure with exposed ductwork and copper piping, and documented current equipment placement and accessibility for future AC replacement installation.

Completed comprehensive Gold AC inspection on 2-year-old Daikin single-zone system with air handler located on lower level. Performed full system evaluation including condenser unit inspection, which showed proper installation on concrete pad with isolation pads, adequate clearance from structure, clear airflow through louvers, and no visible damage or deterioration. Unit operating normally with all components functioning as designed.

Responded to request for indoor air quality improvement on 10+ year old furnace located in utility closet. Performed comprehensive diagnostic evaluation of existing HVAC system and assessed current air filtration capabilities. Provided recommendations for IAQ enhancement options including upgraded filtration systems, UV air purification, and humidity control solutions to address homeowner's air quality concerns.

Installed a 50-gallon Bradford White natural gas water heater (Model RG250T6N) with 40,000 BTU/hr input rating. Connected copper supply lines and gas piping, established proper venting configuration, and verified all connections for safe operation. Customer utilized promotional discount and paid by check upon completion.

Removed newly installed humidifier from HVAC system due to inoperable water supply line that requires replacement through downstairs unit's ceiling space. Unit removal completed to address customer satisfaction concerns until water line infrastructure can be properly resolved.

Completed comprehensive assessment of 10+ year old natural gas furnace and air conditioning system located in basement for replacement estimate. Both units currently operational but customer seeking replacement due to inefficiency concerns. Evaluated existing beige furnace unit with aged ductwork, associated gas lines, and AC system including overhead duct configuration and refrigerant lines. Documented equipment condition showing visible wear, surface discoloration, and dust accumulation throughout mechanical components. Provided detailed estimates for complete furnace and AC replacement system under quotes 07678-01 and 07678-03.

Responded to water leak complaint originating from laundry sink area. Upon arrival, conducted thorough inspection of sink plumbing system and cabinet interior. Examined P-trap assembly, drain connections, and supply line configuration for signs of active leakage or moisture damage. Verified integrity of chrome drain assembly, white PVC P-trap, and all connection points. Inspected black flexible supply hoses and shut-off valves for potential leak sources. Placed collection container beneath plumbing assembly as precautionary measure. Assessed undermount sink installation and faucet connections for any contributing factors. All plumbing components were evaluated and leak source was identified and addressed to restore proper function.