Keep your Farmington Hills home’s HVAC system up and running all year round, especially during the winter. At FLAME Heating, Cooling, Plumbing & Electrical, we aim to provide you with the expert heating and cooling solutions you deserve.
If you’re looking for reliable HVAC services in Farmington Hills, schedule a service with a technician or call 586-271-8813.
Reliable Furnace Installation and Repair
A furnace provides steady heat and is a convenient option. You can also choose an electric or gas furnace, whichever suits your needs. Whether you need furnace installation or repair in Farmington Hills, Michigan, our team will handle any service with attention to detail.
Furnace Installation
We’ll work with you to determine the right furnace type for your home and will install and connect it. Our thorough installation will prepare your household for the cold winters.
Furnace Maintenance and Repair
Furnace repair in Farmington Hills, Michigan, is an important service, and our team is ready to help with any issue. Whether your system is getting old or you’re noticing strange sounds or odors, we’ll identify the problem and apply the best solution.
We also install other types of heaters, including:
- Heat pumps
- Ductless mini-splits
- Packaged units
- Boilers and combination boilers
AC Repair and Installation Services
A summer’s day outside can be great, but only if you can return to a cool home. We specialize in virtually any type of AC system, providing comprehensive services you can count on. Let the team at FLAME Heating, Cooling, Plumbing & Electrical take care of your AC needs, including:
- AC installation: Our technicians will install your AC unit so it works efficiently and effectively. From central to ductless mini-split systems, we offer expert installation, readying you for the warmer months.
- AC repair and maintenance: If your air conditioner uses more energy than usual, is noisy, or isn’t cooling your home, it might be time for a repair. Rest assured, we’ll give the unit a new lease on life with comprehensive, targeted repairs.
See Why FLAME Heating, Cooling, Plumbing & Electrical Is Different
Whether you need a heater or AC repair in Farmington Hills, Michigan, you can trust our dedication to quality. We’ve been serving the community of Farmington Hills for over 75 years and continue to deliver exceptional services. When you choose us for your heating and cooling needs, you can enjoy:
- Prompt response times: We understand the urgency of an HVAC repair or installation and start the project swiftly.
- HVAC service experts: We specialize in all things HVAC, from heating to cooling and air quality. Our technicians are expertly trained and have the skills and experience to handle all your HVAC needs.
- Full-service company: Our comprehensive services include HVAC, plumbing, and electrical services.
- Financing options: Home care for HVAC, plumbing, and electrical needs isn’t cheap. That’s why we provide financing solutions and are upfront with our pricing to ensure we’re within your budget before you use our services. We even offer extensive discounts you can take advantage of immediately.
Schedule With FLAME Today
Our licensed and insured HVAC, plumbing, and electrical technicians at FLAME Heating, Cooling, Plumbing & Electrical have proudly served the Farmington Hills area since 1949. We strive to do the best job and treat your home and office as we would our own.
Contact FLAME for HVAC, plumbing, and electrical services by calling 586-271-8813.
Recent Jobs and Reviews in Farmington Hills , MI
Farmington Hills, MI at a glance
Flame Heating, Cooling, Plumbing, Electrical has completed 18 jobs in Farmington Hills, MI between February 2026 and March 2026.
The most recent job was on March 19, 2026.
Flame Heating, Cooling, Plumbing, Electrical has completed 158 jobs in Farmington Hills, MI in the last 12 months.
Job Locations and Reviews
Returned to customer's residence to install a drip pan beneath the water heater in the basement utility room. Successfully installed the pan under the existing water heater unit, which is positioned adjacent to the HVAC system. Documented completed installation with photos showing proper placement of the drip pan for warranty purposes.
Successfully installed a new #60 expansion tank and 30psi pressure relief valve on a combo tankless water heating system. System was properly connected to the existing copper and PVC piping network, with all connections secured and pressure-tested to ensure optimal performance and safety.
Performed scheduled tune-up on customer's Rheem hot water heater (under 10 years old) located in first floor utility area. Inspected unit for proper operation, checked connections and verified no leaks in copper supply lines. Utilized hex key tool to make minor adjustments during service. System is operating within normal parameters.
Successfully installed a complete HVAC wall unit system with integrated humidifier. System installation includes proper electrical connection to the circuit breaker panel and all ductwork. Note: Plumber needs to return to replace the under-sink ball valve to 3/8" size to complete water connection to the humidifier.
Installed new 50-gallon Bradford White water heater with proper copper and PVC connections. Completed all necessary plumbing connections including pressure relief system with brass valves. Customer renewed gold plan membership with applicable discount applied to water heater.
Performed assessment of 20+ year old Bryant Plus 90i furnace with failed inducer motor located in basement. Evaluated existing HVAC setup including ductwork configuration and ventilation system with PVC exhaust piping. Provided replacement options for the aging furnace system, noting proper specifications would be required for the basement installation with consideration for the existing condensate pump and drainage configuration.
Conducted comprehensive site assessment for AC installation in a property with no existing cooling system. Inspected exterior utility connections including electrical service entrance and available mounting locations. Evaluated interior plumbing configuration with specific attention to the existing water heater vent system and identified potential AC condensate drain line connection point as marked on the utility room wall. Documented current infrastructure to determine optimal equipment placement and installation requirements for a complete HVAC system.
Responded to service call for furnace that shuts off during nighttime operation. Performed diagnostic assessment on furnace unit located in basement, which is under 10 years old. Inspected PVC exhaust venting system and evaluated overall furnace operation to identify cause of intermittent shutdown issue.
Conducted a mini-split system installation estimate for a new air conditioning system. Inspected the electrical panel to determine available capacity for the proposed unit and assessed the interior space for optimal indoor unit placement. Documented existing infrastructure with photos to develop appropriate installation plan.
Diagnosed 15-year-old thermostat displaying sensor error code, though system remained operational. Performed diagnostic testing with Fieldpiece C197, recording temperature readings of 89.4°F and 113.5°F at different test points, confirming thermostat failure. Documented condition with photos for warranty processing.
Performed comprehensive evaluation of existing HVAC system in utility closet, including inspection of aging furnace unit with attached ductwork and associated control components. Assessment included examination of installation configuration, available space constraints, and current ventilation setup to provide customer with accurate full system replacement estimate as requested for their second opinion.
Responded to callback for furnace not reaching set temperature. Upon inspection, found heat exchanger and burners operating properly with normal blue flame pattern. Verified all electrical connections were secure and functioning correctly. No issues identified with system operation at time of service.
Inspected 2021 Navien combi boiler system reporting water leak. Verified leak location at copper pipe connection point near the main unit. Tightened braided stainless steel connection and checked all valves (red/blue handle shutoffs) for proper operation. System now functioning without leaks; recommended annual maintenance to prevent future issues.
Responded to service call for one-year-old furnace with flashing red light that was still producing heat. Diagnostic testing with multimeter revealed condensation buildup on ductwork and minor electrical issues (0.16/2.1 readings). Inspected system components and resolved the warning indicator while confirming proper system operation.
Successfully completed replacement of a failing sump pump system in basement utility area. Removed old unit showing significant mineral buildup, corrosion, and standing water with sediment. Installed new sump pump with proper electrical connections and verified system operation through the existing PVC discharge line.
Completed installation of a new faucet in customer's bathroom, requiring removal of the existing fixture and proper connection to the under-sink plumbing system. Successfully installed and secured the dark basin/sink to the wooden counter using appropriate mounting hardware, and connected the white PVC drain assembly with P-trap configuration. All connections were tested for leaks and proper drainage.
Responded to a service call regarding a water leak. Upon inspection, found ceiling damage with exposed ductwork and piping visible through an opening in the drywall. Determined the source to be a disconnected pipe near the furnace/boiler system in the utility room, which was not directly attached to the HVAC equipment. Advised customer that plumbing repairs would be necessary to resolve the issue completely.
Performed scheduled maintenance on 16 KW Generac generator. Inspected battery connections and condition of SURE START PREMIUM battery, which showed proper terminal attachment. Checked all electrical components including wiring integrity and examined the Generac system components including filter and reservoir. Unit is operational with no immediate issues identified.
