Efficient Heating and Cooling Services in Farmington Hills, MI

Responded to service call for installation quote of customer-supplied fixtures including sink faucet, dual shower heads, and shower valve assembly. Assessed existing white fiberglass shower enclosure with current chrome fixtures and evaluated mounting points for new hardware. Inspected bathroom vanity area with oval basin and existing faucet configuration to determine installation requirements for customer-provided fixtures. Documented site conditions and fixture specifications through photographs to prepare accurate installation estimate for complete fixture replacement in both shower and sink locations.

Responded to no-cooling complaint on 3-year-old minisplit system in main room. Upon inspection, identified defective flare connection on suction line causing refrigerant leak and loss of cooling capacity. System requires return visit with refrigerant flaring tool to properly repair suction side flare connection. Work covered under warranty.

Completed scheduled maintenance on a 16KW Generac residential standby generator. Performed comprehensive inspection of all generator components, verified proper operation of unit, checked oil levels and condition, inspected air filter, tested battery voltage and connections, and confirmed automatic transfer switch functionality. Unit found to be operating within normal parameters with no deficiencies noted.

Conducted on-site evaluation of existing sump pump system located in basement area. Assessed current sump pump basin installation with elevated water level and operational green submersible pump unit secured with PVC discharge piping. Inspected exterior discharge line routing, including black corrugated drainage pipe extending from foundation along white-sided structure into landscaped area with appropriate drainage away from building. Provided comprehensive estimate for sump pump system replacement or repair based on observed conditions and homeowner requirements.

Completed comprehensive Gold AC Inspection on 3-year-old residential air conditioning system. Performed full system evaluation including refrigerant charge verification, electrical component testing, condensate drain inspection, airflow measurement, and thorough cleaning of outdoor condenser unit. Inspected condenser coils, verified proper fan operation, checked all electrical connections and capacitor function, measured temperature differential across evaporator coil, and confirmed thermostat calibration. Cleared vegetation growth around outdoor unit to ensure adequate airflow clearance and prevent future efficiency loss. All components operating within manufacturer specifications with no deficiencies noted. System performing optimally with proper cooling capacity and energy efficiency maintained.

Completed Gold AC Inspection and tune-up on a three-year-old outdoor air conditioning system. Performed comprehensive maintenance including inspection of condenser unit, verified refrigerant levels, cleaned condenser coils, checked electrical connections, tested capacitor and contactor operation, confirmed proper airflow through fan assembly, and verified system cycling and temperature differential. Unit found to be operating within normal parameters with no immediate repairs required.

Responded to service call for forced central air system experiencing intermittent noise at furnace with cycling issues where unit would rev up and slow down repeatedly. Upon arrival at basement equipment location, performed diagnostic evaluation of 5-7 year old system using calibrated electronic testing equipment. Identified and resolved the operational concern causing the fluctuating fan speed and associated noise, restoring normal system operation and proper cooling function.

Conducted on-site assessment for sump pump pit installation in 47-year-old residential basement with existing sump pump system in northeast corner. Evaluated current basement conditions, including storage area configuration, HVAC ductwork placement, and foundation structure with glass block window. Inspected exterior discharge point location near foundation, noting landscaped garden bed with metal edging and proximity to deck structure. Documented existing sump pump setup, basement utility access, and potential installation parameters for new pit system. Provided comprehensive estimate for sump pump pit installation project, including assessment of workspace clearances, discharge routing options, and integration with current basement infrastructure.

Completed comprehensive Gold AC inspection on 6-year-old Daikin air conditioning system with air handler located in basement. Performed thorough evaluation of outdoor condensing unit positioned on concrete pad, verified proper operation of all components, and documented equipment condition through photographic records. System confirmed operational with no immediate service concerns identified during inspection.

Performed comprehensive air conditioning inspection on 5-year-old Daikin outdoor condenser unit and associated system components. Verified proper operation of equipment, inspected condenser unit exterior condition, examined refrigerant line connections, and assessed air handler/coil located in basement. Unit found to be functioning properly with no immediate service needs identified. Documented equipment condition with photographs for service records. Notified office regarding expired maintenance plan status requiring renewal for continued coverage.

Responded to service call for 2-month-old cooling system in basement that would not turn on. Upon arrival, accessed unit and reviewed wiring schematic to diagnose no-power condition. Identified and resolved issue, restoring full operation to the air conditioning system.

Replaced defective inducer motor assembly on furnace system. The new motor was retrieved from the shop and successfully installed, with all electrical connections properly secured to the control module and wiring harness verified for correct operation.

Responded to water leak at pressure vacuum breaker (PVB) assembly on east side of residential property. Upon arrival, identified active leak at female brass union connection between PVB and main water supply line, which began when water was restored that morning. Inspected corroded plumbing assembly mounted on exterior brick wall, noting significant rust and deterioration on metal components and water staining on surrounding masonry. Repaired faulty connection at brass union fitting to eliminate leak and restore proper seal. Verified system integrity and confirmed leak was isolated to this connection point with no impact to interior plumbing. Tested water flow after repair to ensure proper operation of PVB and supply line without further leakage.

Completed comprehensive Gold AC Inspection on a 13-year-old residential air conditioning system with basement-located air handler. Performed full system evaluation including inspection of outdoor condenser unit, indoor air handler, refrigerant lines, electrical connections, and condensate drainage. System found to be operational with no immediate service requirements identified during inspection.

Responded to persistent "dancing pipes" noise complaint in 1967-built home, occurring between laundry room and half bath on main floor for four years despite previously installed water hammer arresters. Performed diagnostic assessment of plumbing system, identifying inadequate pipe strapping as the source of vibration and noise. Strategically removed minimal sections of drywall to access affected pipe runs, installed additional pipe strapping and support brackets to secure loose copper supply lines, and verified elimination of noise through multiple fixture operation tests.

Completed installation of a 3.5-ton air conditioning unit with matching evaporator coil in the rear yard location. System was professionally mounted on brick exterior, all electrical connections and refrigerant lines were properly installed and secured with appropriate conduit and cable management, and unit was successfully reconnected and tested for proper operation.

Completed installation of flexible ductwork and HVAC modifications in commercial office space, including routing and securing flex duct to ensure proper airflow distribution. Installed new Emerson thermostat with necessary wiring and programming for climate control system operation. Verified all connections, tested system functionality, and confirmed proper temperature regulation throughout the workspace.

Completed installation of a 4-ton air conditioning system with matching evaporator coil in basement mechanical room, positioned on right side of existing utility area. Unit installed per manufacturer specifications using R-454B refrigerant, with all condensate lines, refrigerant lines, and ductwork connections completed. Electrical reconnection work noted as requiring licensed electrician for final power connection, and mechanical permit has been requested for inspection compliance.

Responded to water leak above basement laundry washtub in 60-year-old residence. Conducted thorough inspection of laundry room area to identify source of leak that had been active for 1-2 days. Examined plumbing connections beneath appliances, including braided stainless steel supply lines and shutoff valves. Inspected flexible hose connections and mounting hardware for signs of failure or deterioration. Documented conditions with photographs showing underside of appliances, water supply connections, and floor surfaces. Located compromised connection point at appliance supply line. Tightened loose fitting and verified all connections were secure. Tested system for proper operation and confirmed leak was resolved with no further water discharge observed.

Conducted comprehensive evaluation of 14-year-old residential air conditioning system experiencing multiple failure indicators. Identified active refrigerant leak, severely pitted contactor showing signs of electrical arcing, and compressor exhibiting abnormal noise during startup and shutdown cycles indicating internal mechanical wear. Documented existing Lennox air handler installation in basement with associated ductwork and drainage systems. Prepared replacement estimate for complete HVAC system upgrade, noting that outdoor condenser pad area requires clearance of debris and animal waste prior to installation. Verified current system operational status and photographed equipment configuration including furnace, air handler, ductwork connections, and PVC condensate drainage lines for replacement planning purposes.