Your home is where life happens—family dinners, cozy nights in, and weekend projects. But when something goes wrong, whether it’s a cold house in the middle of winter or an unexpected plumbing issue, it throws everything off track. That’s why FLAME Heating, Cooling, Plumbing & Electrical has been serving the Detroit Metro area for over 70 years, making home repairs and maintenance hassle-free. Our team is here to get your home back to normal quickly, with reliable, straightforward service you can trust. When you need Grosse Pointe Farms home services, call the Flame team at (586) 217-2512 or schedule your next service online.
Reliable Electrical Services in Grosse Pointe Farms

Dealing with electrical issues can be frustrating and dangerous. Whether your lights keep flickering, your breakers won’t stop tripping, or you’re thinking about upgrading your entire home’s wiring, FLAME’s licensed electricians have the expertise to make sure everything is safe, efficient, and up to code. Our industry-leading Grosse Pointe Farms electrical services include:
- Rewiring & Electrical Panel Upgrades – Old wiring can pose a fire hazard. We bring homes up to modern safety standards with full rewiring and panel upgrades.
- Circuit Breaker Troubleshooting & Repairs – If your breakers trip often, there could be an underlying issue. We diagnose and fix electrical overloads.
- Lighting for Every Room – Whether you need security lighting outdoors or modern recessed lighting inside, we install and upgrade all types of lighting.
- EV Charger Installation for Your Home – Thinking about going electric? We install home EV chargers so you can charge your vehicle easily and safely.
- Backup Generators to Keep You Running – Power outages are unpredictable, but you don’t have to be caught off guard. We install and maintain whole-home generators.
- Electrical Inspections for Peace of Mind – If you’re concerned about an electrical issue, we conduct full inspections and provide expert recommendations.
Grosse Pointe Farms Plumbing Services for a Functional Home
From a leaky faucet that won’t stop dripping to a water heater that won’t heat, plumbing problems can be frustrating—and expensive if left unchecked. FLAME’s expert plumbers are ready to help, whether it’s a minor fix or a major installation, with plumbing services in Grosse Pointe Farms you can trust.
Hot Water Solutions
No one enjoys an unexpected cold shower. Whether your water heater needs a quick repair or you’re ready to upgrade to a more efficient tankless system in Grosse Pointe Farms, we ensure you have reliable hot water when you need it.
Drain Cleaning & Clog Removal
A slow drain might seem like a small issue, but it can quickly turn into a major blockage. Our professional tools and techniques clear out stubborn clogs, restoring proper water flow before bigger problems arise.
Sewer Line Inspections & Repairs
If you notice unusual odors or slow-draining sinks, your sewer line might be the culprit. We perform thorough inspections to pinpoint issues and provide fast, effective repairs to prevent costly damage.
Leak Detection & Repair
Even small leaks can lead to big problems, from water damage to mold growth. We use advanced detection methods to find and fix leaks before they escalate.
Gas Line Installation & Repair
Need a gas line installed for a new appliance, or concerned about an existing one? Our team ensures safe, code-compliant installations and repairs.
Sump Pump Services in Grosse Pointe Farms
A working sump pump is your home’s first line of defense against basement flooding. We install, repair, and maintain sump pumps to keep your home protected, rain or shine.
Kitchen & Bathroom Plumbing Upgrades
Looking to upgrade your kitchen or bathroom? Whether it’s a new sink, faucet, or garbage disposal, we handle installations and repairs with precision and care.
Grosse Pointe Farms HVAC Services for Year-Round Comfort

There’s nothing worse than waking up to a freezing house in the middle of the night or coming home to an AC that’s barely working on a sweltering day. We know how frustrating that can be, which is why our team is ready to respond quickly, diagnose the issue, and get your system running again with reliable heating and cooling services in Grosse Pointe Farms.
Heating Services
- New Furnace Installations in Grosse Pointe Farms – If your furnace is outdated or inefficient, we install high-efficiency models that keep your home warm while saving on energy costs.
- Fast & Reliable Furnace Repairs – A furnace that won’t start or isn’t heating properly needs professional attention. We diagnose and repair all types of furnace problems.
- Boiler Repairs & Installations – If your home uses a boiler for heat, we keep it running efficiently with expert maintenance and repairs.
- Heat Pumps for Efficient Comfort – Heat pumps provide both heating and cooling in one system. We install and maintain them for reliable year-round efficiency.
- Annual Tune-Ups to Prevent Problems – Regular maintenance extends the life of your heating system and helps prevent costly breakdowns.
Cooling Services
- AC Installation & System Upgrades – A properly sized and installed air conditioning system keeps your home cool and your energy bills low.
- Quick Air Conditioner Repairs – If your AC isn’t cooling properly or is making strange noises, our technicians troubleshoot and fix the issue fast.
- Ductless Mini-Split Systems for Custom Cooling – Great for home additions or rooms without ductwork, mini-splits provide efficient, targeted cooling.
- Routine AC Maintenance – Regular tune-ups keep your system running at peak performance and prevent mid-summer breakdowns.
- Air Quality Solutions for a Healthier Home – From air purifiers to humidity control, we help you create a cleaner, healthier indoor environment.
Book Your Appointment with FLAME Today
Your home should be a place where you feel comfortable and secure, not stressed about unexpected breakdowns. Whether it’s a quick fix, routine maintenance, or a major system upgrade, FLAME Heating, Cooling, Plumbing & Electrical has you covered. Give (586) 217-2512 a call today or book your service visit online and let’s get your home back to running smoothly.
Recent Jobs and Reviews in Grosse Pointe Farms , MI
Grosse Pointe Farms, MI at a glance
Flame Heating, Cooling, Plumbing, Electrical has completed 20 jobs in Grosse Pointe Farms, MI in July 2026.
The most recent job was on July 28, 2026.
Job Locations and Reviews
Completed comprehensive Gold AC Inspection on a 10-year-old Lennox air conditioning system with outdoor condensing unit located in basement area. Performed thorough examination of condensing unit, noting significant weathering, dirt accumulation, and organic growth on exterior casing and components. Inspected fan assembly with protective wire guard, verified electrical disconnect box mounting and connections, examined refrigerant line connections, and assessed overall unit operation. Documented unit condition showing age-related wear consistent with outdoor exposure, including surface deterioration and debris accumulation around base. All major components inspected and system operational status verified per Gold maintenance protocol specifications.
Completed scheduled maintenance on a 22kW Generac standby generator at residential property. Performed standard maintenance procedures including inspection of all mechanical components, fluid levels check, battery condition assessment, and operational testing to ensure unit functionality. Unit was found in proper working condition with all systems operating within manufacturer specifications.
Provided comprehensive estimate for complete HVAC system replacement in basement installation, including non-operational 14-year-old air conditioning unit and natural gas furnace. Assessed existing American Standard equipment configuration, evaluated current ductwork, PVC condensate drainage system, copper refrigerant lines, and electrical connections. Documented equipment specifications and prepared replacement recommendations for both cooling and heating components to restore full system functionality.
Completed Gold AC Inspection on main cooling unit at residential property with three HVAC systems. Performed comprehensive diagnostic evaluation of outdoor condenser unit and associated components per Gold service protocol. Equipment operational at time of inspection, with air handler and coil assembly located in basement. All primary system components inspected and photographed for service documentation, including condenser unit with functional fan assembly and proper coil configuration. Return visit scheduled for additional diagnostic work on main unit as needed.
Responded to no cooling complaint on 1-year-old Lennox system located in basement. Upon arrival, found frozen evaporator coil at air handler and thermostat displaying Alarm ID 200 "G+ Position Circuit Fault" error. Inspected system and determined damper position sensor malfunction was causing improper airflow control, contributing to coil freeze-up. Allowed coil to thaw completely, verified condensate drainage was functioning properly, and cleared fault code from thermostat interface. Tested damper operation and confirmed proper movement throughout full range. Cycled system through complete cooling cycle to verify proper operation, adequate airflow, and appropriate temperature differential across coil. System restored to normal cooling operation with no further fault codes present.
Responded to customer complaint of loud vibrating noise occurring when air conditioning unit cycles off. Upon inspection of the three-year-old basement AC system, performed diagnostic evaluation of the blower motor assembly and associated components. System was found to be cooling adequately despite the noise concern. Inspected furnace unit, ductwork connections, and electrical components for loose mounting hardware or mechanical issues that could cause vibration during compressor shutdown. Documented equipment condition with photographs showing HVAC unit installation, blower motor assembly, and surrounding mechanical components. Advised customer of findings and provided recommendations for addressing the vibration issue during the shutdown cycle.
Completed installation of decorative vessel sink basin in bathroom with coordinating wall-mounted faucet assembly. Installed round bowl-style vessel sink with scalloped rim design onto existing white marble countertop with gray veining. Mounted three-piece wall-mounted faucet system in oil-rubbed bronze finish, consisting of two handle controls and center spout positioned above vessel basin. Connected water supply lines to wall-mounted valves and tested for proper flow and temperature control. Installed matching pop-up drain assembly with bronze finish drain cover in sink basin and verified proper drainage function. Secured all mounting hardware and sealed connections to prevent leaks. Performed final inspection to ensure all fixtures were properly aligned, fully operational, and aesthetically coordinated with existing bathroom finishes.
Completed comprehensive Gold AC inspection on 2-year-old Lennox outdoor condensing unit. System found operating normally with all components functioning within manufacturer specifications. Performed standard maintenance protocol including visual inspection of condenser coil, fan operation verification, and electrical connection assessment.
Responded to callback for re-inspection of 3-year-old air conditioning system with attic-mounted air handler and outdoor condensing unit. Performed comprehensive system evaluation addressing concerns from previous visit, including complete filter inspection and assessment of noise complaint audible from bedroom area. Verified electrical readings at air handler showing 242V and 60Hz frequency using digital multimeter. Inspected outdoor condensing unit positioned on pad with proper clearances and landscaping. Documented system condition with photos of both indoor and outdoor components. Awaiting customer response regarding consultation with Unico representative before finalizing any recommended corrective actions for noise mitigation.
Installed water-powered backup sump pump system in basement utility area. Connected unit to existing plumbing infrastructure using PVC and copper piping with appropriate valves and fittings to ensure automatic activation during primary pump failure or power outage.
Completed comprehensive Gold AC inspection on a 3-year-old residential air conditioning system with outdoor condenser unit and basement-located air handler. All equipment operating properly at time of service, with condenser positioned on gravel pad with protective wire guard in place and refrigerant lines secured along exterior. Performed full system evaluation including electrical connections, refrigerant levels, and component functionality per Gold maintenance protocol.
Responded to no cooling complaint on 5-year-old air conditioning system located on second floor. Performed diagnostic inspection of outdoor condensing unit, which showed no visible external damage or refrigerant line issues. Unit exterior and components appeared in good operational condition with proper line connections secured, though indoor air handler assessment would be required to complete diagnosis and restore cooling function.
Completed estimate for replacement of 5-year-old residential air conditioning system with outdoor condensing unit currently located against brick exterior wall in landscaped area. Assessed existing equipment condition, verified electrical connections and concrete pad placement, documented current installation configuration including proximity to building structure and surrounding vegetation. Provided comprehensive replacement options and specifications for new HVAC system to meet homeowner's cooling requirements.
Completed electrical estimate for new whole home generator installation at manufactured home. Assessed existing electrical panel in basement, which currently contains three circuit breakers with available capacity for generator integration. Documented electrical infrastructure and panel configuration to determine proper sizing and installation requirements for whole home generator system.
Completed comprehensive Gold AC inspection on three-unit residential HVAC system with 2-year-old equipment. Inspected Lennox outdoor condenser units positioned on proper mounting pads with adequate clearance, verified fan assemblies and protective guards were intact and operational, and confirmed all equipment was functioning properly. Documented system condition with photography showing units in good operational status with normal weathering appropriate for outdoor installation.
Returned to complete previously scheduled work by installing APCO air purification system and replacing air filter with correct size. APCO unit had been picked up from shop and was successfully installed into the existing HVAC system ductwork. Verified proper fit of replacement filter and confirmed system operation upon completion.
Completed repair of HVAC zoning system by replacing defective zone damper in basement air conditioning system. Installed new zone damper in ductwork and verified proper operation of HZ322 zone control panel with all three zones functioning correctly. System tested and confirmed operational with all zone indicators illuminated and damper responding appropriately to zone calls.
Responded to a violation notice regarding bonded hot water heater installation. Upon arrival, inspected exposed plumbing infrastructure within wall cavity and basement utility area. Documented existing plumbing configuration including white PVC drainage assembly with multiple elbows and joints running vertically through framing, copper supply lines with chrome shut-off valves, and galvanized steel piping. Verified sump pump basin installation with associated PVC discharge piping system. Photographed all plumbing connections, valve locations, and mechanical chase conditions for compliance documentation and warranty record purposes.
Completed comprehensive Gold plan AC maintenance inspection on a 5-year-old outdoor air conditioning system. Performed full system diagnostics using digital manifold gauges to verify refrigerant pressures, superheat, and subcooling values. Conducted visual inspection of condenser unit, confirmed proper operation of compressor and condenser fan motor, checked electrical connections, and verified system efficiency rating of 13.0 SEER as indicated on unit specifications. All components operating within normal parameters with no issues identified. System is in good working condition and ready for continued service.
Responded to no cooling complaint affecting multiple upstairs zones while downstairs and one upstairs room maintained proper cooling. Performed system diagnostics on 3-year-old air conditioning unit located outside. Measured supply air temperature at affected zone register reading 48.8°F, confirming inadequate airflow or ductwork balancing issue rather than refrigeration system failure. Inspected upstairs distribution system including registers and ductwork accessibility. Identified airflow restriction or damper positioning affecting bathroom, hallway, and bedroom zones while leaving other areas unaffected. Documented temperature readings and system conditions with photographic evidence for reference.