Efficient Heating and Cooling Services in Grosse Pointe, MI

Completed warranty repair on corroded boiler piping system, replacing heavily deteriorated threaded pipe fittings that exhibited extensive oxidation and green patina buildup. Performed AC start-up procedures and serviced basement evaporator coil to ensure proper system operation for the upcoming cooling season.

Performed comprehensive tune-up on five-year-old outdoor air conditioning system. Upon arrival, found condenser unit with significant debris accumulation on top grille, including dried leaves, plant material, and organic growth concentrated around protective cage edges and between grille bars. Removed all debris from top grille and fan assembly, cleaned condenser coils and exterior housing, inspected fan blades and motor assembly for proper operation, and verified all ventilation pathways were clear of obstructions. Unit showed normal weathering consistent with age and outdoor exposure. Completed standard maintenance procedures including checking refrigerant levels, testing electrical connections, inspecting capacitor and contactor, measuring amperage draw, and verifying proper airflow through condenser coils. System operational and running within manufacturer specifications upon completion.

Completed estimate for furnace replacement at residential property. Existing outdoor HVAC condenser unit shows significant weathering, corrosion on fan grille, and debris accumulation, positioned on concrete pad against privacy fence in narrow side yard access area. Assessed electrical panel configuration with 225A main breaker to verify compatibility for new furnace installation. Previous furnace unit was originally installed by another contractor, with current maintenance contract extending through 2026. Documented existing equipment condition and electrical infrastructure via photographs for replacement proposal. Replacement unit will be installed at same side-of-house location as existing furnace.

Completed comprehensive spring tune-up on outdoor air conditioning condenser unit positioned against building exterior. Performed standard maintenance protocol including inspection of condenser coil fins, refrigerant line connections, electrical components, and fan operation. Unit found in satisfactory working condition with all systems operating within normal parameters for upcoming cooling season.

Removed and replaced existing main bathroom toilet with new Kohler ADA-compliant pressure-assist toilet in white. Completed full installation including tank assembly, seat mounting, and connection to existing floor drain and water supply line. Verified proper flush operation and seal integrity upon completion.

Completed installation of a 4-ton Lennox air conditioning system with matching evaporator coil at rear of residence. Unit was positioned on concrete pad against brick exterior wall with proper clearances maintained for service access and airflow. All mechanical and electrical connections were completed per manufacturer specifications and local code requirements, with permits requested for mechanical and electrical work. System was tested, charged, and verified operational upon completion.

Completed comprehensive Gold AC inspection on 4-year-old residential cooling system with air handler located in basement. Performed full system evaluation including outdoor condensing unit assessment, verified proper operation of fan assembly and coil condition, inspected basement-mounted Aprilaire whole-house humidifier and associated ductwork connections. All components found operating within normal parameters with no immediate service needs identified at time of inspection.

Responded to no heat call for one room in residence with 10+ year old steam boiler system located in basement. Performed diagnostic inspection of steam heating system and associated distribution piping. Examined boiler operation, steam supply lines, radiator connections, and air venting components serving affected zone. Inspected steam trap operation, checked for proper pitch on horizontal steam mains, and verified radiator valve functionality. Evaluated pressure controls, water level, and overall system operation. Identified issue preventing adequate steam delivery to single room radiator. Documented existing plumbing infrastructure including water heater installation, supply piping network with gate valves, and copper distribution lines showing normal aging patina. Explained findings to homeowner and provided recommendations for restoring proper heat distribution to affected area.

Performed AC tune-up on 2-year-old Rheem system that was not cooling properly. Completed comprehensive maintenance inspection of outdoor condenser unit, checked refrigerant levels, cleaned coils, tested electrical connections, and verified proper airflow through louvered fins and fan operation. System restored to proper working condition with all components functioning within manufacturer specifications.

Responded to emergency plumbing call for main water shut-off valve replacement. Successfully removed deteriorated existing valve and installed new brass ball valve on main water supply line near water heater, ensuring proper shut-off capability and system integrity. Tested new valve for complete water flow control, verified all connections for leaks, and confirmed proper operation of household plumbing system upon restoration of water service.

Completed comprehensive Gold Boiler Inspection on 23-year-old residential boiler system located in basement. Performed thorough visual inspection of heat exchanger, burner assembly, and all major components. Utilized multimeter to verify electrical readings at 27.69 volts and dual-port pressure gauge to measure system pressures, confirming operational parameters within acceptable range. Inspected heat exchanger tubes for signs of corrosion, cracking, or deterioration. Examined venting system and ductwork connections for proper installation and integrity. All safety controls and limit switches tested and verified functional. Unit confirmed operational at time of inspection with no immediate service requirements identified.

Performed comprehensive evaluation of 11-year-old residential HVAC system experiencing operational issues. Corrected low voltage wiring deficiency and conducted system diagnostics, revealing significant refrigerant loss in air conditioning unit. System confirmed out of warranty. Documented existing basement-installed air handler, ductwork configuration, condensate drainage system, and refrigerant line routing with detailed measurements and technical specifications for replacement estimate purposes.

Completed comprehensive Gold AC inspection on multi-unit residential HVAC system consisting of three units with two air handlers located in attic and one coil assembly in basement. Performed diagnostic testing on 9-year-old Lennox equipment using Fieldpiece instrumentation, recording system pressures, return air dry bulb at 65.7°F, return air wet bulb at 57.5°F, supply air dry bulb at 42.2°F, and supply air wet bulb at 40.9°F with R454B refrigerant. Verified outdoor condenser unit operational status, inspected fan assembly and housing, confirmed proper airflow and clearance around equipment, and documented all system parameters within acceptable operating ranges.

Completed comprehensive Gold AC Inspection on a 10-year-old residential air conditioning system with outdoor condenser unit and basement-located air handler. Performed thorough visual assessment of condenser unit, noting leaf accumulation on louvers and signs of weathering on exterior housing. Inspected refrigerant lines, electrical conduit, and utility connections running from outdoor unit to basement air handler, confirming proper installation and securing of piping. Documented equipment condition with photographs showing condenser placement, surrounding area with moss and algae growth on concrete pad, and exterior utility connections. System confirmed operational at time of inspection, with all components accessible and functioning as designed.

Completed comprehensive Gold AC inspection on Lennox air conditioning system with air handler located in basement. Unit is under 10 years old and confirmed operational at time of service. Performed standard maintenance inspection protocol including visual assessment of outdoor condensing unit mounted on concrete pad against exterior brick wall, verified electrical disconnect box functionality and proper labeling, and documented equipment condition through photographic records. Advised customer that area surrounding condenser requires clearing of debris and any animal waste to maintain proper airflow and system efficiency.

Completed comprehensive inspection and preventive maintenance on 7-year-old Amana air conditioning system and hot water tank. AC unit inspection included examining outdoor condenser positioned on concrete pad, verifying proper refrigerant line connections, checking electrical conduit and disconnect box functionality, and assessing overall equipment condition. Confirmed unit operational status with no immediate concerns noted. Performed hot water tank flush to remove sediment buildup and maintain heating efficiency. All equipment found to be in working order with appropriate weathering for age and outdoor exposure.

Completed comprehensive Gold AC inspection on 6-year-old Bryant air conditioning system. Thoroughly examined outdoor condenser unit, confirming fins are clean, straight, and free of damage, with proper airflow through coils. Verified equipment is operating correctly with air handler located in basement. Unit is properly positioned on concrete pad with adequate clearance, and surrounding area is clear of debris. All components inspected and found to be in good working condition with no immediate service needs identified.

Performed system start-up and commissioning on newly installed outdoor air conditioning condenser unit. Verified proper operation of all components, confirmed electrical connections and refrigerant lines are secure, and documented equipment installation with photos showing unit properly positioned against structure with adequate clearance for airflow through louvers and fan grille.

Performed system startup and commissioning on residential air conditioning system. Verified outdoor condenser unit operational status, confirmed proper electrical connections via conduit, and documented equipment installation on concrete pad. System tested and operating within normal parameters.

Completed AC system start-up and inspection for newly installed basement evaporator coil. Verified refrigerant line connections, electrical wiring, and condensate drain assembly. All components tested and operating within manufacturer specifications.