Heating and Cooling New Baltimore

Completed comprehensive Gold AC inspection on 4-year-old residential split system with basement-mounted furnace and evaporator coil, and outdoor condensing unit. Performed thorough visual assessment of outdoor condenser unit, confirming proper fan operation, intact protective grille, and functional electrical disconnect. Inspected indoor furnace and air handler components, noting 96 AFUE-rated unit with accessible blower motor assembly and electrical connections. Observed existing copper refrigerant line showing surface corrosion and rust patina during interior inspection. All major system components including blower motor, gas controls, wiring harnesses, and condensate drainage verified as operational. System confirmed working properly at time of inspection with homeowner present.

Responded to commercial property for multiple AC leak complaints affecting office space. Accessed rooftop unit via ladder and inspected packaged RTU condenser, identifying compromised condensate drainage system with visible water staining on roof membrane beneath unit. Examined refrigerant line insulation showing weathering and deterioration. Inspected mini split system located adjacent to property for reported leaking condition. Assessed garage thermostat malfunction. Documented equipment conditions with photographic evidence showing rooftop HVAC installation, condensate pan assembly, copper refrigerant lines with worn insulation, and roof membrane water damage patterns.

Responded to service call for utility tub emitting gassy odor in basement area. Upon inspection, identified issue with drain trap system beneath UTILATUB fixture. Customer had been using temporary tablet treatments which were no longer effective as condition worsened. Examined PVC drain assembly and connections under utility sink, checking for proper trap configuration and venting issues that could allow sewer gases to escape into living space. Assessed plumbing connections, flexible supply lines, and drain piping for potential dry trap, partial blockage, or venting deficiency causing odor penetration. Documented existing conditions of utility room plumbing system including water heater proximity and drain line configuration for service records.

Completed comprehensive Gold Plan air conditioning maintenance on a 10-year-old basement-located AC unit. Performed full system inspection including examination of outdoor condenser unit, verified proper operation of all components, and inspected refrigerant line connections which showed age-appropriate patina and weathering on brass valves and copper piping. Checked condenser coils, fan operation, and electrical connections; cleaned exterior surfaces and verified secure mounting of all panels and hardware. Unit operating within normal parameters with no immediate service concerns identified; documented equipment condition with photographs for maintenance records.

Performed comprehensive Gold AC Inspection on backyard air conditioning unit. Conducted electrical diagnostics using digital multimeter to verify system voltages and amperage readings. Inspected and tested 10μF capacitor, confirming proper electrical connections and secure mounting. All wiring terminals examined for tightness and integrity, with no signs of overheating or corrosion detected. System operating within normal parameters with no deficiencies noted.

Responded to first-floor toilet not flushing properly with water failing to drain from bowl. Upon inspection, found original flush mechanism from 2014 showing significant wear and mineral buildup consistent with heavy daily use. Removed tank lid and assessed flush valve and fill valve assemblies, both exhibiting deterioration of internal components. Replaced complete flush valve assembly including flapper and overflow tube, and installed new fill valve with adjustable float mechanism. Tested flush cycle multiple times to verify proper water flow, bowl evacuation, and tank refill operation. Adjusted water level to manufacturer specifications and confirmed shut-off valve and supply line connections were secure with no leaks. Toilet now flushing completely and refilling properly.

Completed routine Gold AC inspection on a two-year-old outdoor condensing unit. Performed comprehensive tune-up including refrigerant level check, electrical connections inspection, condenser coil cleaning, fan motor operation verification, and amperage testing. Unit operating within manufacturer specifications with no deficiencies noted; system shows proper airflow and cooling capacity for continued reliable performance.

Performed comprehensive tune-up maintenance on two four-year-old Daikin air conditioning systems, one located in the basement and one in an upstairs utility closet. Completed full system inspections including cleaning condenser coils, checking refrigerant levels, testing electrical connections, verifying proper airflow, and confirming both units are operating within manufacturer specifications with no issues identified.

Conducted on-site assessment for mini split installation in sunroom. Evaluated exterior wall conditions, electrical service capacity at meter location, and existing electrical panel for adequate breaker space and amperage to support new mini split system. Documented installation pathway and photographed existing electrical infrastructure to prepare accurate installation quote.

Responded to water leak call for 1-year-old AC system. Upon inspection, identified failed condensate pump as source of leak. System was still operational and cooling properly, but condensate was not draining correctly from the evaporator coil. Replaced defective condensate pump with new unit, reconnected drain lines, and verified proper operation. Tested system through full cooling cycle to confirm condensate removal and no further leakage. All components functioning within normal parameters.

Responded to customer complaint of noise coming from outdoor condensing unit. Upon arrival, coordinated with office regarding service history noting contactor replacement performed one month prior. Conducted thorough inspection of outdoor unit and performed electrical diagnostics using clamp meter to evaluate compressor and fan motor amp draw. Verified proper operation of recently installed contactor and assessed all electrical connections. Inspected condenser fan assembly, including fan blades, motor, and wire guard for signs of wear, debris, or mechanical issues that could cause abnormal noise. System operational at time of inspection with all components running within normal parameters.

Completed comprehensive Gold AC inspection on a 5-year-old residential air conditioning system with outdoor condenser unit and basement-located air handler. Performed multi-point inspection including visual assessment of condenser unit showing proper installation on concrete pad with adequate clearance, verified operational status of all components, inspected fan assembly and coil condition, checked refrigerant lines, electrical connections, and overall system performance. Unit found to be in functional condition with normal operational wear appropriate for age, all safety checks passed, and system operating within manufacturer specifications.

Completed installation of Rheem commercial rooftop unit (RTU) on flat membrane roof system. Unit was properly positioned and secured with appropriate walkway pads installed for maintenance access, all electrical connections completed, and weatherproofing verified per manufacturer specifications. Equipment tested and confirmed operational with no visible defects or installation issues.

Responded to master bathroom shower exhibiting slow leak from showerhead and water leak at shower base with visible water damage along wall edges. Inspected and replaced faulty showerhead assembly to eliminate overhead drip. Removed shower faucet trim and cartridge to address cold water handle malfunction—cartridge was installed in reverse orientation causing counterclockwise rotation and squeaking operation. Installed new replacement cartridge in correct configuration, restoring proper hot/cold operation and eliminating squeaking noise. Removed damaged caulking at shower base perimeter and applied fresh silicone sealant to prevent water egress and further moisture intrusion into wall cavity. Tested all shower functions under full water pressure to verify leak elimination and proper valve operation. Recommended monitoring wall areas with existing water damage for drying and potential need for future cosmetic repair if discoloration persists.

Provided comprehensive estimate for complete HVAC system replacement including both air conditioning unit and furnace, both approximately 15 years old and nearing end of expected service life. Inspected existing outdoor condensing unit located in backyard showing visible weathering and rust staining on exterior surfaces, mounted on concrete pad with electrical disconnect and conduit connection to home. Evaluated basement furnace installation on opposite side of residence and reviewed existing LUX programmable thermostat currently controlling system. Documented equipment locations, configurations, and existing infrastructure including electrical connections, ductwork access, and installation requirements for replacement units. Discussed equipment options, system sizing requirements, and installation timeline with scheduling accommodations for optimal appointment availability.

Responded to a leaky toilet in the first floor master bathroom of a residential property. Upon inspection, removed the tank lid and assessed the internal flushing mechanism, which included a fill valve with float assembly and flush valve components showing signs of mineral buildup and discoloration. Diagnosed the source of the ongoing leak, performed necessary repairs to the toilet tank components, and documented the existing condition with photographs. The toilet was restored to proper working order with no further leakage detected upon completion of the repair.

Responded to no cooling complaint on four-year-old air conditioning system located in basement. Upon arrival, verified thermostat was set to cooling mode at 75°F but system was not operating. Performed diagnostic evaluation of indoor and outdoor equipment, checking electrical connections, refrigerant pressures, and control circuits. Identified failed component covered under manufacturer warranty. Documented equipment conditions with photographs of basement mechanical room showing AC system location and thermostat settings for warranty claim processing.

Completed comprehensive Gold AC Inspection on 24-year-old residential air conditioning system with air handler located in basement. Performed full system evaluation including visual inspection of outdoor condenser unit, electrical disconnect box, and associated electrical components. Verified proper operation of all system components, inspected electrical connections and wiring at disconnect, confirmed condenser unit condition and clearances around equipment. System found to be operational at time of inspection with all safety disconnects functioning properly.

Completed routine maintenance and tune-up on a 5-year-old outdoor air conditioning condenser unit located adjacent to the patio door. Performed comprehensive system inspection including checking refrigerant levels, cleaning condenser coils, inspecting electrical connections, testing capacitor and contactor operation, verifying proper fan motor function, and confirming adequate airflow through the top-mounted fan assembly. Unit is operating within normal parameters and ready for continued service through the 2026 contract maintenance period.

Completed comprehensive Gold AC inspection on a 6-year-old Comfortmaker SoftSound air conditioning system with air handler located in basement. Performed thorough examination of outdoor condenser unit, verified proper operation of all components, inspected condenser coils and protective grille, checked refrigerant lines, and confirmed system functionality. Unit found to be operating within normal parameters with no immediate service needs identified.