Your home should be a place of comfort, but when a pipe bursts, the heater stops working, or you need a new light installed, it can quickly turn into a source of stress. At FLAME Heating, Cooling, Plumbing & Electrical, we understand how disruptive these problems can be. That’s why we provide fast, reliable home services in Rochester Hills—so you can get back to enjoying your home without the worry of unexpected breakdowns. Whether it’s a heating repair, a plumbing emergency, or an electrical upgrade, call our experienced team at (586) 217-2512 or schedule your next service online.
Reliable Whole-Home Plumbing Services in Rochester Hills
Nothing disrupts your day faster than a plumbing issue—whether it’s a burst pipe soaking your floors in the middle of the night or a leaky toilet. These problems don’t just cause inconvenience; they can lead to costly damage if not handled quickly. Our Rochester Hills plumbing services are designed to meet any plumbing need your home might have, including:
- Water Heater Repair & Replacement – If your water heater isn’t providing enough hot water, or it has completely stopped working, we offer expert repair and replacement services to keep your home comfortable.
- Sewer Line Repair & Replacement in Rochester Hills – A damaged sewer line can cause major disruptions. Our team diagnoses and repairs issues to prevent backups and costly damage.
- Gas Line Services in Rochester hills – Whether you need a gas line installed for new appliances or suspect a gas leak, our experts provide safe, professional gas line services.
- Drain Cleaning & Clog Removal – Slow drains and stubborn clogs can lead to bigger plumbing problems. We clear blockages quickly to restore proper flow.
- Rochester Hills Kitchen & Bathroom Plumbing – From fixing leaky faucets to installing new fixtures, we handle all your kitchen and bathroom plumbing needs with precision.
- Sump Pump Installation & Repair – Protect your basement from flooding with a professionally installed or repaired sump pump.
- Backflow Prevention – Ensure your home’s water supply remains clean and uncontaminated with professional backflow prevention solutions.
Rochester Hills Air Conditioning Services for Reliable Cooling
When your AC struggles to keep up, every minute without cool air feels like an eternity. Whether your unit is running inefficiently, failing to cool certain rooms, or has stopped working entirely, our technicians are ready to restore comfort to your home with the best air conditioning services in Rochester Hills.
- AC Installation & Upgrades – If your air conditioner is outdated, we install high-efficiency models that provide better cooling and lower energy costs.
- Ductless AC Systems – Ideal for homes without ductwork, ductless mini-splits provide flexible cooling solutions.
- AC Repair & Troubleshooting in Rochester Hills – We diagnose and fix AC issues quickly so you can enjoy a cool, comfortable home again.
- Air Quality Solutions – We offer air purification, humidity control, and ventilation solutions to enhance indoor air quality.
- Seasonal Maintenance & Tune-Ups – Routine maintenance helps prevent unexpected breakdowns and improves energy efficiency.
Complete Rochester Hills Heating Services for Reliable Warmth
When the temperatures drop in Rochester Hills, a reliable heating system isn’t just about comfort—it’s a necessity. If your furnace is blowing cold air, your boiler isn’t keeping up, or your home just isn’t staying warm, it’s time to call in the experts. The team of Flame HVAC technicians in Rochester Hills provides fast, effective heating solutions to keep your home warm and energy-efficient throughout the season.
Furnace Repair & Replacement
If your furnace isn’t heating properly or has completely stopped working, our technicians can diagnose the issue and provide fast, reliable repairs. If it’s time for an upgrade, we’ll install a high-efficiency furnace that keeps your home warm while lowering energy costs.
Boiler Installation & Repair
Boilers provide consistent and efficient heating, but they require expert care to stay in peak condition. Whether you need a repair or a new installation, our team ensures your boiler runs safely and effectively.
Thermostat Upgrades
An outdated thermostat can lead to inefficient heating and higher energy bills. We install smart thermostats that give you better control over your home’s temperature, improving comfort and energy efficiency.
Ductless Mini-Split Systems
For homes without existing ductwork, ductless mini-splits provide zoned heating that’s both efficient and customizable. We install and service these systems to give you targeted comfort where you need it most.
Preventative Maintenance
Routine maintenance extends the life of your heating system and helps prevent costly breakdowns. Our expert tune-ups ensure your furnace or boiler operates efficiently, saving you money on energy bills and repairs.
Professional Electrical Services in Rochester Hills
Electrical issues can be frustrating and, in some cases, dangerous. Flickering lights, outlets that suddenly stop working, or constantly tripping breakers are often signs of a deeper problem. Instead of ignoring them or relying on temporary fixes, trust our licensed electricians to provide safe, long-term solutions. Whether it’s upgrading outdated wiring, installing additional outlets, or troubleshooting an electrical failure, our Rochester Hills electrical services ensure your home stays powered and protected.
- Electrical Panel Upgrades – Upgrade outdated panels to handle modern power needs safely and efficiently.
- Whole-Home Rewiring – Prevent electrical hazards by replacing aging or faulty wiring with a safer, more efficient system.
- Backup Generator Installation – Stay prepared for power outages with a whole-home generator that keeps essential appliances running.
- Lighting & Outlet Installations – Improve the functionality of your living space with additional outlets and professionally installed lighting.
- EV Charger Installation – Charge your electric vehicle conveniently at home with a professionally installed EV charging station.
- Surge Protection – Prevent damage to appliances and electronics caused by unexpected power surges.
- Ceiling Fan Installation – Enhance comfort and energy efficiency with professionally installed ceiling fans.
Schedule Your Next Home Service in Rochester Hills Today
When you need expert home services in Rochester Hills, trust the professionals at FLAME Heating, Cooling, Plumbing & Electrical. Get in touch with us today by calling (586) 217-2512 to schedule an appointment and let our team ensure your home stays safe, comfortable, and running smoothly.
Recent Jobs and Reviews in Rochester Hills , MI
Rochester Hills, MI at a glance
Flame Heating, Cooling, Plumbing, Electrical has completed 20 jobs in Rochester Hills, MI in May 2026.
The most recent job was on May 20, 2026.
Flame Heating, Cooling, Plumbing, Electrical has completed 216 jobs in Rochester Hills, MI in the last 12 months.
Job Locations and Reviews
Responded to service call following electrician's assessment that determined breaker was functional and issue originated at outdoor condenser unit. Upon inspection, discovered heavily corroded capacitor with severe rust damage on casing and terminal connections, indicating prolonged moisture exposure and component failure. Capacitor exhibited oxidation and deterioration that compromised electrical connections and system operation. Documented equipment condition with photographs showing extent of corrosion damage to capacitor and surrounding electrical components within condenser housing.
Completed comprehensive Gold AC inspection on residential split system with outdoor condensing unit located at side of property and air handler positioned on main floor. Unit confirmed operational prior to inspection. Performed thorough visual assessment of outdoor condenser, noting weathering and dirt accumulation on fan guard and housing consistent with age of equipment. Inspected refrigerant lines, electrical conduit, and mounting pad for proper installation and condition. Documented equipment positioning between buildings with lattice screening enclosure and vegetation growth around base requiring attention for optimal airflow. Verified manufacturer information plate present and legible on unit. Inspection completed under suitable weather conditions as required for accurate system evaluation.
Responded to no-cooling call where outdoor condensing unit failed to operate while indoor blower ran normally and thermostat indicated cooling mode. Diagnosed electrical failure preventing compressor and condenser fan operation. Identified and replaced defective contactor and verified proper voltage supply to outdoor unit. Tested system operation through complete cooling cycle, confirmed proper amperage draw on compressor, and verified thermostat communication with equipment. System restored to full cooling capacity.
Provided estimate for complete HVAC system replacement in garage location, including ductless mini-split system and natural gas furnace installation. Assessed installation area and documented mounting location for indoor air handler on wall space above existing storage shelving. Reviewed equipment specifications and discussed system requirements with customer to ensure proper sizing and configuration for the space.
Performed system start-up on newly installed air conditioning unit with basement evaporator coil. Connected refrigerant manifold gauges to service ports and verified proper refrigerant charge levels, system pressures, and overall unit operation to ensure equipment was functioning within manufacturer specifications.
Completed new air conditioning system start-up and commissioning. Addressed customer concerns regarding cosmetic marks on metal ductwork and evaluated thermostat placement, documenting current installation with photos for potential future adjustments. System operational and functioning within manufacturer specifications.
Responded to no-cool complaint on 3-year-old AC system located in basement. Unit was attempting to start but shutting down immediately after initial startup. Diagnosed and repaired faulty component preventing proper system operation. Verified thermostat communication and settings, confirmed proper airflow through air handler and ductwork, and tested system through complete cooling cycle. Unit now operating within manufacturer specifications with normal startup sequence and sustained cooling output.
Completed routine air conditioning maintenance on a 2-year-old AC system with basement coil configuration. Performed standard tune-up procedures including inspection of outdoor condensing unit, verification of proper operation, and system evaluation. All components found to be functioning within normal parameters with no immediate repairs required.
Completed comprehensive Gold AC inspection on 1-year-old Bryant HVAC system with air handler located in basement. Verified proper thermostat operation on White-Rodgers programmable unit displaying appropriate temperature readings and functional control settings. Inspected furnace unit, ductwork connections, and associated components with all equipment confirmed operational and in good working condition. System passed inspection with no deficiencies noted.
Responded to mechanical violation notice by addressing two warranty issues on recently installed HVAC system. Resealed the bottom of the humidifier unit to eliminate potential moisture intrusion points. Resolved condensate leak occurring inside the furnace cabinet by inspecting drain pan integrity, verifying proper drainage flow through PVC condensate lines, and ensuring all connections were secure and properly sealed to prevent future water accumulation.
Coordinated with municipal water department for scheduled water shut-off and completed on-site installation and repair work involving backflow preventer, plumbing connections, and sump pump system. Plumber maintained required presence during city water department operations to ensure compliance with municipal regulations. All components were properly installed, tested, and documented with photographic records of the backflow preventer assembly and exterior plumbing installations at the property foundation area.
Completed comprehensive Gold-level air conditioning inspection on a 10-12 year old single-zone residential cooling system with air handler located in basement. Performed thorough examination of outdoor condenser unit, including visual assessment of fan assembly, housing integrity, and overall component condition. Documented system operation and captured detailed photographs showing condenser fan configuration with radial aluminum fins, central motor assembly, and unit placement on concrete pad. Noted weathering consistent with outdoor exposure and identified visible crack in exterior panel casing. Verified unit operational status and completed full inspection protocol as requested by homeowner.
Completed comprehensive Gold AC inspection on 2019 HVAC system with air handler located in basement. Performed full system evaluation including inspection of air handler unit, thermostat functionality verification showing proper temperature reading at 68 degrees, and documentation of equipment condition. All components operating within normal parameters with no immediate service needs identified at time of inspection.
Completed air conditioning system startup on outdoor condensing unit. Performed operational testing and system diagnostics to verify proper function of newly installed equipment. Unit energized and confirmed operational parameters within manufacturer specifications.
Completed installation of 3-ton Lennox air conditioning system with matching evaporator coil in left-side configuration. Installed new condensate pump with drainage line, programmable thermostat with decorative wall plate, and reconnected all electrical and refrigerant lines to specifications. System tested and verified operational with proper airflow and cooling performance.
Completed installation of a 50-gallon Bradford White tanked water heater in basement utility area. Configured copper supply piping with brass shut-off valves, installed expansion tank, and connected flexible gas line to unit. All plumbing connections were properly secured and tested to ensure system functionality and code compliance.
Completed full HVAC system installation including 110,000 BTU furnace and 4-ton air conditioning unit with left-side configuration. Installed air handler with flexible ductwork connections, white PVC condensate drainage piping, and reconnected existing humidifier to new system. Applied for mechanical permit and documented utility rebate eligibility for energy-efficient equipment installation.
Completed installation of 3-ton Lennox Elite Series EL15KC1 air conditioning system with matching evaporator coil on existing Goodman furnace. System was positioned on right side per specifications, with all electrical connections, refrigerant lines, and condensate drainage properly installed and tested. Mechanical permit was requested for HVAC components only, with electrical reconnection performed separately as coordinated.
Completed comprehensive cooling maintenance and AC tune-up on an 11-year-old Bryant system that was operating properly upon arrival. Performed standard inspection procedures on the outdoor condenser unit, which was found to be in clean and well-maintained condition with no visible signs of damage, rust, or deterioration. System tested and confirmed working within normal parameters following maintenance service.
Responded to service call for 50-gallon tank water heater experiencing diminished heating capacity over time. Performed diagnostic assessment of existing water heater system, inspected all plumbing connections, supply lines, and associated infrastructure in basement utility area. Verified unit specifications, evaluated heating element performance, and assessed overall system condition. Provided verification of quoted equipment capacity and generated updated quote as requested for water heater replacement to restore adequate hot water supply to residence.
