Your home is more than just a building—it’s where life happens. Whether you’re cooking dinner, unwinding after a long day, or getting ready for a busy morning, everything should work as it should. But when the lights flicker unexpectedly, the water heater gives out, or the AC stops cooling in the middle of summer, those daily routines can quickly turn into stress. That’s where FLAME Heating, Cooling, Plumbing & Electrical comes in. We provide fast, reliable home service in Southfield, ensuring that your home stays safe, comfortable, and fully operational—no matter what comes your way. When repairs need to happen fast, call the FLAME team at (586) 217-2512 or schedule your next service visit online today.
Professional Electrical Services in Southfield
Electrical problems aren’t just annoying—they can be unsettling and even dangerous. A single flickering light might seem harmless, but when your outlets stop working or your breaker trips repeatedly, it’s a sign of a deeper issue. Ignoring these warning signs can lead to costly damage or even fire hazards. The Southfield electrical services by FLAME work to ensure your home’s electrical system is safe, efficient, and built to handle your daily needs with confidence.
- Whole-Home Rewiring – Outdated wiring can create serious hazards, from frequent power failures to fire risks.
- Electrical Panel Upgrades – If your home’s electrical panel struggles to handle your appliances or frequently trips breakers, it may be time for an upgrade.
- Lighting & Outlet Installations – Whether you’re upgrading an old space or remodeling, we install energy-efficient lighting and strategically placed outlets to improve your home’s convenience and functionality.
- Backup Generator Installation – Power outages can happen at any time, but with a whole-home generator, you’ll never have to worry.
- Ceiling Fan Installation – Reduce energy costs and improve airflow with a professionally installed ceiling fan.
- EV Charger Installation – Electric vehicles are the future, and having a home charging station makes ownership easier..
- Surge Protection – Sudden power surges can fry electronics and damage expensive appliances.
Reliable Plumbing Services in Southfield
A slow drain or a small leak might not seem like a big deal—until it turns into a flooded bathroom or a burst pipe in the middle of the night. Plumbing issues have a way of going from minor annoyances to major disruptions in no time. Whether it’s a failing water heater that leaves you with cold showers or a clogged drain backing up your sink, our team provides fast, precise Southfield plumbing services to get your home back to normal.
- Water Heater Repair & Installation – Ensure reliable hot water with expert repairs or a high-efficiency replacement.
- Sewer Line Repair & Replacement – Prevent backups and costly damage with expert sewer line services.
- Gas Line Installation & Repair in Southfield – Keep your home safe with properly installed and maintained gas lines.
- Drain Cleaning & Clog Removal – Stubborn clogs? We clear them fast before they become bigger issues.
- Sump Pump Installation & Repair – Protect your basement from water damage with reliable sump pump services.
- Kitchen & Bathroom Plumbing – From leaky faucets to complete fixture upgrades, we’ve got you covered.
- Southfield Backflow Prevention – Keep your water supply clean with professional backflow prevention solutions.
Dependable Heating Services in Southfield
If your heating system is making unusual noises, running inconsistently, or simply failing to keep your home warm, our expert team is here to diagnose and fix the issue quickly. We ensure your home stays warm, energy-efficient, and ready to handle the coldest days of the season. With industry-leading Southfield heating services from Flame, you’ll have a partner you can trust.
Furnace Repair & Replacement
Is your furnace struggling to keep your home warm? If it’s blowing cold air, making loud noises, or failing to start, it’s time for expert service. Our team quickly diagnoses the problem and provides repairs or a high-efficiency replacement to ensure consistent, reliable heating.
Boiler Installation & Repair
Boilers are a dependable heating solution, but they need proper care to function efficiently. Whether your boiler is failing to heat properly or you’re looking to upgrade, we provide expert Southfield boiler repair and installation services tailored to your home’s needs.
Ductless Mini-Split Systems
For homes without ductwork or those needing zoned heating, ductless mini-split systems offer flexible and efficient comfort. Our team installs and maintains these systems, ensuring optimal performance year-round.
Thermostat Upgrades
Upgrading your thermostat can make a significant difference in your comfort and energy savings. We install smart thermostats in Southfield that give you better control over your heating system, helping reduce waste and lower energy bills.
Preventative Maintenance
Routine maintenance is key to preventing costly breakdowns and extending the lifespan of your heating system. Our expert tune-ups keep your furnace or boiler running efficiently, reducing energy costs and ensuring reliable warmth throughout the winter.
Southfield’s Choice for Cooling Services
You wake up in the middle of the night, drenched in sweat, only to realize your AC isn’t working. Or maybe you come home from work expecting relief from the heat, but instead, your house feels just as hot as the air outside. From quick repairs to full system upgrades, we ensure your home stays cool and comfortable, even on the hottest Southfield days. Our air conditioning services in Southfield include:
- Southfield AC Installation & Upgrades – Upgrade to a high-efficiency cooling system for better performance and lower energy bills.
- AC Repair & Troubleshooting – If your AC isn’t cooling properly, we’ll diagnose and fix the issue fast.
- Ductless AC Systems – Ideal for homes without ductwork, providing energy-efficient, customizable cooling.
- Air Quality Solutions in Southfield – Improve indoor air with purification, humidity control, and ventilation services.
- Seasonal Maintenance & Tune-Ups – Keep your system running efficiently and prevent breakdowns with routine servicing.
Why Southfield Homeowners Choose FLAME
For years, Southfield residents have trusted FLAME Heating, Cooling, Plumbing & Electrical for professional service and reliable results. We’re committed to quality workmanship and customer satisfaction.
- Experienced & Certified Technicians – Our skilled professionals get the job done right the first time.
- Upfront, Honest Pricing – No surprises—just transparent pricing for every service.
- Fast, Reliable Service – We respond quickly to resolve your home service needs.
- Comprehensive Solutions – We handle heating, cooling, plumbing, and electrical—one trusted provider for all your needs.
- Customer-First Approach – Your comfort and satisfaction are our top priorities.
Book Your Service with FLAME Today
Need a trusted team to handle your home’s heating, cooling, plumbing, or electrical needs in Southfield? FLAME is here to help. Give (586) 217-2512 a call today to schedule your service and see why homeowners rely on us to keep their homes running smoothly, safely, and efficiently.
Recent Jobs and Reviews in Southfield , MI
Job Locations and Reviews
Conducted comprehensive estimate for complete HVAC system replacement in medium-sized residential property (1500-3000 sq.ft.). Assessed existing basement installation including gas furnace and air conditioning system for vertical upflow/downflow configuration. Evaluated electrical panel capacity and provided estimate for panel upgrade to support new Lennox heating and cooling equipment. Inspected existing ductwork, condensate drainage lines, and electrical connections to determine scope of replacement work required for natural gas furnace and AC system installation.
Responded to follow-up service call for central air conditioning system with reported refrigerant leak and inadequate cooling performance identified during previous maintenance visit. Performed comprehensive leak detection on outdoor condenser unit and refrigerant lines using electronic leak detector. Located and repaired refrigerant leak, evacuated system, and recharged to manufacturer specifications. Verified proper system operation, temperature differential, and cooling performance upon completion.
Completed routine AC tune-up maintenance on basement air conditioning system of unknown age with no reported issues. Performed standard preventive maintenance procedures including inspection of ductwork, refrigerant lines, electrical connections, and associated HVAC components. System found in operational condition with typical dust accumulation on ductwork and surrounding equipment consistent with normal use.
Performed diagnostic evaluation on 10+ year old cooling system located in basement to assess repair needs prior to potential replacement. Conducted electrical testing using digital multimeter on system components and utilized borescope camera to inspect internal evaporator coil condition and refrigerant lines. System evaluated with Lennox high efficiency filter unit in place, checking electrical connections, control mechanisms, and heat exchanger components for operational integrity and identifying any necessary repairs.
Responded to service call for sump pump with water continuously running in basin. Upon inspection, found sump pump float switch mechanism malfunctioning, causing pump to cycle improperly and preventing automatic shutoff. Tested pump operation and confirmed float switch was stuck in activation position due to debris accumulation. Cleaned sump basin of sediment and debris, freed float switch mechanism, and verified proper float travel range. Tested pump through multiple cycles to ensure proper activation at correct water levels and automatic shutoff functionality. Confirmed discharge piping and check valve operating correctly with no backflow issues. System now cycling properly with appropriate on/off intervals based on water level.
Completed comprehensive Gold AC Inspection and tune-up on Lennox outdoor condensing unit as part of annual preventive maintenance plan. System was operational upon arrival and confirmed working properly throughout inspection. Performed complete diagnostic evaluation including refrigerant level verification, electrical component testing, condenser coil cleaning, and airflow measurements. Inspected and tested all safety controls, contactors, and capacitors for proper operation. Verified correct amperage draw on compressor and fan motor. Cleaned condenser unit exterior and cleared debris from surrounding area. All components found to be functioning within manufacturer specifications with no deficiencies noted. Unit is in good operating condition and ready for continued service through the cooling season.
Completed electrical service for kitchen lighting fixtures in a galley-style kitchen. Verified proper operation of multiple recessed LED ceiling fixtures throughout the space, ensuring even illumination and secure installation. All fixtures tested and functioning correctly upon completion of service call.
Conducted comprehensive site evaluation for full HVAC system replacement in residential property. Assessed interior spaces including living areas to determine optimal equipment placement, load calculations, and installation requirements for new heating and cooling system.
Completed routine AC tune-up on residential air conditioning system located in basement with outdoor condenser unit positioned in backyard. Performed standard maintenance procedures including inspection of condenser coils, fan operation verification, and system performance evaluation. Unit operating properly with no issues identified; customer reported no concerns prior to service.
Completed comprehensive Gold AC Tune-Up on 10-year-old air conditioning system. Performed thorough inspection of electrical connections, contactors, and terminal blocks, verifying all wire terminations were secure and properly torqued. Measured supply air temperature at 65.3°F using calibrated digital thermometer to confirm system operation. Cleaned accumulated dust and debris from electrical components and enclosure, inspected condenser unit located at rear of property, checked refrigerant levels, and verified proper system cycling and performance parameters are within manufacturer specifications.
Installed a new 1 1/4" backflow preventer assembly on exterior brick wall using copper piping configuration with shutoff valves. Completed installation per permit requirements, ensuring proper vertical mounting and secure connections to existing plumbing system. Documented completed installation showing backflow device with test cocks, blue-handled shutoff valve at top, and black-handled isolation valve at bottom connection point.
Completed electrical box replacement at residential property. Replaced existing weathered exterior meter enclosure and associated conduit showing significant oxidation and environmental degradation. Installed new meter housing with proper grounding and secure conduit connections to maintain utility service integrity and code compliance.
Conducted comprehensive assessment of existing outdoor air conditioning unit and electrical infrastructure for equipment replacement estimate. Documented current system condition including weathered condensing unit on concrete pad with aged electrical disconnect, evaluated utility meter location and conduit routing on exterior brick wall, and photographed site conditions including landscape proximity and foundation clearances to provide accurate replacement specifications.
Performed comprehensive tune-up and preventive maintenance on 10-year-old residential furnace system located in basement and exterior condensing unit. Conducted full system inspection of both indoor and outdoor components, including visual examination of heat exchanger, burner assembly, blower motor, and electrical connections on furnace. Inspected outdoor condensing unit positioned on concrete pad, verifying proper operation of condenser coils, fan motor, and refrigerant lines. Cleaned condenser coils and checked airflow through louvered cabinet. Tested all safety controls, verified proper thermostat operation, and measured temperature differentials across system. Checked and tightened electrical connections, lubricated moving components as needed, and replaced air filter. System operating within manufacturer specifications with no deficiencies noted. Customer reported no prior issues; routine maintenance completed successfully with all components functioning properly.
Completed prepaid maintenance visit on basement furnace system as requested by customer. Performed thorough inspection of humidifier unit, examining water panel filter condition and verifying proper operation of distribution tube and motor assembly. All HVAC equipment including water heater and associated utility connections were assessed and found to be in satisfactory working condition.
Serviced two exterior hose bibs on a 1950s-era home requiring maintenance and upgrades. Replaced worn washers on both front and backyard spigots to eliminate leaks. Installed a new frost-proof sillcock in the backyard with extended stem penetration into the basement to provide freeze protection for the aging plumbing system. Replaced the deteriorated shutoff valve serving the front yard spigot inside the basement. Added a new interior shutoff valve in the basement for improved isolation and control of one exterior fixture. All work completed to address minor repair needs with no immediate urgency, ensuring reliable operation of exterior water access points.
Performed comprehensive AC tune-up on 10-year-old outdoor condenser unit and 15-year-old gas furnace system located in basement. Conducted visual inspection of both units, verified proper operation of gas valve and burner assembly with clean blue flame pattern across all burner ports, and confirmed draft inducer motor functioning correctly. Inspected outdoor condenser unit positioned on concrete pad, checked fan operation and grille condition, verified refrigerant lines and electrical connections secure, and assessed overall system performance. Both heating and cooling components operating within normal parameters with no immediate concerns identified. System maintained per manufacturer specifications with no deficiencies noted during inspection.
Completed comprehensive Gold AC tune-up on 7-year-old residential air conditioning system with outdoor condenser unit and basement components. Performed full system inspection including refrigerant levels, electrical connections, condenser coil cleaning, fan motor operation, and thermostat calibration. Unit operating within manufacturer specifications with no deficiencies noted; all components functioning properly and system ready for cooling season.
Responded to no-cooling complaint on 3-year-old outdoor AC unit where only the fan was operating. Upon inspection, discovered severely clogged and deteriorated air filter with heavy debris accumulation, torn edges, and compromised filter media that was restricting airflow and preventing proper system operation. Replaced damaged filter with new unit, restoring normal airflow and cooling function to the system under warranty coverage.
Completed comprehensive Gold AC inspection on a 1-year-old single-unit air conditioning system with air handler located in basement. Verified operational status of both indoor and outdoor components, checked refrigerant line levelness and mounting integrity, inspected condenser pad alignment and stability, and documented equipment condition through photographic records. All system components found to be functioning properly with homeowner present during inspection.
