Heating and Cooling Birmingham

Responded to recurring kitchen sink drainage issue with persistent gurgling noises occurring over five-day period. Previous drain clearing attempts in April provided only temporary relief. Performed main line snaking procedure to clear obstruction and restore proper drainage flow. Inspected plumbing infrastructure in basement area, documenting existing PVC and older metal pipe connections at junction points to assess system condition and identify potential causes of recurring blockage.

Completed full HVAC system installation including 90,000 BTU furnace and 3-ton air conditioning unit in rear yard location. Installed air handler in attic space with proper ductwork connections, refrigerant lines with service ports, and PVC condensate drainage. Added humidifier integration and verified all electrical connections, control boards, and safety systems. Requested mechanical and electrical permits, completed system startup, and registered equipment for available utility rebates under AHRI certification 216722098.

Completed electrical service work at residential property involving circuit breaker panel inspection and outlet installation. Accessed main electrical panel mounted in utility area adjacent to water heater, verified proper breaker configuration and panel labeling. Installed new electrical outlet in corner area near floor level with dark wood flooring and tiled wall section, ensuring proper grounding and secure mounting to meet current electrical code requirements. Connected power supply, tested outlet functionality, and confirmed safe operation of all installed components.

Completed Gold AC Inspection on two 8-year-old outdoor condensing units serving a multi-zone residential system with air handler located in basement. Performed comprehensive maintenance including visual inspection of both condenser units positioned on concrete pad, verified proper operation of fan motors and compressors, inspected condenser coils and fins for damage or blockage, checked electrical connections and disconnect boxes, confirmed refrigerant line integrity, and assessed overall system performance. Both units operating within normal parameters with adequate airflow through top-mounted fan grilles. Noted minor debris accumulation around unit perimeter and between condensers; area surrounding equipment shows typical seasonal leaf fall but no significant obstructions affecting operation. Electrical conduit and junction boxes properly secured to exterior wall with no visible damage. Units mounted on appropriate pads with proper clearances maintained. System confirmed operational

Completed installation of 4-ton air conditioning system with uncased evaporator coil on existing furnace unit. Connected refrigerant lines to right-side configuration, installed necessary ductwork modifications, and completed all electrical reconnections. Mechanical, electrical, and air conditioning permits were obtained prior to installation, and system was tested for proper operation upon completion.

Conducted on-site evaluation for HVAC system replacement estimate including natural gas furnace, air conditioning unit, and mini-split system. Existing outdoor condensing unit located at ground level on building exterior with light green vinyl siding showed signs of weathering but remains operational. Documented current equipment configuration including electrical conduit routing, service panel connections, and refrigerant line placement. Assessed installation conditions noting accumulated debris around outdoor unit and existing mounting location on dark mulch base. Evaluated basement furnace location and upper floor equipment placement for replacement specifications. Photographed existing condensing unit showing cylindrical metal casing with vertical grille fins, top-mounted fan assembly with radial blade configuration, and surrounding electrical infrastructure. Reviewed natural gas fuel supply for furnace replacement requirements and confirmed accessibility for future installation wo

Conducted replacement estimate for a non-operational 10+ year old 4-ton air conditioning system with outdoor condenser unit and basement-located natural gas furnace. Assessed existing equipment configuration including electrical disconnect, conduit routing, and PVC venting system to determine proper replacement specifications maintaining equivalent 4-ton cooling capacity for the residence.

Responded to report of slow-draining bathroom fixture on second floor and kitchen drain issues in 3-year-old home. Performed drain cleaning service on affected fixtures to restore proper flow and drainage. Cleared blockages and verified both drains were functioning correctly upon completion.

Responded to no cooling complaint and performed diagnostic assessment of air conditioning system. Inspected electrical panel and thermostat to evaluate system operation and identify cause of failure. Documented existing equipment configuration and provided estimate for complete system replacement.

Completed comprehensive Gold AC inspection and preventative maintenance on 6-year-old residential air conditioning system. Attic-located air handler and outdoor condensing unit inspected and serviced per manufacturer specifications. **Outdoor Condensing Unit:** Inspected condenser unit positioned on mounting pad with proper clearances maintained. Verified fan motor operation and blade condition - fan guard secure with no obstructions. Cleaned condenser coil fins and straightened any bent fins to optimize airflow and heat transfer efficiency. Checked refrigerant lines for proper insulation and signs of wear or damage. Inspected electrical connections, contactor operation, and capacitor performance. Verified proper amp draw on compressor and fan motor. Checked unit level on pad and confirmed secure mounting. Cleared debris from base and surrounding area. **Attic Air Handler:** Performed complete inspection of indoor air handling unit. Replaced air filter with proper size and MERV ratin

Completed full installation of 3-ton air conditioning system with matching evaporator coil in left side yard location. Installed new outdoor condensing unit in narrow space between brick wall and building exterior, mounted electrical disconnect box with proper conduit routing, and connected refrigerant lines. Installed air handler with new evaporator coil in attic space, replaced condensate drain pan as needed, installed wet switch for overflow protection, and flushed refrigerant lines prior to system startup. Secured all necessary mechanical and electrical permits, verified proper system operation, and confirmed all components functioning to manufacturer specifications.

Completed comprehensive tune-up service on two residential air conditioning units, including a 2-year-old system with basement coil configuration. Performed thorough inspection of both outdoor condensing units, verified proper fan operation and protective guard integrity, and assessed overall system condition. Conducted additional inspections of thermostat functionality, humidifier operation, and Navien tankless water heater to ensure all mechanical systems were operating within manufacturer specifications.

Completed HVAC estimate for system replacement at residential property. Assessment included evaluation of existing thermostat control system and mechanical room equipment configuration, including ductwork layout, water heater installation, and available utility space for new equipment placement. Documentation captured current system conditions to support replacement specifications and installation planning.

Completed comprehensive Gold AC Inspection on outdoor condensing unit. Performed diagnostic testing using digital manifold gauges to measure system pressures and verify refrigerant charge levels. Inspected condenser coil fins, fan operation, electrical connections, and drainage system including flexible drain line. Unit operating within normal parameters with no immediate service needs identified.

Responded to a complete A/C system shutdown with water leakage on a five-year-old unit located on the third floor. Upon inspection of the attic-mounted HVAC system, identified and addressed drainage issues affecting the condensate removal system. Verified proper operation of the condensate drain lines, checked the primary and secondary drain pans for blockages, and ensured all PVC drainage piping was functioning correctly. Tested system operation to confirm unit cycling properly without premature shutdown, inspected evaporator coil and drain pan assembly for proper water flow, and verified all safety switches were operating within normal parameters. Unit restored to full operational status with no further water leakage detected.

Completed comprehensive Gold AC inspection on 8-year-old residential air conditioning system with outdoor condensing unit and basement air handler. Performed visual inspection of exterior condensing unit, verified proper placement on pad, checked refrigerant line connections and condensate drainage system. Conducted electrical diagnostics using clamp meter to test amperage draw, verified capacitor ratings at 45/5 MFD, inspected all electrical connections and wiring for proper operation. System found to be operating within normal parameters with no immediate service needs identified.

Responded to a drain cleaning service call at a residential property. Upon arrival, installed protective red plastic floor runners throughout the interior hallway and staircase to prevent damage to light wood-tone flooring and carpeted stairs during service. Successfully cleared the clogged drain/sink using standard drain cleaning equipment and techniques. All protective materials were properly placed to maintain cleanliness of the work area throughout the service call. Homeowner confirmed satisfactory resolution of the drainage issue upon completion.

Completed Gold AC Inspection on a 5-year-old residential air conditioning system with outdoor condenser unit and attic-located air handler. Performed comprehensive maintenance inspection of the condenser unit, which was found in operational condition with normal outdoor weathering on metal components and proper fan assembly function. All inspection protocols were completed per Gold service standards, with photographic documentation captured for service records.

Responded to callback for persistent whistling noise in furnace following previous service where caulking was applied. Performed visual inspection of furnace components and ductwork using borescope camera to identify source of whistling. Inspected floor register and supply ductwork for air leaks or restrictions that could cause noise issues. Documented findings with inspection camera showing interior duct conditions and heat exchanger components to determine if additional sealing or adjustments are required to resolve the whistling concern.

Completed routine AC tune-up on 2-year-old residential air conditioning system with outdoor condenser unit installed on concrete pad adjacent to building. Performed standard maintenance protocol including inspection of condenser coils, fan motor operation, refrigerant levels, electrical connections, and overall system performance. Unit operating within normal parameters with no deficiencies noted or repairs required.