Heating and Cooling Bloomfield Township

Completed comprehensive Gold Plan inspection on residential HVAC system including furnace and air conditioning unit. Performed thorough tune-up and safety inspection of gas furnace with visual confirmation of proper burner ignition and flame characteristics showing appropriate blue flame pattern across all burners. Inspected gas valve assembly, electrical connections, and blower motor components for proper operation. Evaluated outdoor condenser unit positioned on concrete pad against exterior brick wall, checking refrigerant line connections, electrical service components including meter and junction boxes, and overall system condition. Documented equipment status through photographs showing active furnace operation and exterior unit installation. All components operating within normal parameters at time of inspection.

Responded to service call for exterior hose spigot reported as broken by HVAC technician during routine maintenance. Upon inspection, identified damaged exterior faucet assembly mounted to brick wall with compromised connection points and potential for water intrusion. Assessed exterior utility piping system including associated black conduit runs and mounting hardware secured to brick facade. Evaluated interior supply line connections including braided flex line and corrugated feed hose with visible mounting brackets showing signs of age-related deterioration and paint failure on surrounding trim work. Documented existing conditions of both exterior spigot installation and interior plumbing connections to determine appropriate repair recommendations and prevent potential leak damage.

Responded to gas line repair estimate request and performed thorough inspection of existing gas line installation serving fireplace unit. Documented current configuration including brass shut-off valve with red handle, corrugated stainless steel tubing (CSST) connection, and associated fittings at wall penetration point between brick and drywall surfaces. Evaluated gas line routing from supply point through wall assembly to fireplace appliance, noting flexible gas connector installation and valve accessibility. Captured detailed photographs of gas piping components, connections, and fireplace interior to support repair estimate development and identify scope of work required for code-compliant gas line modifications or replacement.

Corrected a code violation where the water heater B-vent was in direct contact with the furnace PVC vent pipe. Repositioned and secured the B-vent to maintain the required 1-inch clearance from combustible materials and adjacent piping, bringing the installation into compliance with safety standards.

Completed air conditioning system start-up and commissioning for newly installed basement evaporator coil. Verified proper thermostat operation and system functionality, confirmed all controls responding correctly, and documented installation with photos showing thermostat mounted and operational.

Responded to service call for boiler and radiant floor heating system that would not shut off when thermostat was turned off. Upon arrival, inspected wall-mounted zone manifold system with five copper pipe runs and individual zone control valves in garage location. Diagnosed faulty zone valve or control relay causing continuous operation. Documented existing manifold configuration with multiple heating zones, ball valves with identification tags, and electrical control box. Photographed installation for service records showing proper copper piping, flexible connectors, and mounting hardware.

Completed comprehensive Gold AC Inspection and spring maintenance on three residential air conditioning units: one 2-year-old system and two 15-year-old systems. Performed thorough cleaning of condenser coils, inspected fan assemblies and protective grilles, verified proper operation of all electrical connections and service ports, and cleared debris from unit exteriors and surrounding areas. All systems tested and operating within normal parameters following tune-up procedures.

Completed Gold AC Inspection on 22-year-old residential air conditioning system with air handler located in basement. Performed comprehensive evaluation of outdoor condensing unit positioned on concrete pad against exterior wall, verified operational status of compressor and condenser fan motor, inspected refrigerant lines and electrical connections, and assessed overall system performance. Unit found operating properly with no immediate service needs identified at time of inspection.

Completed routine AC tune-up maintenance on two 7-year-old outdoor condenser units as part of Gold Club membership. Performed comprehensive system inspection including electrical connections, refrigerant levels, amperage draws, and component operation. Both units operating within manufacturer specifications. Noted significant rust and corrosion on fan guards of both condensers due to prolonged weather exposure, though not affecting current system performance. Verified proper airflow through condenser coils, checked capacitor values, and ensured all safety controls functioning correctly. Replaced air filter and cleared debris from gravel pad surrounding units. Systems cooling efficiently with no immediate service needs identified. Recommended monitoring fan guard condition for potential future replacement to prevent deterioration of underlying components.

Responded to service call for dripping outdoor spigot in yard. Upon inspection, identified heavily corroded gate valve and pipe assembly with significant rust buildup at connection points. The corrosion was causing seal failure, resulting in continuous dripping from the hose bib. Replaced deteriorated gate valve and corroded pipe fittings with new galvanized components. Secured all connections and tested system under full water pressure to verify leak was eliminated and proper shutoff function was restored.

Responded to service call for overheating boiler in garage. Upon arrival, found 70-year-old boiler system experiencing temperature regulation issues. Performed diagnostic inspection of antiquated equipment, documented existing mechanical and control components with photography, and assessed overall system condition. Advised customer that due to the age of the unit and current operational concerns, replacement should be considered in the near future to ensure safe and reliable heating operation.

Conducted comprehensive assessment of existing 12-year-old Carrier furnace and air conditioning system in basement mechanical room to provide replacement estimate. Documented current equipment configuration, including air handler unit, ductwork connections, and associated mechanical components. Photographed existing HVAC installation showing furnace positioning, duct routing, copper piping connections, and available clearances for future equipment replacement planning.

Successfully installed a new 50-gallon short water heater in basement utility area. Completed all necessary plumbing connections with properly primed PVC piping and ensured proper venting through existing metal ductwork. System was tested and confirmed operational with all connections secure.

Performed Gold Furnace Inspection on a 10+ year old forced air system located in the basement. Conducted a comprehensive examination of the unit, including checking the intercom system mounted on the exterior brick wall. Used specialized L-shaped tool for accessing and testing internal components. Customer was present during inspection.

Performed diagnostic service on 8-year-old tanked water heater exhibiting intermittent hot water supply issues. Inspected the "Defender System" and associated copper/PVC piping configuration. Identified and addressed mineral buildup in the heat exchanger affecting temperature consistency, restoring proper hot water functionality.

Performed service on residential steam humidifier showing sediment buildup in the water container. Inspected system components including digital control panel (reading 5.1A) and drainage functionality. Cleaned accumulated mineral deposits and verified proper operation of the humidification system to resolve reported humidity issues.