HVAC, Plumbing and Electrical in Detroit

Completed Gold Furnace Inspection on 10+ year old forced air system located in customer's basement. Performed comprehensive maintenance service according to Gold package specifications. Documentation photos were taken but image quality was insufficient to properly capture equipment condition details.

Conducted inspection of water leak originating from shower/bath fixture that was causing damage to kitchen ceiling below. Documented significant ceiling damage with visible corrosion on exposed pipes and water staining. Provided estimate for complete replacement of bathroom fixtures including showerhead, faucet, and spout to resolve the ongoing leak issue.

Responded to emergency gas leak call after DTE had shut off gas service. Performed comprehensive inspection of the 6-year-old gas system in basement, focusing on connection points and valves. Located and repaired leak at exterior wall junction where gas line enters building, replacing deteriorated fittings and pressure regulator. System tested and verified safe for operation, allowing for gas service restoration.

Diagnosed and repaired water leak from shower control handle in basement bathroom, which was causing issues with both hot and cold water flow regulation. Replaced faulty valve assembly and verified proper operation of new components with no further leakage observed during testing.

Conducted assessment for replacement of 50-year-old furnace located in basement. Inspected existing White-Rodgers thermostat and examined current HVAC infrastructure including insulated piping and ductwork. Documented condition of aging system to prepare comprehensive replacement estimate.

Responded to service call for a 3-month-old boiler exhibiting excessive steam and leakage from pipe onto basement floor. Inspection revealed severe corrosion on copper piping and deteriorated pipe insulation. Replaced damaged section of copper pipe and installed new insulation to resolve the leakage issue and prevent further water damage.

Responded to call for water leak from condensate pump in basement. Diagnosed issue as pump failure following power outage (indicated by flashing green light). Replaced condensate pump and verified proper operation of system, restoring normal drainage and preventing further water accumulation on basement tile floor.

Completed Gold Furnace Inspection on forced air system located in basement. Inspected burner assembly, confirming proper flame pattern with characteristic blue flames indicating complete combustion. Identified minor rust formation at exhaust connection point requiring monitoring, but system is currently operating within normal parameters.

Performed comprehensive Gold AC Inspection on customer's Lennox rooftop unit, documenting multiple areas of exterior panel damage with paint chipping exposing underlying material. System was thoroughly evaluated per maintenance protocol with all findings photographed for documentation purposes.

Responded to service call for non-functioning boiler with overfilled sight glass and leaking regulator valve. Diagnosed severe corrosion at copper pipe T-junction causing system failure. Replaced faulty VXT-24 Auto Feeder and repaired corroded piping connection to restore proper boiler operation and water level regulation.

Conducted estimate for furnace replacement of 25-year-old unit located in basement for returning customer. Inspection revealed aging ductwork system with galvanized metal ducting connected to rectangular plenum in structural space. Noted existing plumbing and utility infrastructure including copper supply lines and electrical wiring that will need to be considered during replacement.

Responded to callback for newly installed mini-split system displaying "High Discharge Pipe Control" error. Performed electrical diagnostics using Fluke clamp meter, measuring 6.9A current draw at junction box, and inspected fuse integrity. System was successfully restored to proper operation after electrical troubleshooting.

Conducted a full HVAC system estimate for AC installation in a home with an existing furnace unit. Evaluated the current 24"x18"x61" air handler/furnace in the basement mechanical room and assessed the ongoing drywall renovation areas for potential ductwork and system integration points. Measurements were documented and photos taken to develop a comprehensive installation proposal for the requested cooling system addition.

Performed diagnostic assessment on a newly installed 14kW Honeywell generator that customer reported was running excessively. Inspection of control panel (SYNC 3.0) confirmed unit was in "STOPPED - AUTO" mode with proper indicator lights functioning. Verified generator installation parameters and explained normal operational cycles to customer, confirming the unit was functioning as designed.

Responded to service call for basement flooding and steam boiler not reaching proper temperature. Inspected system components including control module, gas lines, and wiring connections. Determined transformer failure; replacement part will be available at shop tomorrow by 2:30.

Responded to service call for recently repaired 5-month-old boiler that was completely non-operational. Conducted diagnostic inspection of electrical components, identifying faulty wiring connections at the transformer module. Repaired damaged wire connections and restored proper functionality to the system.

Performed diagnostic assessment on non-operational humidifier installed in 2020. Inspected system components including water supply valve and connection to HVAC system. Identified and resolved humidifier functionality issue, restoring proper operation.

Responded to a warranty recall for a 5-month old furnace not producing heat. Inspected electrical connections at junction box and identified loose wiring connections. Secured all wire nuts properly and verified proper voltage to unit. Tested system operation after repair and confirmed furnace is now functioning correctly with proper heat output.

Inspected existing boiler and confirmed presence of carbon monoxide due to cracked heat exchanger, creating an unsafe condition requiring immediate replacement. Documented current installation conditions including existing plumbing connections and floor transition areas. Recommended full replacement of compromised boiler unit to restore safe heating operation and eliminate carbon monoxide hazard.

Performed seasonal tune-up on 2-3 year old HVAC system located in basement. Inspected and tested humidifier, thermostat, and hot water tank components. Examined plumbing fixtures and brass valve assembly, noting normal operation with some mineral buildup on valve cap that does not affect functionality.