HVAC, Plumbing and Electrical in Detroit

Responded to a basement toilet backup and discovered significant corrosion on copper supply lines with active leaks. Upon inspection, found deteriorating wall panels near the plumbing installation with visible water damage to surrounding wooden floor. Cleared drain blockage, replaced corroded copper pipes, installed new shut-off valves, and applied snake bites to repair leaking sections in both toilet and shower plumbing systems.

Diagnosed non-operational furnace over 15 years old that was not turning on. Discovered dirty filter was causing airflow restriction and replaced with new filter to restore proper system function. Performed complete system test to verify normal operation and proper heating.

Conducted site assessment for replacement of 20-year-old basement furnace and installation of new central air conditioning system in single-family residence currently without AC. Evaluated existing ductwork, noting galvanized metal ducts with visible connecting joints and some rust at wall penetrations. Inspection revealed exposed structural elements requiring consideration during installation planning.

Completed Gold Furnace Inspection on a 3-year-old furnace located in the basement. System was operational with no issues identified; thermostat functioning properly at 71°F with 32% battery life remaining. Visual inspection of connected water heater and associated plumbing infrastructure revealed normal conditions with minor aging on water supply lines.

Diagnosed and repaired 20-year-old furnace with no heat issue in basement location. Inspection revealed failed ignition system despite recent igniter replacement; installed new flame sensor and control board to restore proper ignition sequence and system functionality. Unit now operating within manufacturer specifications with all safety systems verified.

Successfully completed a two-day mini-split installation, including mounting the indoor air handler unit on the wall with proper PVC line set connections. Installed and configured the wall-mounted remote control/thermostat for system operation. System was fully tested and is functioning as designed.

Responded to a service call for disintegrated pipe connected to the boiler system. Upon inspection, identified and replaced the compromised section of pipe in the basement utility area, which showed severe deterioration compromising system integrity. Installed new fittings and connections to ensure proper function and prevent future leaks, restoring full operational capacity to the home's plumbing and heating system.

Diagnosed 17-year-old furnace with no heat issue despite unit powering on. Inspection revealed faulty control board with visible circuit damage and improper flame sensor operation. Replaced control board and verified proper ignition sequence and heat output, restoring normal system operation.

Responded to a service call for gas leak investigation after DTE detection. Performed comprehensive pressure testing of gas lines in basement utility area, identifying two separate leak points in the copper gas piping system. Inspected exposed plumbing infrastructure with particular attention to pipe joints and connections where turquoise/teal markings were present on the aged copper lines.

Responded to homeowner's report of burst pipe connected to hot water boiler. Inspection revealed severe corrosion and deterioration of ceiling pipes in basement, with significant water damage evident from leaking. Primary issue identified was a completely failed pipe section with advanced rust damage, causing water to leak onto surrounding structure and creating extensive staining on ceiling and walls.

Responded to service call for intermittent operation of wall-mounted tankless water heater. Diagnosed issue by inspecting internal components including heat exchanger, circuit board, and ventilation assembly. Performed maintenance on flow sensor and cleaned scale buildup in water lines that was causing inconsistent operation. System now functioning properly with stable hot water delivery.

Successfully installed a 40-gallon water heater in basement utility area. Completed standard reconnection of copper supply lines, metal vent pipe with insulation, and drainage pipe. Installation includes all necessary safety components and proper ventilation per manufacturer specifications.

Performed comprehensive inspection of failed 15-year-old furnace, documenting multiple critical issues including cracked heat exchanger, seized inducer motor, oil-leaking blower motor, and accumulated debris on electrical components. Evaluated associated 2004 air conditioning system. Prepared detailed replacement estimate for complete furnace and AC system upgrade based on assessment findings.

Successfully installed a 70,000 BTU Lennox furnace with proper mechanical and electrical connections. Installed a new liner and reconnected the existing ductwork system. Equipment was properly mounted and all safety components verified for optimal operation.

Responded to water leak service call for kitchen faucet that had been leaking for approximately 1.5 weeks. Upon arrival, confirmed water had been shut off to the fixture. Diagnosed and repaired the leaking kitchen faucet, which is a brushed nickel/stainless steel model with tall curved neck and single lever handle. Tested operation after repair to ensure proper function with no further leakage.

Conducted a site assessment for a potential Unico AC system installation in a historical home, inspecting the existing electrical infrastructure including the main breaker panel and junction box. Photos documented the current electrical setup, revealing aged wiring and potential upgrade requirements to support the high-velocity HVAC system requested by the homeowner.

Responded to no-heat call for a 15-year-old furnace that had completely ceased operation. Diagnostic inspection revealed significant corrosion and degradation on the heat exchanger, with visible damage to the surrounding electrical components. Replaced the damaged components and restored system functionality after thorough testing.

Diagnosed furnace ignition failure. Identified failed inducer motor as root cause. Ordered replacement motor from Dakota Supply (PO: 1292940-001). Confirmed proper flame pattern across burner tubes once system was temporarily operational for testing.

Responded to service call for a Rheem Performance water heater leaking from the bottom in basement location. Diagnostic inspection confirmed tank failure after approximately 10+ years of service, evidenced by water pooling on concrete floor. Recommended full replacement of unit due to age and irreparable tank deterioration.

Responded to no-heat call for 2016 furnace that was making loud noise before shutdown. Diagnosed failed inducer motor assembly causing operational failure. Replaced inducer motor, tested system functionality through complete heating cycle, and verified proper airflow through ductwork. System now functioning within manufacturer specifications.