HVAC, Plumbing and Electrical in Detroit

Responded to leaking main waterline in basement of century-old residential property. Upon inspection, identified active leak at vertical pipe penetration point where main water supply line emerges from basement floor. The compromised section exhibited deteriorated insulation wrapping and visible water seepage around pipe-to-floor junction. Shut off water supply at main gate valve near meter assembly to stop active leak. Assessed copper piping system and water meter installation mounted on concrete block foundation wall. Documented existing conditions including aged plumbing infrastructure, corroded pipe coverings, and water damage to surrounding concrete floor area. Recommended complete replacement of affected main line section due to age-related deterioration and potential for future failure in adjacent piping.

Performed seasonal air conditioning system start-up for Lennox condensing unit with basement evaporator coil installation. Labeled electrical circuit breaker for AC/furnace system in main panel for proper identification. Noted unit requires releveling with pea gravel pad adjustment on return visit to ensure proper drainage and equipment stability.

Completed Gold AC Inspection on a 6-year-old residential air conditioning system with air handler located in basement and condenser unit positioned on exterior pad adjacent to deck. Performed comprehensive visual inspection of outdoor condenser unit, verified operational status of fan assembly and protective grille, assessed unit placement and clearances, and documented equipment condition through photographic records. System found to be operational with homeowner confirmation of proper cooling performance.

Responded to no hot water complaint following recent home renovation. Investigated plumbing configuration and identified improperly installed water lines preventing hot water delivery to specific areas of the residence. Verified water temperature at fixtures using digital thermometer, confirming hot water supply reaching only 120.8°F at affected bathroom tub/shower location. Documented fixture installation and temperature readings. Explained findings to customer regarding incorrect water line routing from renovation work that requires correction to restore proper hot water distribution throughout the home.

Completed comprehensive Gold AC inspection on a single-unit residential HVAC system with equipment exceeding 10 years of age. Evaluated operational air handler/coil unit located in basement mechanical room, documented existing furnace installation with visible duct repairs and sealing work, and assessed electrical panel connections and service capacity. Equipment was confirmed operational at time of inspection, and photographic documentation was captured for replacement estimate preparation.

Responded to a returning customer's upstairs bathroom with a clogged toilet and slow-draining bathtub that had been problematic for two days. Upon arrival, assessed the 50-60 year old home's plumbing system and identified drainage issues affecting both fixtures. Successfully cleared the blockages in the toilet and bathtub drain line, restoring proper water flow and drainage function to both fixtures.

Coordinated with municipal water shutdown to perform comprehensive plumbing system upgrade. Replaced outdated galvanized piping with PEX re-pipe installation throughout the residence, secured to ceiling joists with proper mounting clamps in basement area. Rebuilt water meter assembly to code specifications. Replaced shower valve and trim assembly, installing new chrome control fixture with decorative escutcheon plate that coordinates with existing tile work in the shower enclosure. Installed new frost-free hose bib exterior fixture. All connections pressure tested and verified for proper operation before restoring water service.

Completed three-day mini split system installation in residential property, including all necessary mechanical and electrical work with new dedicated circuit. Obtained required permits for mechanical, electrical, and mini split components, with indoor wall-mounted unit professionally installed in living area corner with proper refrigerant line routing and condensate drainage. All installation documentation and financing paperwork processed and submitted for final approval.

Completed comprehensive Gold AC inspection on 10+ year old Bryant air conditioning system with air handler located in basement. Performed full system evaluation including outdoor condenser unit examination, verified proper equipment operation, and documented unit condition through photographic records. System found to be functioning properly at time of inspection with condenser unit showing normal weathering consistent with age, protective grilles intact, and all components operational.

Conducted site assessment for air conditioning unit installation in basement mechanical room where previous unit had been removed. Evaluated existing HVAC infrastructure including furnace, humidifier, ductwork connections, and available space for new AC equipment. Documented current system configuration and prepared installation estimate for replacement air conditioning unit.

Conducted comprehensive site assessment for HVAC system replacement at residential property. Documented existing exterior electrical infrastructure including meter box, junction panels, and conduit routing on brick exterior wall to ensure proper coordination with new HVAC equipment installation. Evaluated interior basement area conditions, noting unfinished walls with moisture concerns and existing utility routing that will require consideration during equipment placement and ductwork installation.

Responded to upstairs bathroom plumbing issues including a dripping showerhead and leaking toilet seal. Replaced faulty showerhead cartridge and installed new wax ring seal at toilet base, correcting previous unsuccessful repair attempt. Both fixtures tested and confirmed leak-free upon completion, with all work performed without requiring electrical power.

Responded to no cooling complaint on 3-year-old AC system with history of multiple service issues. Inspected thermostat wiring at wall terminal to verify proper connections and diagnose potential wiring concerns from previous service. Examined RC, RH, Y, G, W/E, and C terminal connections, documented existing wire configuration with multiple conductors terminated at terminal blocks. Discussed options with customer for installing dedicated common wire to improve thermostat power supply and system reliability.

Completed comprehensive assessment of 30-year-old air conditioning system located at rear of residential property for full replacement estimate. Documented existing equipment condition, including exterior utility connections, electrical service configuration with meter and junction boxes, and current refrigerant line routing through foundation-mounted utility box. Photographed all relevant components including conduit pathways, drainage provisions, and existing mounting locations on brick foundation to ensure accurate replacement specifications and proper sizing for new system installation.

Responded to service call for electrical power installation to detached garage. Assessed existing electrical service at main residence, including meter box and service entrance configuration. Evaluated routing options for new circuit from main panel to garage structure, considering distance, load requirements, and code compliance for proper power distribution to the garage.

Completed comprehensive Gold AC inspection on 2016 residential air conditioning system with air handler located in basement. Performed thorough evaluation of outdoor condenser unit, confirming proper fan operation, motor functionality, and overall equipment condition. Condenser unit showed no signs of damage, rust, or unusual wear, with surrounding area clear of debris and adequate clearance maintained for proper airflow and system efficiency.

Responded to no cooling complaint on 2-year-old air conditioning system. Upon inspection, found dual capacitor failure preventing compressor operation while indoor blower continued to run normally. Replaced failed capacitors, verified proper electrical connections, and tested system operation. Unit restored to full cooling capacity with all components functioning within normal parameters.

Responded to no heat call for 12-year-old Utica MGB 170J hot water boiler. Upon inspection, found circulator pump had failed due to severe corrosion and mineral buildup on pump housing and associated fittings. Replaced defective circulator pump with new unit, including new isolation valves and copper connections. Tested system operation, confirmed proper water flow and heat distribution throughout zones. System restored to full operational status.

Installed a 40-gallon A.O. Smith tanked water heater in basement utility area with copper supply connections and proper venting configuration. Unit was positioned on concrete floor with all safety labels visible and accessible, red valve handles installed on water lines, and chimney liner assessment completed to ensure proper exhaust ventilation. All plumbing connections were secured and tested for leaks, with installation meeting local code requirements for residential water heating systems.

Completed full HVAC system installation including new Lennox outdoor condenser unit and indoor evaporator coil for rental property. Installed condenser on rubber pad against exterior brick wall with proper PVC condensate drainage and electrical connections. Indoor coil integrated with existing furnace system in basement with new refrigerant lines, ductwork connections, and gas line configuration. All components tested for proper operation, refrigerant charge verified, and system commissioned successfully. Permit obtained and installation completed per customer specifications.