HVAC, Plumbing and Electrical in Detroit

Completed on-site assessment for water valve installation at main water meter location. Evaluated existing plumbing configuration including current shut-off valves, piping assembly, and water circulation system with heat exchange component. Provided detailed estimate for installing new water meter valve to improve system accessibility and code compliance.

Performed estimate for residential ductless mini-split heat pump system with two units installed by non-professional, resulting in code violations and equipment failure. Assessed lower unit with suspected compressor failure as priority for replacement, while upper unit remains operational. Documented Pioneer brand outdoor condensers mounted on exterior wall with interconnecting refrigerant lines and drainage piping, identifying 3-year-old and less-than-1-year-old systems requiring remediation to meet code compliance.

Conducted furnace replacement estimate for a 32-year-old Lennox unit located in basement with failed inducer motor. Evaluated existing system and determined repair costs would approach replacement value given age and condition of equipment. Assessed installation requirements including existing ductwork configuration, basement accessibility, and current thermostat functionality to provide comprehensive replacement options for aging heating system.

Conducted on-site assessment for new mini-split installation at residential property currently without HVAC system. Evaluated placement requirements for three indoor air handling units across two floors, including one first-floor location and two second-floor locations. Inspected existing electrical infrastructure at main breaker panel to determine capacity and necessary electrical upgrades for multi-zone mini-split system installation.

Responded to a service call for a toilet leak in the bathroom. Upon inspection, removed the tank lid and found extensive rust staining and corrosion throughout the tank interior, affecting the flush valve assembly and metal mounting components. The water exhibited brownish discoloration indicating deteriorated internal parts and hard water deposits. Diagnosed the leak source related to compromised seals and corroded hardware within the tank mechanism. Assessed the overall condition of the fixture and provided recommendations for repair or replacement based on the severity of corrosion present in the flushing system components.

Responded to gas leak emergency where utility company had previously identified and disconnected a defective gas range connector at the stove location. Upon arrival, confirmed the gas line had been properly capped at the floor-level gas stub-out. Performed visual inspection of the disconnected flexible connector and verified the cap installation met code requirements. Inspected basement gas piping system to ensure no additional leaks were present in the distribution lines. Documented existing conditions with photographs showing the capped gas outlet with brass floor flange and yellow valve assembly, as well as the overhead gas distribution piping in the basement area. Advised on next steps for safe reconnection of gas appliance once approved replacement connector is obtained.

Responded to no-heat call for rooftop furnace unit over 10 years old. Upon inspection, diagnosed failed ignition system preventing unit from starting. Replaced faulty ignitor and tested system for proper operation, restoring heat to building.

Completed comprehensive tune-up inspection on 2021-2022 steam boiler system located in basement. Performed thorough evaluation of boiler operation, humidifier functionality, thermostat calibration, and hot water tank condition using diagnostic equipment to verify proper system performance and temperature readings. All components inspected and found operating within normal parameters.

Completed comprehensive Gold Furnace Inspection on 20-year-old unit located in basement. Performed thorough diagnostic testing of furnace components using calibration meter, inspected blower motor assembly, verified electrical connections and wiring integrity, and examined ductwork connections. Evaluated Carrier humidifier operation and mounting, checked thermostat functionality, and inspected hot water tank as part of the comprehensive maintenance protocol. All system components photographed and documented for service records.

Completed comprehensive gold-level furnace inspection on a 4-year-old Daikin unit located in the basement. Performed full system evaluation including visual inspection of heat exchanger, burner assembly, and venting components. Verified proper ignition sequence and observed clean, even flame pattern across all four burners with appropriate blue flame characteristics indicating optimal combustion. Inspected blower motor operation, checked air filter condition, and examined all electrical connections for safety and proper function. Tested thermostat communication and confirmed system cycling properly. Documented equipment condition with photographs showing furnace installation, ductwork connections, and active burner operation. All components operating within manufacturer specifications with no immediate service needs identified.

Installed black expanded metal mesh security cage enclosure for outdoor HVAC air conditioning unit on concrete pad adjacent to residential foundation. Cage features rectangular configuration with perforated mesh panels, flat top design, and access door panel to allow equipment servicing while providing protection and airflow. Unit positioned on metal legs next to blue-gray sided house with proper clearances maintained from foundation and glass block windows for adequate ventilation and code compliance.

Responded to no-heat call where furnace was cycling on but not delivering warm air through vents. Upon arrival, found thermostat calling for heat with a 11-degree temperature differential (62°F actual vs 73°F setpoint). Inspected furnace unit and determined system was experiencing ignition failure or flame sensor malfunction preventing burner operation. Diagnosed issue, performed necessary repairs to restore heating function, and verified proper system operation with adequate airflow through supply vents.

Responded to customer report of boiler leak suspected at heat exchanger. Conducted thorough inspection of existing boiler system in basement utility area. Confirmed significant corrosion and deterioration on boiler components, with visible rust and patina indicating advanced equipment failure. Assessed plumbing connections, copper piping, and associated mechanical components. Documented current system condition with photographs showing extent of corrosion damage. Provided professional recommendation for boiler replacement and prepared detailed estimate for new boiler installation based on inspection findings.

Conducted on-site evaluation and generated replacement estimate for non-operational central air conditioning unit and aging furnace system. Assessed exterior condenser unit showing significant weathering and potential mechanical failure, along with basement-located furnace equipment. Documented existing system conditions through photographic evidence, noting deteriorated outdoor unit placement, overgrown surrounding area, and accumulated debris near foundation. Provided comprehensive replacement recommendations for both heating and cooling equipment to restore full HVAC system functionality.

Completed callback service for basement toilet bubbling issue following previous floor break and excavation work. Inspected sump pit installation and drainage system components to verify proper operation after recent repair work. Documented completed installation with photos showing finished concrete floor opening, drainage basin, and associated plumbing fixtures in working condition.

Performed complimentary furnace inspection on Tempstar unit located in basement mechanical room. Inspected humidifier feed tube orifice as requested and identified leaking water pump on 10-year-old humidifier assembly. System remains operational with heating and cooling functions unaffected. Documented equipment condition with photos showing active burner operation and internal components. Recommended humidifier pump replacement to prevent further water leakage.

Conducted comprehensive assessment of residential boiler system exceeding 75 years of service life in basement mechanical room. Documented existing Peerless brand unit showing significant age-related deterioration, including extensive surface corrosion, rust streaking on cabinet panels, and compromised structural integrity of metal casing. Noted disconnected expansion tank with visible markings indicating non-operational status, along with aged copper piping exhibiting oxidation and outdated electrical connections requiring replacement. Provided detailed photographic documentation and recommended complete boiler system replacement due to equipment age, safety concerns, and inefficiency of existing installation.

Completed installation of 2.5 ton A/C system with evaporator coil, including rear discharge configuration and line set reconnection. Mechanical, electrical, and air conditioning permits were requested and installation was performed per manufacturer specifications, with all equipment properly labeled and documented.

Responded to service call for water leaking from pipe in kitchen ceiling. Upon arrival, accessed plumbing infrastructure through existing wall opening at floor level. Identified source of leak in vertical copper supply line system serving kitchen fixtures above. Inspected two copper supply pipes with existing shut-off valves and central drain stack running through wall cavity. Evaluated valve integrity, pipe connections, and surrounding plumbing components for damage or deterioration. Created access point through drywall to expose affected plumbing for proper diagnosis and repair. Installed or verified operation of brass shut-off valves with red handles on both hot and cold water supply lines to isolate affected section. Addressed leak issue and restored water service to kitchen area. Documented conditions with photographs showing exposed copper supply lines, PVC drain stack, wall framing, and installed shut-off valve assembly for homeowner records.

Completed estimate for replacement of existing furnace and air conditioning system. Current equipment is over 10 years old, located in basement, and currently operational but homeowner requested pricing for full system replacement. Assessed electrical panel, equipment location, and site conditions to provide comprehensive replacement quote.