Local Plumber, Electrician and HVAC in Livonia, MI

Returned to property for follow-up drain clearing service on kitchen double-basin sink using extended 40-foot drain snake as requested by initial technician. Successfully cleared blockage that required longer reach equipment to properly address the clog beyond the capacity of standard tooling used during previous visit.

Completed comprehensive Gold AC inspection on a 4-year-old residential air conditioning system with basement-located air handler. Performed multi-point inspection of outdoor condenser unit, verified proper operation of all components, checked refrigerant levels, inspected electrical connections, and assessed overall system performance. Unit found operating within normal parameters with no immediate service needs identified.

Responded to recurring kitchen sink clog in 1960s-era home with double-basin stainless steel sink and PVC P-trap configuration. Cleared obstruction from drain line and inspected under-sink plumbing assembly, noting existing water staining on cabinet interior indicating potential previous leak history. Advised customer on preventive maintenance given repeat occurrence within one-week timeframe and recommended monitoring drain performance closely due to age of home's plumbing system.

Responded to leaking tub faucet causing water intrusion from bathroom into basement area below. Upon arrival, confirmed active leak with water pooling in pan beneath affected area. Accessed plumbing cavity through wall opening to expose vertical supply lines and drain configuration. Inspection revealed significant water damage to surrounding materials, including mold growth on wall surfaces and deterioration of structural components from prolonged moisture exposure. Identified compromised faucet valve assembly as primary leak source affecting copper supply lines serving tub fixtures. Removed defective faucet components and assessed condition of existing plumbing connections within wall cavity. Addressed corroded pipe fittings and replaced faulty valve mechanisms to restore proper water flow control. Verified all supply line connections for secure sealing and tested system under pressure to confirm leak elimination. Documented extensive water damage present in wall cavity and basement c

Completed Gold AC Inspection on a 4-year-old Daikin air conditioning system with air handler located in basement. Performed comprehensive multi-point inspection of outdoor condensing unit and indoor components, verified proper system operation, and provided complimentary air filter replacement per Gold maintenance plan specifications.

Conducted on-site assessment for HVAC system replacement estimate involving aging equipment. Evaluated existing 28-year-old furnace located in basement and outdoor air conditioning unit. Documented current system configuration including Emerson digital thermostat, existing ductwork, and equipment placement. Photographed equipment conditions and provided comprehensive replacement recommendations for complete furnace and AC combo unit installation.

Completed Gold AC Inspection on 10-year-old Bryant air conditioning system with air handler located in basement. Unit operational at time of service. Inspected outdoor condenser unit, which showed signs of dirt accumulation and biological growth on condenser coils requiring attention for optimal efficiency. Documented equipment condition through photographic records showing external components and coil condition. System confirmed operational with single-zone configuration serving residence.

Completed cooling maintenance tune-up on 8-year-old residential air conditioning system. Upon arrival, customer reported unit not cooling completely despite system operation. Performed comprehensive AC tune-up including visual inspection of outdoor condenser unit, tested capacitor with digital multimeter which revealed faulty readings requiring replacement. Capacitor ordered and will be installed upon arrival to restore optimal system performance and cooling capacity.

Completed comprehensive Gold AC inspection on 9-year-old residential air conditioning system with air handler located in basement and condenser unit positioned on exterior concrete pad. Performed thorough multi-point inspection including visual assessment of indoor furnace/air handler unit with associated ductwork and outdoor condensing unit. Verified system operational status, examined electrical connections at outdoor disconnect, inspected refrigerant lines, and assessed overall equipment condition. Checked condenser coil cleanliness, confirmed proper clearances around outdoor unit, and evaluated air handler cabinet and duct connections in basement mechanical room. Documented equipment specifications and manufacturer labeling on both indoor and outdoor components. System found to be operational with no immediate service concerns identified during inspection. Homeowner requested filter replacement and humidifier pad replacement as part of routine maintenance service.

Completed comprehensive Gold AC Inspection on a 10-month-old residential air conditioning system with air handler located in basement. Performed thorough evaluation of outdoor condenser unit, which was found to be in excellent condition with clean exterior surfaces, no visible damage or deterioration, and proper refrigerant line connections. Verified unit operation, inspected electrical connections, checked refrigerant lines for proper insulation and secure mounting, and confirmed condenser is properly positioned on concrete pad with adequate clearance for airflow through louvered ventilation panels.

Conducted on-site consultation and assessment for complete HVAC system replacement, evaluating existing 31-year-old air conditioning unit located on left side of property and current furnace system. Performed comprehensive inspection of basement mechanical room, documenting existing air handler configuration, ductwork layout, and available installation space for new equipment. Provided detailed estimate for full system upgrade including new outdoor condensing unit and furnace installation to replace aging equipment nearing end of service life.

Completed comprehensive Gold AC inspection on a 3-year-old Daikin condensing unit located on exterior pad with air handler in basement. Performed full system evaluation including electrical connections at disconnect box, refrigerant levels, condenser coil cleaning, and operational testing of all components. Unit found to be operating within manufacturer specifications with no immediate concerns noted.

Replaced obsolete 40-amp Pushamatic circuit breaker in main electrical panel. The outdated Pushamatic breaker was removed and a modern, code-compliant 40-amp circuit breaker was installed to ensure safe and reliable electrical service. All connections were properly torqued, panel labeled accordingly, and system tested to verify proper operation.

Performed commercial HVAC maintenance agreement service on single rooftop unit. Accessed RTU electrical control cabinet and inspected all electrical components, contactors, relays, and wiring connections. Verified proper operation of control systems and compressor components. Replaced air filters with new Koch brand pleated media filters installed in metal filter rack housing. All electrical connections found secure with no visible signs of wear or damage. Unit operational and system performing within normal parameters upon completion of maintenance inspection.

Completed spring HVAC maintenance on a residential system less than five years old, including basement furnace inspection and outdoor condensing unit servicing. Performed comprehensive tune-up procedures on both heating and cooling components, verified proper operation of all equipment, and documented system condition with photographs. All equipment found operating within normal parameters with no immediate service needs identified.

Responded to no cooling call on 17-year-old air conditioning system located in basement. Unit would not restart after shutting off during night, with amber indicator light remaining illuminated. Upon inspection, diagnosed failed control board as cause of system lockout. Control board showed signs of age-related component failure, preventing proper system operation and communication with compressor and blower components. Documented existing equipment condition including control board wiring connections, capacitor assembly, and refrigerant line configuration for service records.

Completed on-site assessment for heating system replacement estimate. Evaluated existing 10-year-old furnace located in basement with exposed ceiling joists and existing ductwork infrastructure. Documented current HVAC equipment including exterior condensing unit and interior mechanical systems, photographed installation area and accessibility for future replacement work.

Conducted comprehensive HVAC replacement estimate for 20-year-old air conditioning system experiencing low refrigerant levels and inadequate cooling performance. Upon inspection of the basement-installed equipment, determined that repair costs would be prohibitively high given the age and condition of the existing system, with visible dust accumulation and wear on components. Provided detailed replacement options and specifications for new high-efficiency system to restore proper cooling capacity and improve overall system performance.

Completed comprehensive Gold AC Inspection on 6-year-old furnace and air conditioning system with coil located in basement. Performed thorough inspection of gas furnace combustion chamber, verified proper burner operation with clean blue flames across all three burners, and inspected gas supply lines and electrical connections. Evaluated outdoor condensing unit positioned on concrete pad, checked refrigerant lines, and assessed overall system performance and component condition. All equipment found operating within normal parameters with no immediate service needs identified.

Responded to no-cooling complaint on 3-4 year old air conditioning system. Upon arrival, inspected unit and electrical connections in attic space. Found multiple wire splices with wire nuts in junction area that required evaluation. Assessed system for reported refrigerant leak concerns stemming from previous repair work. Documented wiring configuration and attic installation conditions with photos for further diagnostic review.