
Your home features many different systems, appliances, and units that all need to work well every day. When a problem arises, who will you turn to for help? Count on Flame Heating, Cooling, Plumbing & Electrical for home services in Livonia.
Our team of trained experts knows their work inside and out. We can clean a drain just as easily as rewiring a bedroom. From electrical panel upgrades to condenser coil repairs, we do it all. Discover what countless satisfied customers already know — FLAME can handle any job.
For HVAC, plumbing, and electrical services in Livonia, look no further than FLAME. Call (586) 217-2512 now to get started.
HVAC Services We Offer
You need a proper HVAC system to keep your home comfortable all year. Count on us when you need heating or cooling services in Livonia.
Heating Services
Keeping your Livonia home warm in the winter is a big task, especially when the cold and snow hit hard. FLAME provides services for furnaces, boilers, and heat pumps. Look to us for:
- Heating repair: Our team can inspect your system, find the cause of the issue, and perform the correct repair.
- Heating installation: We can remove your old, dying heating unit and replace it with a new system made to last.
- Heating maintenance: Our team can inspect every part of your heater, ensuring the system runs at peak performance.
Cooling Services
Maintaining a comfortable space during summers in Livonia, MI requires a good cooling system. At FLAME, we offer comprehensive cooling services for central AC systems and ductless mini-splits. Depend on our team for:
- Air conditioner repair: If your AC blows warm air or makes odd sounds, look to FLAME for help.
- Air conditioner installation: Don’t rely on a dying AC unit when our team can swap it with a brand-name replacement.
- Air conditioner maintenance: Annual maintenance can catch and resolve small issues, helping extend the life of your system.
Plumbing in Livonia
Your plumbing is essential for a sanitary home. Don’t ignore a clogged drain or lack of water pressure when FLAME is here to help.
Our team of expert plumbers offers sewer and drain services, pipe repair, water heater services, sump pump services, and more for homes in Livonia. From small fixes to major replacements, count on us.
Schedule the plumbing services you need most by calling FLAME at (586) 217-2512.
Electrical in Livonia
The electrical system in your home is vital to countless other systems. Make sure you have proper electrical systems in place with help from FLAME. We offer generator, panel, surge protection, lighting, and wiring services. Our team also provides commercial electrical services.
Keep your property powered up consistently and safely. Call FLAME at (586) 217-2512 to request electrical services in Livonia.
Why Choose FLAME?
Since 1949, FLAME has been resolving all types of heating, cooling, plumbing, and electrical issues in the Livonia area. Our licensed and insured technicians provide same-day service, expertise on each assignment, and respect for your home. Count on us for financing, specials, free estimates, and expert work.
Speak with FLAME today by calling (586) 217-2512 to schedule the services you need for your Livonia home.
Recent Jobs and Reviews in Livonia , MI
Job Locations and Reviews
Completed comprehensive Gold AC inspection on 2024 model year outdoor condensing unit at single-family residence. System operational at time of service. Performed full visual inspection of exterior condensing unit, including examination of cabinet condition, condenser coil cleanliness, and refrigerant line insulation integrity. Noted minor debris accumulation around unit base and light dust buildup on condenser fins, typical for outdoor installation. All components functioning within normal parameters with no immediate service needs identified.
Completed comprehensive Gold AC inspection on a 10-year-old residential air conditioning system. Unit confirmed operational at time of service. Performed thorough examination of outdoor condenser unit positioned against building exterior, noting standard wear consistent with age. Inspected electrical components including capacitor, wiring connections, and terminal blocks within unit compartment. All color-coded wiring and electrical connections verified secure and properly configured. Condenser unit exterior housing and fan grille inspected with no significant damage observed. Unit mounted on appropriate base pad with proper clearance from landscaping. Refrigerant lines and electrical conduit connections checked for integrity. System components photographed for service records.
Completed full-day electrical installation and repair work in commercial space with exposed framing and drop ceiling. Installed electrical switch and wiring in wall section with exposed studs, ensuring proper mounting and connection. Addressed lighting system by installing or servicing recessed fluorescent troffer fixture in acoustic tile ceiling, verifying proper operation and illumination levels throughout the space.
Completed comprehensive Gold AC inspection on multi-unit residential HVAC system with 10-year-old equipment, including two outdoor condenser units and basement-located air handler. Performed electrical diagnostics using clamp meter to verify proper amperage draw and voltage readings on both condensers, inspected condenser coils through protective grilles, evaluated unit housings for wear and weathering, and confirmed both systems operational. All equipment functioning within normal parameters at time of inspection.
Completed comprehensive Gold AC inspection on 2-year-old Lennox system with air handler located in laundry room. Inspected outdoor condenser unit, noting dirt and debris accumulation on coil fins requiring attention, verified system operational status, and documented equipment condition through photographic records. Unit confirmed functioning properly with homeowner present, condenser positioned on proper pad with adequate clearance from structure.
Returned to complete chimney liner installation that was deferred from winter HVAC system install. Replaced existing thermostat with customer's original unit per homeowner request, ensuring proper wiring connections and system compatibility with the Lennox furnace.
Completed comprehensive Gold maintenance inspection on 10-year-old Bryant forced air furnace system located in basement. Performed thorough examination of blower motor assembly, electrical connections, and condensate drainage components. Inspected exterior condenser unit mounted on concrete pad, verified proper clearances from structure, and confirmed operational status of all system components. All wiring connections, including diagnostic leads, were examined for proper termination and insulation integrity. Unit found to be in good working condition with no immediate service needs identified.
Completed comprehensive Gold AC inspection on single Daikin condensing unit with air handler located on lower level. Performed thorough system evaluation including visual inspection of outdoor condenser unit positioned on concrete pad with proper rubber isolation mounting, verified electrical disconnect box and conduit connections, assessed refrigerant lines, checked fan assembly operation through protective grille, and confirmed adequate clearance around unit perimeter. System found to be in proper working order with no immediate service needs identified; unit under 10 years old and operating within normal parameters.
Completed installation and reconnection of green boiler system with associated hydronic piping network, including copper distribution lines, red circulator pump, brass fittings, and expansion tank. Integrated Squire indirect water heater into system with proper piping connections and blue insulation on supply lines. Verified thermostat operation, checked all boiler functions, and ensured proper system startup after mechanical permit approval and reconnection work.
Completed comprehensive Gold AC Inspection on a 2-year-old residential air conditioning system with air handler located in basement. Performed full system evaluation of outdoor condensing unit and indoor components, verified proper operation of all equipment, and documented system condition through photographic records. Unit found to be in good working order with condenser area clear of debris and all components functioning within normal parameters.
Completed comprehensive Gold AC Inspection on 8-year-old residential air conditioning system with outdoor condenser unit and basement-located air handler. Performed full system evaluation including visual inspection of condenser unit positioned on composite pad against exterior brick wall, verified proper clearances around unit with adequate airflow access, inspected electrical connections and refrigerant lines, and assessed overall equipment condition. Confirmed system operational status and documented equipment specifications for maintenance records.
Conducted site assessment for new boiler installation to replace 30-year-old unit located in garage mechanical space. Documented existing system configuration including aged boiler with extensive copper piping, multiple zone valves, expansion tank, and manifold connections. Noted significant water damage and deterioration on interior cabinet wall surfaces, corroded substrate material, and general wear throughout mechanical space indicating end-of-life system conditions requiring complete replacement.
Completed preventative maintenance tune-up on a 6-year-old Bryant air conditioning system with outdoor condenser unit and basement-located air handler. Performed comprehensive system inspection including electrical connections, refrigerant levels, condenser coil cleaning, fan motor operation, and airflow verification. Unit found to be operating within normal parameters with no immediate service needs identified.
Completed comprehensive Gold AC inspection on 13-year-old Bryant air conditioning system with air handler located in basement. Performed thorough evaluation of outdoor condenser unit, including inspection of compressor, fan motor operation, and electrical components. Examined capacitor specifications (370/440VAC, 85+5 MFD) and verified proper electrical connections, noting age-related wear and minor surface oxidation on capacitor housing consistent with unit age. Confirmed condenser unit positioned properly on platform with adequate clearance, PVC condensate line routing appropriately, and surrounding area clear of debris. Assessed overall system operation and component condition, documenting equipment status through photographic records for maintenance history.
Completed comprehensive HVAC system assessment for full system replacement estimate in residential property. Evaluated existing mechanical infrastructure including ductwork configuration, piping systems, and equipment accessibility in basement and attic spaces. Documented current system layout with multiple utility intersections including HVAC ductwork, plumbing lines, and electrical conduits to determine optimal equipment placement and installation requirements for new system proposal.
Completed annual cooling maintenance tune-up on 9-year-old Comfortmaker system as part of prepaid membership agreement. Performed comprehensive inspection of outdoor condenser unit, changed furnace filter, and replaced humidifier filter. System operating properly with no issues found during inspection.
Completed Gold AC Inspection on a 3-year-old residential air conditioning system with air handler located in basement. Performed comprehensive maintenance including visual inspection of outdoor condensing unit with electrical components accessed and evaluated, verified proper system operation, and confirmed unit functionality. All components found operating within normal parameters with no service issues identified at time of inspection.
Completed AC system startup for basement evaporator coil installation. Verified proper refrigerant line connections with appropriate insulation materials secured at outdoor condensing unit. Inspected electrical connections, control board wiring, and component operation. System tested and confirmed operational.
Conducted a no-charge second opinion site visit to reassess and modify original plumbing estimate. Evaluated existing piping configuration in basement area including brass T-junction valve assembly with compression fittings, black flexible tubing connections, and PVC components installed among exposed floor joists. Documented current conditions and reviewed additional copper piping, ductwork, and utility routing in ceiling space to provide revised estimate incorporating requested modifications to original scope of work.
Performed scheduled commercial HVAC maintenance on rooftop RTU unit per service agreement. Accessed unit with ladder, inspected internal components including wiring, capacitors, and air handler assembly, documented equipment condition with photos. Coordinated filter replacement with facility to be completed under existing purchase order.