HVAC, Plumber and Electrician in Oak Park, MI

# HVAC Tune-Up Completed Performed comprehensive preventive maintenance tune-up on basement-located air conditioning system over 10 years old. Inspected evaporator coil, blower assembly, and all accessible components within the air handler unit. Evaluated condensate drainage system and identified absence of proper drain line from condenser unit and lack of secondary drain pan for overflow protection. Documented existing conditions showing dust accumulation on interior components and wear patterns consistent with equipment age. Cleaned accessible surfaces, checked electrical connections, and verified proper airflow through ventilation system. Recommended installation of condensate drain line and drain pan to prevent potential water damage and ensure code compliance for continued safe operation of the cooling system.

Completed comprehensive maintenance service on residential HVAC system including AC tune-up on 2018 outdoor condenser unit and preventive maintenance on 2019 Briggs and Stratton 12KW standby generator. Performed standard inspection procedures on both units, verified operational status of two-unit system with air handler located in basement, and confirmed all equipment functioning properly. Renewed membership plans onsite and documented service with photographic records of outdoor condenser unit positioned on concrete pad adjacent to brick foundation.

Completed annual cooling maintenance on a 16-year-old Bryant air conditioning system. Performed comprehensive tune-up including inspection of condenser unit, verification of proper leveling, cleaning of fan guard and coil assembly, and testing of all system components. System confirmed operational and functioning properly with no issues identified.

Responded to no-cool complaint on 5-year-old central air conditioning system. Upon inspection, determined outdoor fan motor was inoperative while compressor was running, resulting in inadequate heat rejection and reduced cooling capacity. Accessed outdoor unit control panel and diagnosed failed contactor preventing power delivery to condenser fan motor. Replaced defective contactor, verified proper electrical connections, and tested system operation. Unit now cooling properly with outdoor fan running at correct speed and full system functionality restored.

Conducted comprehensive assessment of existing heating and cooling system in residential utility closet for complete HVAC replacement estimate. Evaluated current natural gas furnace and air conditioning equipment configuration, including condensate drain assembly with PVC drainage lines, copper refrigerant lines with foam insulation showing frost accumulation indicative of temperature differential, and galvanized ductwork distribution system. Documented mechanical space conditions including water heater proximity, available clearances for new equipment installation, and utility area access constraints. Photographed existing system components, refrigerant line insulation condition, condensate management setup, and overall equipment layout to provide accurate replacement specifications for small residential application up to 1500 square feet.

Completed Gold AC Inspection on 8-year-old residential air conditioning system. Performed comprehensive evaluation of outdoor condensing unit, verified operational status of all components, and documented equipment condition with photographic records. Air handler/coil location in basement was confirmed, and system was found to be functioning properly at time of inspection.

# HVAC System Evaluation and Estimate Responded to service call for non-functional air conditioning system requiring full replacement assessment. Upon arrival, conducted comprehensive evaluation of existing HVAC installation located in confined utility closet space. Inspected current gray sheet metal air handler unit with connected flexible aluminum ductwork featuring S-shaped configuration. Noted existing system components including return air ductwork, wall-mounted return air grille, and electrical control wiring. Performed thorough assessment of equipment condition, documenting significant dust and dirt accumulation on galvanized steel air handler exterior surfaces indicating extended operational use. Examined flexible ductwork connections, refrigerant line routing, and overall system configuration within tight installation space. Evaluated structural constraints of mechanical closet for replacement equipment specifications. Photographed existing installation showing air handler

Completed comprehensive Gold AC Inspection and preventive maintenance on outdoor residential air conditioning system. Performed multi-point inspection including refrigerant line evaluation, condenser coil cleaning, fan motor operation verification, electrical connection testing, and amperage readings. All refrigerant lines with foam insulation showed proper installation with normal condensation present; brass valves and connections inspected and found secure. Condenser unit housing, fan assembly, and protective wire guard examined and confirmed in good working condition. System operating within manufacturer specifications with no deficiencies noted at time of service.

Completed routine tune-up on 7-year-old Goodman furnace located in basement. Performed comprehensive inspection of all system components, verified proper operation of blower motor, heat exchanger, ignition system, and gas valve. System found to be operating within normal parameters with no deficiencies noted; no repairs required at this time.

Provided comprehensive estimate for complete HVAC system replacement at residential property with 40+ year old air conditioning unit currently located in basement. Assessed existing natural gas furnace and air conditioning equipment, evaluated electrical service connections and metering infrastructure at exterior brick wall, and documented site conditions to develop replacement specifications for new heating and cooling system.

Replaced suction line and filter drier on residential air conditioning system. Both components were removed and taken to shop for proper disposal and documentation, with new parts installed to restore proper refrigerant flow and system protection.

Responded to callback for water leak issue on 10+ year old AC system located in basement. Upon arrival after 3 PM, inspected air handler and condensate drainage system where water accumulation had been reported on top of furnace. Used digital multimeter to perform electrical diagnostics and verify system operation. Tested capacitor functionality to ensure proper compressor and fan motor operation. Examined ductwork connections and air handler cabinet for signs of condensation or drain line blockage. Photographed HVAC installation including ductwork configuration and electrical components for documentation purposes. Addressed water leakage concern and cleared system for operation after completing diagnostics and necessary repairs to condensate management system.

Completed installation of new air conditioning system and evaporator coil in residential utility room. System was properly connected to existing York furnace, all refrigerant lines and ductwork were installed per manufacturer specifications, and electrical connections were completed. Unit was tested for proper operation, permit was requested for the installation, and customer payment was processed in full.

Responded to leaking shower knobs and faucet in main floor bathroom shower-tub combo unit. Upon inspection, accessed plumbing components through wall cavity to assess deteriorated fixtures in 1955-era installation. Evaluated three-handle chrome valve assembly mounted above tub spout showing signs of internal seal failure causing active leak for 2-3 days. Examined condition of supply lines and drain assembly through access point, noting significant age-related wear on mechanical systems. Documented existing pink tile surround and beige tub configuration with original plumbing hardware. Identified source of water seepage at valve stems requiring replacement of internal cartridges or complete valve body assembly to restore proper function and eliminate leaking condition.

Responded to no-cooling call for central air conditioning system. Upon arrival, found outdoor condensing unit completely inoperative with no power to the unit. Inspected electrical service and discovered tripped breaker at the main panel. Reset breaker and verified proper voltage supply to disconnect box. Outdoor unit restored to operation with compressor and condenser fan motor running normally. System tested and confirmed cooling cycle functioning properly.

Completed AC system start-up and verification on basement air handler installation with evaporator coil. Performed operational testing of new equipment, confirmed proper function of APCO air purification system with active LED display, and verified all drainage piping connections and condensate line routing. System operating within manufacturer specifications with all components functioning correctly.

Responded to service call for 6-year-old AC unit continuously running without reaching setpoint temperature. Performed comprehensive system diagnostics using digital manifold gauges and airflow measurements on R410A system. Testing revealed critically low refrigerant charge with suction and liquid line pressures both reading -61.3 PSIG, indicating significant refrigerant loss. System showed minimal temperature split of 0.7°F across evaporator coil and negative dehumidification capacity, confirming insufficient refrigerant for proper operation. Located and inspected refrigerant lines at outdoor unit, noting copper-to-PVC transition points and insulated sections. System requires refrigerant leak detection, repair of leak source, evacuation, and proper recharge to manufacturer specifications to restore cooling capacity and prevent compressor damage from continued operation in low-charge condition.

Responded to service call for water accumulation on top of basement furnace unit. Upon arrival, found 10+ year old furnace/air handler with moisture present, which had caused system shutdown. Utilized borescope inspection camera to examine internal ductwork and plenum areas for source of water intrusion. Inspected drain lines, evaporator coil drain pan, and surrounding HVAC components to identify leak origin. Documented findings with photographic evidence and provided recommendations for necessary repairs to resolve moisture issue and restore safe system operation.

Conducted on-site evaluation of a non-functioning 12-year-old residential air conditioning system for replacement estimate. Assessed existing outdoor condensing unit positioned on side of home, documented current equipment condition and installation location including electrical disconnect and service access. Provided comprehensive replacement options for whole-house cooling system based on equipment age and operational failure.

Responded to service call for blank thermostat display on Lennox forced air heating system located in basement. Diagnosed non-functional thermostat and replaced existing unit with WiFi-enabled programmable thermostat, ensuring proper leveling and wiring connections. Replaced HVAC system air filter and verified proper system operation upon completion.