Detroit Service Overview
● Local Priority: Fast response times across all Detroit neighborhoods, from Corktown to Palmer Woods.
● Certified Expertise: Licensed professionals expertly handling historic home retrofits and modern system upgrades since 1949.
● Efficiency Focus: Enhancing airflow, electrical safety, and system sizing for Detroit’s aging housing stock.
Detroit stretches from Eight Mile down to the Detroit River, with major corridors like Woodward Avenue, I-75, and I-94 carrying traffic through every part of the city. With more than 300,000 homes and an average home age of around 75 years, FLAME Heating, Cooling, Plumbing & Electrical handles hundreds of service calls across Detroit every year.
If you need help today, call (586) 217-2512 to schedule fast, local service.
A Longstanding Presence in Detroit
Since 1949, FLAME has been part of Detroit’s story. In a city where homes and infrastructure demand true expertise, our experience makes a difference. From the charm of Corktown and Indian Village to the bustle near the Ambassador Bridge and Belle Isle, we have seen it all. We know what’s behind the walls because we have been trusted to care for these homes for generations.
“Everyone was great to work with at Flame. Troy was quick to make an appointment, get a quote, and answer any questions. My furnace was replaced within 24 hours of initially contacting flame. They offer great pricing and financing options. The installation crew led by Jacob Little was respectful and efficient. Everything was done the right way and an extended labor warranty gives additional peace of mind. Highly recommend this team.”
Heating Services in Detroit, MI
Detroit winters show no mercy. As the cold settles in, aging furnaces and boilers in neighborhoods like Palmer Woods, Sherwood Forest, and the University District are put to the test. Many homes still depend on systems that have weathered decades of Michigan winters.
Our heating work in Detroit goes beyond quick fixes. We help homeowners breathe new life into old systems, boost airflow, and swap out tired units for ones that can truly keep up with the cold.
● Furnace repair and replacement
● Heat pump installation and repair
● System efficiency improvements
If your system is aging or leaves rooms chilly, consider a replacement instead of another round of repairs. Along Woodward Avenue and throughout the University District, many homes have older furnace retrofits that need expert sizing and airflow tweaks to work their best. Need heat in a hurry? Call (586) 217-2512 for same-day service anywhere in Detroit.
Cooling Services in Detroit, MI
Detroit summers bring sweltering heat and sticky humidity, especially near the river and in the heart of downtown. Many older homes weren’t built for central air, making comfort a real challenge.
We often install new AC systems in homes that once depended on window units or outdated equipment. In places like West Village and Hamtramck, we tackle tricky ductwork with creative, custom solutions. Along the riverfront and downtown, we frequently solve humidity and airflow issues during installations and upgrades, helping homes stay cool and comfortable all summer.
● New AC installation and replacement
If your home never seems cool enough or you juggle several window units, upgrading to a right-sized system can transform your comfort.
“Michael was absolutely delightful during his visit to maintain my HVAC system. He was polite, knowledgeable, friendly, and loved my pets. If I could have him every time, I’d be a happy lady. I also wanna put a shout out to the owner of the company because I was sick at the end of December and couldn’t respond to their reminders that my maintenance was due. Even though I missed the call in date, he accommodated me and kept me on the lifetime plan.”
Detroit Comfort & System Solutions
Problem: Aging heating systems failing during severe Detroit winters in historic neighborhoods.
Solution: Professional furnace retrofits, boiler upgrades, and system efficiency improvements tailored for older housing stock.
Problem: Lack of central air and tricky ductwork causing extreme summer discomfort.
Solution: Custom cooling options, including ductless mini-split systems and expert airflow upgrades.
Plumbing Services in Detroit, MI
Detroit’s plumbing often tells the story of the home’s age. Many properties still have old pipes and sewer lines that are vulnerable to leaks, backups, and corrosion.
From everyday repairs to complete system upgrades, we handle it all. In Detroit’s older neighborhoods, we often uncover problems that need more than a simple patch. In areas with aging sewer lines, we often find stubborn blockages and corrosion that call for more than just routine drain cleaning.
● Burst and frozen pipe repair
If you’re facing slow drains, frequent backups, or old pipes, it’s smart to get your system checked before a bigger problem pops up.
Electrical Services in Detroit, MI
Many Detroit homes need electrical updates, especially those built before today’s technology demands. Older wiring often struggles to keep up with modern appliances, devices, and HVAC systems.
Our electricians upgrade these systems to meet today’s standards, making your home safer and more reliable.
● Lighting
● Circuit breakers and electrical panels
● Smart home wiring and automation
If your home still has an old panel or you’re dealing with frequent breaker trips, it could be time for an upgrade.
“I recently had a new furnace and hot water tank installed and couldn’t be happier with the experience. Chris and his team were professional, courteous, and respectful of my home. They arrived on time, worked efficiently, and explained everything clearly before leaving. The installation went smoothly, and the furnace is running great.”
Why Detroit Homeowners Choose FLAME
Living in Detroit means your home faces unique challenges: older systems, historic architecture, and the city’s tough climate. That’s why experience truly counts. FLAME is ready for Detroit’s high demand, but we never lose our personal touch. Most neighborhoods can count on same-day service and dependable support.
● Serving Detroit since 1949
● Fast response times across all neighborhoods
● Experienced, licensed technicians
● Strong warranties and financing options
● Full-service capabilities across HVAC, plumbing, and electrical
From Comerica Park and the Fox Theatre to the neighborhoods stretching along Eight Mile, our team is always ready to help.
Schedule Service in Detroit Today
If you live in Detroit and need help with your heating, cooling, plumbing, or electrical system, FLAME is ready to help. Whether you are dealing with an urgent repair or planning an upgrade, our team is equipped to handle it. Call (586) 217-2512 to schedule service or book online today. We serve neighborhoods across the entire city, from areas near Woodward Avenue to homes closer to the riverfront, and respond quickly when you need it most.
Detroit Services FAQs
How long do HVAC systems last?
Most systems last between 10 to 15 years but can quickly degrade over time, so it’s important to have regular professional inspections and maintenance done.
Are bigger AC systems better?
Not necessarily. It’s more important to match your AC to your home. If your AC is too big, it will short-cycle and not run long enough to properly eliminate humidity and drain water from your system.
Why are my drains constantly backing up in my older Detroit home?
Older Detroit homes often have aging sewer lines that are susceptible to tree root intrusion, corrosion, and structural damage. Regular drain cleaning and video inspections can identify the root cause of stubborn blockages and prevent major backups.
Do I need to upgrade my electrical panel?
If your home still has an older fuse box, you frequently experience tripped breakers, or you are planning to install modern appliances like an EV charger or a new HVAC system, an electrical panel upgrade is highly recommended to meet today’s safety standards.
Are ductless mini-splits a good option for historic homes?
Yes! Ductless mini-split systems are ideal for historic Detroit homes that lack the existing ductwork required for traditional central air. They provide efficient, targeted cooling and heating without the need to tear into walls or alter the home’s architecture.
Do I need a special permit to install a new HVAC system in Detroit?
Yes, the City of Detroit requires permits and inspections for new HVAC installations to ensure compliance with local safety and building codes. Our team handles all the necessary paperwork and coordination with the city’s Buildings, Safety Engineering, and Environmental Department so your installation meets all legal standards.
Are heat pumps effective in Detroit's cold winters?
Absolutely. Modern cold-climate heat pumps are engineered to run efficiently even in sub-zero temperatures. For many of Detroit’s older homes, a dual-fuel system—combining a heat pump with a high-efficiency gas furnace—offers the perfect balance of year-round comfort and energy savings.
Recent Jobs and Reviews in Detroit, MI
Detroit, MI at a glance
Flame Heating, Cooling, Plumbing, Electrical has completed 25 jobs in Detroit, MI in September 2026.
The most recent job was on September 22, 2026.
Job Locations and Reviews
Completed installation of 40-gallon tanked water heater in basement utility area. Reconnected all plumbing lines, electrical connections, and venting systems per manufacturer specifications and local code requirements. Unit tested and confirmed operational with proper temperature and pressure settings.
Responded to main drain blockage with cable retrieval and video inspection services. Upon arrival, accessed main sewer line through exterior cleanout access point visible in gravel surface area near structure. Successfully extracted previously lodged drain snake that had become stuck in the line during prior clearing attempt. Performed comprehensive camera inspection of main drain line to assess condition and verify complete removal of obstruction. Video documentation revealed no remaining foreign objects or significant line damage. Inspected interior plumbing connections and drainage system through bathroom access point, confirming proper flow restoration throughout the system. All extracted equipment and debris removed from property, cleanout secured, and drainage system returned to full operational status.
Responded to gas leak emergency where utility company had identified leak location and installed temporary repair. Performed comprehensive gas pressure test and leak detection inspection of natural gas piping system. Located active leak in gas line running through damaged wall section with exposed framing and deteriorated building materials. Assessed compromised gas line integrity in area showing significant structural damage and water intrusion issues. Documented leak location and surrounding conditions including exposed piping, damaged drywall, and compromised building envelope. Provided permanent repair solution to replace temporary utility company fix and restore safe gas service to property.
Responded to service call for leaking outdoor faucet. Upon inspection, located the hose bib supply line in the basement/crawlspace area and identified leak at valve connection point. Replaced faulty valve assembly and threaded fittings, ensuring proper seal and function. Tested system for proper operation and confirmed leak was resolved with no further water discharge.
Responded to service call for incorrectly routed wiring from dual meter boxes causing hot water heater malfunction. Upon inspection, identified crossed conductors in basement electrical panel affecting water heater circuit. Traced wiring from both meter boxes through conduit runs to panel, verified proper phasing and circuit assignments. Corrected wire routing at panel connections, ensuring proper hot and neutral conductor assignments to water heater circuit. Secured all wire connections with appropriate wire nuts, verified voltage at water heater terminals, and confirmed proper operation of unit upon restoration of power.
Completed commercial backflow preventer testing and inspection on device installed above water heater in mechanical room. Performed required testing procedures on backflow prevention assembly, documented results, and captured photographic evidence of equipment condition showing aging galvanized piping with surface corrosion and existing valve assembly. All necessary municipal paperwork was completed on-site per local jurisdiction requirements.
Completed routine tune-up and inspection on two 5-year-old gas furnace units located in basement. Performed visual inspection of burner assemblies on both units, confirmed proper ignition sequence and verified blue flame pattern indicating complete combustion. Inspected gas valve assemblies, heat exchanger components, flame sensors, and electrical connections for proper operation. All burners firing uniformly with no abnormalities detected. Both furnace units operating within normal parameters with no immediate service needs identified.
Provided estimate for replacement of non-operational 16-year-old natural gas boiler located in basement. Assessed existing hydronic heating system including circulation pump, zone valves, expansion tank, and interconnected copper and black iron piping network. Documented current equipment configuration and mechanical room layout to prepare comprehensive replacement proposal for new boiler system.
Completed gold-level furnace inspection on a 15-year-old steam boiler located in the basement. All system components were evaluated and found to be operational at the time of service. Documentation photos were captured showing the unit, associated piping, ductwork connections, and testing equipment used during the inspection process.
Conducted comprehensive assessment of basement-installed furnace system experiencing failure symptoms from previous winter, including intermittent clicking and startup issues. Upon inspection, determined existing unit was aged beyond economical repair with compromised internal components, deteriorated wiring connections, and worn blower assembly visible through access panel. Provided detailed estimate for complete furnace replacement including removal of existing green-cabinet unit, installation of new high-efficiency heating system, proper venting modifications, and integration with existing ductwork and air handler components. Documented current system configuration including copper refrigerant lines, metal supply grate, and flue pipe assembly to ensure accurate equipment sizing and compatibility for replacement installation.
Provided estimate for replacement of non-operational natural gas furnace located in basement. Current unit is over 20 years old and requires full replacement. Assessment included evaluation of existing ductwork configuration and basement installation requirements for new furnace system.
Completed installation of new handheld shower assembly with slide bar and flexible hose in bathtub/shower enclosure. Replaced bathroom sink fixture as requested by homeowner. All fixtures tested for proper water flow and verified leak-free operation upon completion.
Completed waterline repairs in basement utility area as specified in estimate. Worked with existing copper plumbing system and galvanized ductwork in mechanical room with white painted brick walls. Repairs addressed compromised waterline components, ensuring proper function and integrity of the residential plumbing infrastructure.
Responded to service call for 3-month-old AC system that would not turn off when thermostat was set to off position and was blowing warm air. Diagnosed faulty non-communicating RDS control board causing continuous blower operation and loss of cooling cycle control. Replaced defective control board with warranty replacement unit from shop inventory. Tested system operation through multiple cycles to verify proper thermostat communication, confirmed unit now responds correctly to all thermostat commands including off position, and validated proper cooling output and airflow operation.
Responded to callback for non-operational air conditioning system that had not run since installation. Performed comprehensive diagnostic evaluation of outdoor condensing unit and refrigerant system. Diagnostic testing revealed critically low refrigerant charge with subcooling readings of -32.5°F and -32.8°F, confirming insufficient refrigerant in system as previously indicated by third-party technician.
Responded to maintenance technician's findings of a leaking boiler system. Conducted on-site assessment and documented existing conditions including thermostat operation and mechanical infrastructure in basement area. Scheduled appointment required rescheduling to complete equipment evaluation and provide replacement recommendations.
Responded to service call for burning smell reported at multiple outlets throughout the home. Upon inspection, identified faulty duplex receptacle with signs of overheating and arcing at connection points. Removed defective outlet, verified wire integrity, and installed new tamper-resistant receptacle with proper wire terminations. Tested outlet for correct polarity, grounding, and secure mounting to ensure safe operation.
Responded to service call for flickering lights and aging electrical panel. Upon inspection, discovered severely corroded exterior service entrance with deteriorated weatherhead and compromised conduit connections showing extensive rust damage. Interior panels revealed animal nesting material contamination in upper breaker box, creating potential fire hazard and contributing to intermittent electrical issues. Cleaned debris from panel enclosure, inspected all breaker connections and bus bars for signs of overheating or loose connections. Documented multiple code violations including improper wire management and inadequate weather protection at service entrance. Recommended immediate replacement of exterior weatherhead assembly and service entrance components due to safety concerns. Advised scheduling complete panel upgrade to address aging infrastructure, eliminate flickering issues, and bring installation up to current electrical code standards.
Completed comprehensive whole home plumbing inspection at residential property. Homeowner requested evaluation of existing plumbing system and assessment for potential toilet additions and overall plumbing upgrades throughout the residence. Conducted thorough visual inspection of accessible plumbing components including water heater, supply lines, drainage systems, and distribution piping. Examined water heater installation in basement utility area, noting copper supply piping connections with shut-off valves at unit. Inspected mechanical space and attic areas where plumbing infrastructure is routed, including vertical drain stacks and horizontal supply runs. Evaluated condition of existing fixtures, water pressure, pipe materials, and overall system functionality. Assessed structural routing of plumbing lines through building framework and identified locations suitable for potential fixture additions. Documented current system configuration with photographic evidence showing water
Completed comprehensive tune-up on 19-year-old Lennox G61MP-48C-090-07 furnace unit. Performed full system inspection including heat exchanger examination using borescope camera, which revealed normal condensation patterns with no cracks or deterioration detected. Conducted standard maintenance procedures including filter inspection, burner cleaning and adjustment, blower motor lubrication, electrical connection verification, gas pressure testing, and combustion analysis to ensure safe and efficient operation for the heating season.
Completed comprehensive HVAC estimate for full system replacement including furnace, air conditioning unit, water heater, and chimney liner assessment. The existing water heater, originally installed in 2007, was found to be actively leaking and required immediate replacement. Evaluated the property's HVAC infrastructure, including exposed ductwork in the renovation area and existing electrical panel configuration in the utility space. Confirmed chimney liner requirements for proper venting of new equipment and provided detailed replacement estimate covering all necessary components for complete system upgrade.
Completed comprehensive Gold-level furnace inspection on a 1-year-old forced air unit located in basement. Verified all four gas burners igniting properly with clean blue flame pattern and confirmed proper operation of ignition system and control components. Performed combustion analysis testing revealing CO2 reading of 7.0%, O2 level of 8.7%, and combustion efficiency of 80.8% with stack temperature of 351.9°F. Conducted visual inspection of heat exchanger showing normal condition with no signs of cracks or deterioration. Checked all electrical connections, wiring, and safety controls for proper operation. System operating within manufacturer specifications with no deficiencies noted at time of inspection.
Responded to service call for furnace system in basement that was failing to operate properly, exhibiting clicking sounds after startup attempt. Upon inspection, identified failed capacitor as primary cause of system malfunction. Replaced defective capacitor with new component, tested system operation, and verified proper furnace ignition and heating cycle completion.
Responded to service call for generator experiencing intermittent shutdowns. Inspected control panel and documented current system conditions. Diagnosed faulty controller assembly requiring replacement; ordered ASSY CONTROLLER unit from Generac (PO# 1369681-002) with expected delivery for installation. Verified brown out kit availability at shop for potential installation during controller replacement to address power quality issues contributing to system shutdowns.
Completed fall maintenance tune-up on two 8-year-old Amana furnaces as part of annual preventive maintenance under membership plan. Performed comprehensive inspection of both units including burner assembly cleaning, heat exchanger inspection, blower motor lubrication, air filter replacement, thermostat calibration verification, safety control testing, and combustion analysis to ensure optimal efficiency and safe operation for the heating season.
