Heating and Cooling Flat Rock

Responded to service call for non-operational air conditioning system affecting entire residence. Upon arrival, located 14-year-old AC unit in basement area and outdoor condenser unit positioned on concrete pad against building exterior. Conducted comprehensive system evaluation and diagnostics to determine root cause of complete system failure. Inspection revealed critical safety issue: cracked heat exchanger identified during thorough examination of heating components. This condition poses potential carbon monoxide hazard and renders system unsafe for continued operation. Heat exchanger failure at this age is consistent with normal wear and equipment lifecycle expectations. Evaluated outdoor condenser unit positioned on exterior concrete pad. Noted vegetation growth around base of unit and general outdoor equipment condition. Assessed electrical connections, refrigerant lines, and condensate drainage routing along building foundation. Documented existing installation configuration

Responded to no cooling call on 14-year-old residential air conditioning system. Upon arrival, accessed outdoor condenser unit located on concrete pad against exterior brick wall. Performed visual inspection of outdoor unit and utilized inspection camera to examine indoor evaporator coil components in basement. System appeared to be older model with typical age-related wear. Documented equipment condition through photographs of both outdoor condenser unit and internal coil components for customer records. Completed diagnostic evaluation as requested under CWOW service agreement.

Responded to service call for leaking State Industries ProLine tanked water heater in mobile home installation, originally installed in 2018. Upon inspection, confirmed active leak at tank base with visible water damage and corrosion on copper piping connections. Noted absence of dedicated shut-off valve for water heater, requiring main water supply to home to be shut off for any service work. Documented warranty discrepancy between customer records indicating 10-year tank/5-year labor coverage and company records showing 6-year tank warranty. Photographed unit condition, piping connections, temperature and pressure relief valve assembly, and evidence of mineral deposits and copper oxidation on fittings. Tank installed in confined utility closet space with standard residential venting and plumbing connections. Recommended immediate attention due to active leak and lack of isolation valve for future service accessibility.

Provided estimate for complete furnace and air conditioning system replacement in basement installation. Existing 10+ year old natural gas heating and cooling equipment is non-operational and requires full system replacement. Assessment included evaluation of current electrical infrastructure, venting configuration with existing PVC exhaust system, and available space for new equipment installation adjacent to water heater and electrical panel.

Completed comprehensive Gold AC inspection on residential cooling system under 10 years old with air handler located in basement. System confirmed operational and functioning properly at time of inspection. Inspected indoor air handler unit, ductwork connections, and outdoor condenser unit positioned on pad against exterior brick wall. Evaluated condenser cabinet condition, fan assembly operation, refrigerant line set, and electrical disconnect. Documented equipment configuration including water heater and furnace in mechanical room. Advised customer to maintain clear area around outdoor condenser unit, removing any debris or animal waste to ensure proper airflow and system efficiency.

Completed comprehensive Gold AC Inspection on a 10+ year old residential air conditioning system with outdoor condenser unit and basement-located air handler. Performed thorough examination of condenser unit including inspection of cabinet condition, protective top grille, condenser coil fins, refrigerant line connections, and mounting pad stability. Unit found to be operational with normal weathering consistent with age, intact protective components, and condenser coils in reasonable condition without major deformation.

Conducted full system estimate for replacement of aging air conditioning unit and furnace. Performed comprehensive evaluation of existing HVAC equipment located in basement, including assessment of current air handler, ductwork configuration, and system accessibility. Documented equipment conditions through detailed photography, noting standard wear on metal ductwork components, existing filter housing setup, and proximity to water heater for clearance considerations. Evaluated attic-space ductwork including flexible and rigid metal elbows, main plenum assembly, and structural mounting points to determine compatibility with new system installation. Provided customer with complete replacement options for both cooling and heating equipment based on current system layout and infrastructure requirements.

Completed prepaid maintenance inspection on 3-year-old residential air conditioning system. Performed comprehensive evaluation of outdoor condenser unit, including visual inspection of refrigerant service valves, copper line sets with insulation, electrical connections, and condenser coil condition. Unit found operating within normal parameters with all components properly secured and functioning. Documented equipment condition with photographic records for maintenance history.

Completed comprehensive Gold AC inspection on outdoor condensing unit. Performed diagnostic testing using digital multimeter and temperature measurements, recording supply air temperature of 54°F and system voltage of 246.6V with amperage draw of 00.10A. Inspected 10-year-old evaporator coil located in basement, verified proper operation of condenser fan motor, and assessed overall system performance. All components found operating within normal parameters with no immediate service needs identified at this time.

Completed comprehensive Gold AC Inspection on 10-year-old residential air conditioning system with air handler located in basement. Performed electrical diagnostics using clamp meter, measuring voltage at 242.4-242.8V and amperage at 0.18A at outdoor condenser unit. Inspected condenser coils, fan assembly, capacitor, and all electrical connections for proper operation. Advised property owner that condenser area requires clearing of debris and animal waste for optimal system performance, and that additional inspection is scheduled for second property location.

Completed estimate for ductless mini-split system installation to provide heating and cooling for small residential property under 1500 square feet. Assessed three separate rooms for wall-mounted indoor air handler placement, including bedroom areas with adequate wall space and electrical access. Documented existing conditions and measured locations for outdoor condenser unit and refrigerant line routing to support three-zone ductless HVAC system configuration.

Installed ground fault circuit interrupter (GFI) outlet with weatherproof cover on exterior wall. Ran gray PVC conduit vertically along white vinyl siding to protect wiring from environmental exposure. Mounted outdoor-rated electrical box with clear hinged weatherproof cover to allow access while maintaining protection from moisture and weather elements. Verified proper grounding and tested GFI functionality to ensure compliance with electrical safety standards for outdoor receptacles.

Completed installation of 70,000 BTU furnace system with all mechanical and electrical reconnections. Obtained required mechanical, electrical, and furnace permits prior to installation. Installed and programmed White-Rodgers thermostat, verified proper system operation across all heating modes, and confirmed accurate temperature control and scheduling functions.

Responded to service call for non-operational furnace in basement mechanical room. Upon arrival, confirmed eight-year-old heating unit had completely failed and was not producing heat. Conducted thorough assessment of existing Bryant furnace system, including evaluation of ductwork connections, condensate drainage lines, and overall HVAC infrastructure. Documented current equipment configuration with existing water heater placement and utility corridor layout. Prepared comprehensive replacement estimate for new furnace installation, accounting for existing duct connections, PVC venting requirements, and proper clearances in mechanical room. Provided customer with detailed quote for complete furnace replacement to restore heating functionality to residence.

Provided comprehensive estimate for complete HVAC system replacement including air conditioning unit and natural gas furnace for 25-year-old equipment experiencing operational issues. Assessed existing basement-mounted furnace and outdoor condenser unit, documented current installation configuration including ductwork connections and electrical routing, and developed replacement specifications for new heating and cooling system.

Completed comprehensive HVAC tune-up on 8-year-old system including basement-located gas furnace and outdoor Bryant condenser unit. Performed thorough inspection of furnace burner assembly, confirmed proper blue flame combustion pattern, verified gas valve operation, and checked all electrical connections and wiring harnesses. Inspected outdoor condenser unit, verified refrigerant lines and insulation integrity, and confirmed proper unit placement on gravel pad. Additionally inspected and evaluated humidifier, thermostat functionality, and hot water tank as part of complete system assessment. All components found operating within normal parameters with no immediate service needs identified.