Local Plumber, Electrician and HVAC in Livonia, MI

Provided replacement estimate for 30-year-old air conditioning unit and 25-year-old natural gas furnace located in basement. Both systems currently operational but nearing end of service life. Assessed existing ductwork, plenum configuration, and utility connections to determine equipment specifications and installation requirements for complete HVAC system replacement.

Completed fall maintenance tune-up on a 3-year-old Laars JVT100NDIS boiler located in basement. Performed comprehensive inspection and combustion analysis using digital meter, confirming optimal system performance with proper oxygen and carbon monoxide levels. Unit operating within manufacturer specifications with no deficiencies noted.

Completed comprehensive gold-level furnace tune-up and winter preparation service on 23-year-old Bryant furnace system. Performed full system inspection revealing significant debris accumulation, including dried leaves lodged in exterior intake piping and insulated ductwork components. Utilized borescope inspection camera to conduct thorough internal examination of heat exchanger and combustion chamber, documenting system condition through detailed photographic evidence. Cleared all debris from intake pathways to ensure proper airflow and prevent potential system blockages. Verified all mechanical components, tested safety controls, and confirmed system is operating within manufacturer specifications and ready for heating season demands.

Completed comprehensive Gold Boiler Inspection on 21-year-old steam boiler system located in basement. Performed thorough visual examination of heat exchanger components, identifying moderate rust staining and corrosion on metal framework and piping connections. Inspected electrical components, motor assembly, and control wiring for proper connections and operational integrity. Documented equipment condition through photographic evidence showing age-related deterioration of heat exchange surfaces and general wear consistent with system age. All electrical connections, including multi-colored control wiring and terminal points, were verified for secure attachment. System confirmed operational at time of inspection.

Completed comprehensive HVAC tune-up on 7-year-old gas furnace located in basement. Performed full system inspection including burner assembly verification with all four pilot flames operating properly, gas valve and electrical connections check, blower motor assessment, thermostat functionality test, humidifier inspection, and hot water tank evaluation. All components found operating within normal parameters with no immediate service needs identified.

Completed Gold-level furnace inspection on 10+ year old forced air system located in basement. Performed comprehensive combustion analysis using Bacharach analyzer, confirming proper operation with CO2 reading of 7.3%, stack temperature of 97°F, ambient air temperature of 62.4°F, excess air at 55.6%, and CO reading of 53 ppm—all within acceptable parameters. Inspected horizontal air handler unit, associated ductwork, and plumbing connections, documenting equipment condition with photos for service records.

Provided estimate for replacement of non-functional 10+ year old boiler and radiator heating system serving second floor area. Existing equipment located in attic requires full system replacement to restore heating capability to upper level living space.

Performed scheduled filter change on commercial rooftop unit (RTU). Accessed roof-mounted packaged HVAC system and removed four heavily soiled pleated air filters showing significant dust accumulation and discoloration. Installed new replacement filters to restore proper airflow and system efficiency. Unit operational upon completion of service.

Completed comprehensive Gold Plan furnace maintenance and tune-up on a 5-year-old unit. Performed full system inspection including blower motor assembly, electrical connections, control boards, and all internal components. All wiring, mounting brackets, and mechanical systems verified to be in proper working condition with no issues identified.

Completed installation of 4-ton air conditioning unit with matching evaporator coil in right side yard location. Performed mechanical-only installation with system reconnection to existing ductwork and electrical. Verified system operation using digital manifold gauges, confirming proper refrigerant pressures, superheat, and subcooling readings within manufacturer specifications for optimal performance.

Responded to fifth callback for air conditioning system not cooling properly. Performed comprehensive diagnostic evaluation of entire HVAC system including inspection of attic-mounted equipment, ductwork integrity, and airflow pathways. Documented existing conditions with photos showing accessible equipment locations and system components for supervisory review and determination of corrective action plan.

Responded to customer complaint of air conditioning system blowing warm air. Evaluated 10+ year old cooling equipment located in basement, including air handler with finned coil assembly and associated ductwork connections. Inspected furnace/air handler unit, condensate drainage system with PVC piping, flexible and rigid ductwork transitions, and electrical connections. Documented existing HVAC system configuration and equipment condition through detailed assessment. Provided comprehensive replacement estimate for cooling system and recommended surge protector installation to protect new equipment from electrical damage.

Responded to no cooling complaint on 10+ year old air conditioning system located in basement. Upon inspection, found unit blowing warm air. Evaluated blower assembly and electrical connections, verifying proper operation of squirrel cage fan and motor components. Inspected wiring bundle at junction point, confirming all electrical connections were secure and properly terminated. System components showed normal wear consistent with age, with blower wheel in clean condition and no visible debris accumulation affecting airflow.

Completed comprehensive Gold-level furnace inspection on 6-year-old forced air unit located in basement. Performed full system diagnostic including combustion analysis, gas valve operation verification, electrical component testing, and safety control checks. Measured temperature differential and verified proper airflow throughout system. All components found operating within manufacturer specifications with no deficiencies noted. Additionally performed scheduled maintenance on 12KW Briggs and Stratton standby generator. Conducted operational testing, inspected electrical connections, verified automatic transfer switch functionality, and confirmed battery condition. Both heating system and generator are functioning properly and ready for continued service.

Responded to service call for water leaking from underneath a 4-year-old furnace located in basement. Upon inspection, identified condensate drainage issue causing water accumulation. Cleared condensate line obstruction, verified proper drainage flow, and tested system operation to ensure leak was resolved. Inspected surrounding area for water damage and confirmed furnace returned to normal operation without further leakage.

Responded to fourth callback following installation of 90K BTU furnace, 3.5-ton A/C system, and coil for inadequate cooling and thermostat temperature discrepancy. Addressed previous issues including system not turning on, insufficient airflow, and air leakage from furnace cabinet. Verified thermostat calibration and system operation, ensuring proper temperature readings and cooling performance to resolve ongoing concerns.

Responded to callback for 4-year-old AC system with ongoing cooling and dehumidification issues following two previous service visits where refrigerant adjustments and blower speed modifications were made. Conducted comprehensive system evaluation and documented thermostat readings showing 73°F room temperature with heating mode inadvertently active. Corrected thermostat programming, verified proper system operation in cooling mode, and escalated to field supervisor for review of previous refrigerant charge adjustments to ensure long-term resolution of humidity control concerns.

Responded to callback for reinspection of 6-year-old basement furnace following report of cracked heat exchanger from another company. Conducted thorough visual inspection of heat exchanger assembly, combustion chamber, and all accessible surfaces for cracks, corrosion, or structural defects. Upon detailed examination, no visible cracks or compromised areas were found in the heat exchanger. Verified system operation, monitored burner ignition sequence, flame characteristics, and combustion performance to ensure safe operation. All components functioning within normal parameters with no evidence of heat exchanger failure at this time.

Completed annual preventative maintenance inspection on 11-year-old Bryant furnace system located in basement as part of Gold Plan membership. Performed comprehensive visual inspection of all major components including heat exchanger, burner assembly, gas valve, and draft inducer motor. Verified proper ignition sequence and observed clean blue flame pattern across all burners, indicating optimal combustion. Inspected gas valve controls and associated wiring connections for proper operation and secure terminations. Examined blower motor assembly and draft inducer for signs of wear or deterioration. Removed and inspected air filter, noting diamond-pattern mesh design and checking for proper fit within black frame housing. Verified all electrical connections and control wiring throughout system showing appropriate color coding and secure connections. Checked ductwork connections and mounting brackets for stability. System operational testing confirmed all components functioning within nor

Completed comprehensive Gold AC Inspection on a 10+ year old single-unit system with air handler located in basement. Equipment was operational at time of service. Performed thorough multi-point inspection including visual assessment of air handler installation, refrigerant line insulation, condensate drainage system, and electrical connections. Verified proper PVC condensate drain routing and checked all accessible mechanical components. System found to be functioning within normal parameters. Documentation completed with photographic records of equipment installation and surrounding utility area.