HVAC, Plumber and Electrician in Oak Park, MI

Completed comprehensive Gold Plan furnace inspection on 9-year-old Coleman unit located in basement. Verified system operation, inspected all internal components including blower motor, heat exchanger, gas valve assembly, and electrical connections. Checked and confirmed proper function of integrated Aprilaire humidifier system with associated PVC drainage lines. All components found in good working condition with no immediate service needs identified. System operating within manufacturer specifications.

Responded to red-tagged gas leak on tanked water heater unit installed in 2023. Gas utility had identified and tagged leak at gas control valve assembly following initial service visit where no leak was detected. Upon arrival, confirmed gas leak at control valve unit under part warranty coverage. Removed existing white gas control valve assembly including pilot light mechanism, ignition system wiring, and brass gas line connections. Retrieved replacement gas valve from supplier under existing purchase order and installed new control valve assembly. Reconnected all gas piping, pilot assembly, ignition wiring, and thermostat controls. Performed leak test on all gas connections using approved testing solution to verify system integrity. Cycled unit through complete ignition sequence to confirm proper burner operation and flame sensor functionality. Verified temperature control operation and proper combustion chamber function. System restored to full operational status with no gas leaks de

Conducted complimentary estimate for replacement of 30-year-old natural gas furnace located in basement. Evaluated existing HVAC system including ductwork, electrical connections, refrigerant lines, and air handler configuration. Documented current equipment condition through photographs showing aged galvanized ductwork, metallic flex conduit, copper tubing, and existing furnace unit with associated mechanical connections. Provided replacement recommendations based on system assessment.

Responded to service call for basement plumbing issues involving rusty water from washtub pipes and toilet requiring resealing. Upon inspection, removed and replaced toilet wax ring seal at floor flange to eliminate leak and ensure proper seal between fixture and drain line. Cleaned flange area and surrounding tile, removing debris and preparing surface for reinstallation. Successfully reset toilet to flange with new wax ring, securing unit with bolts and testing for proper seal and function.

Completed comprehensive Gold furnace inspection on 4-year-old forced air unit located in basement. Performed full system evaluation including visual inspection of all mechanical components, piping connections, gas valve assembly, and electrical wiring. Installed new filters and humidifier pads as part of routine maintenance protocol, documented equipment condition with photos showing gas line connections and internal components in proper working order.

Performed comprehensive inspection of 10+ year old Lux brand forced air furnace system located in basement. Evaluated existing heating equipment condition, noting significant age-related wear on unit cabinet and connected ductwork with visible surface corrosion and discoloration on galvanized metal components. Assessed gas line connections, ductwork integrity, and overall system performance to provide replacement estimate recommendations for aging HVAC equipment.

Completed comprehensive furnace inspection and tune-up on forced air heating system located in basement. Inspected and verified proper operation of all system components, including burner assembly, heat exchanger, blower motor, and safety controls. Checked air filter condition, which appeared clean with minimal dust accumulation. Measured supply air temperature at 174.3°F, confirming proper heat output and combustion efficiency. All components operating within normal parameters for equipment of this age.

Completed comprehensive city certification inspection on 5-year-old HVAC system located in basement. Performed thorough tune-up including full system diagnostics, humidifier inspection and operation verification, thermostat calibration and function testing, and hot water tank safety inspection. All components found operating within normal parameters and meeting municipal code requirements for rental property certification.

Completed full HVAC system replacement including installation of 70,000 BTU furnace with humidifier and liner, 2.5-ton air conditioning unit positioned on left side of structure, and reconnection of existing electrical components. Obtained mechanical and electrical permits prior to installation. Applied for consumer rebate and processed financing documentation upon completion of work.

Conducted comprehensive full system evaluation of existing HVAC equipment including 15-20 year old furnace and drum-type humidifier located in basement. Assessed air handler unit, ductwork insulation, refrigerant lines, and electrical panel configuration to provide complete system upgrade recommendations. Documented current equipment condition and specifications to prepare detailed estimate for humidifier upgrade and potential full system replacement options.

Responded to service call for humidifier upgrade on 15-20 year old furnace system located in basement. Removed existing drum-type humidifier unit and assessed HVAC system condition. Upon inspection, noted significant rust deterioration on air handler housing and aging ductwork components. Upgraded to new humidifier system, ensuring proper integration with existing forced-air furnace. Verified all connections, tested humidifier operation, and confirmed proper airflow through system. System returned to full operational status with enhanced humidity control capability.

Performed comprehensive fall furnace tune-up on recently installed heating system with no reported operational issues. Conducted full Gold-level inspection including visual examination of internal components, gas valve assembly, electrical connections, blower motor, and all mechanical systems. Verified proper operation of all safety controls, confirmed adequate airflow, tested ignition sequence, and documented system condition with photographic records showing clean internal compartment and properly routed wiring connections.

Completed air conditioning reconnection service at property. Performed electrical wiring reconnection using proper wire connectors and conduit installation. Verified system operation by taking diagnostic readings with digital manifold gauge, confirming proper refrigerant pressures and temperatures across the system to ensure unit was functioning within manufacturer specifications.

Completed furnace inspection on 10+ year old heating unit located in attic space. Accessed equipment via ladder, performed visual examination of gas furnace components including burner assembly, heat exchanger, blower motor, and electrical connections. Observed pilot light operation and verified proper ignition sequence, documented internal components and wiring configuration for maintenance records.

Responded to service call for malfunctioning radiator steam control valve on 6-year-old steam boiler system located in basement. Upon arrival, wore protective shoe covers per customer request due to new carpeting. Inspected blue boiler unit and associated piping system, noting considerable corrosion and oxidation on copper piping and brass fittings throughout the installation. Examined steam distribution system including multiple vertical risers, control valves, and connections. Evaluated the problematic radiator valve controlling steam flow and assessed overall system condition. Documented equipment showing signs of age-related deterioration including corroded piping, worn insulation, and oxidized fittings. Photographed boiler unit with specification labels, sight glasses, control components, and surrounding mechanical connections for service records.

Responded to service call for leaking shower valve in vintage three-handle tub and shower configuration. Upon inspection, identified failed valve cartridge with significant mineral buildup, corroded O-rings, and worn seals causing water seepage. Shut off water supply, removed defective valve stem assembly from wall-mounted fixture, and documented heavy calcium deposits and deterioration on internal components. Replaced faulty cartridge with new unit, installed fresh O-rings and seals, reassembled valve assembly, and restored water supply. Tested all three handles for proper operation and verified complete elimination of leak.

Successfully completed installation of 2-ton air conditioning system with evaporator coil and 40-gallon standard water heater in rear utility room. All refrigerant lines, condensate drainage, and electrical connections were properly installed and tested. Mechanical and electrical permits were obtained prior to installation, and existing thermostat was upgraded to Sensi programmable unit. System was commissioned, verified for proper operation, and customer qualified for available utility rebates from Consumers Energy and DTE.

Responded to non-functioning kitchen outlets in vacant apartment unit. Upon arrival, accessed electrical panel in basement and performed circuit testing using digital outlet tester to diagnose the issue. Identified tripped GFCI circuit protecting kitchen outlet branch, reset breaker, and verified proper voltage and wiring configuration at all affected receptacles to restore full functionality.

Responded to no cooling call on 7-year-old residential air conditioning system located in basement. Upon arrival, confirmed unit was not powering on. Accessed outdoor condenser unit through narrow side yard passage with overgrown vegetation. Performed electrical diagnostics using multimeter at condenser unit, obtaining voltage readings of 204.2V and 22.1V at terminal connections. Identified power supply issue preventing compressor operation. Cleared access pathway of dried plant debris to ensure proper airflow around outdoor unit and facilitate future service access.

Completed comprehensive Gold Plan AC inspection on 1-year-old air conditioning unit and 3-year-old furnace system located in basement. Performed diagnostic measurements using calibrated testing equipment, verified proper electrical connections and wiring integrity, inspected gas valve assembly and copper refrigerant lines for signs of wear or corrosion, checked humidity control settings, and confirmed all system components are operating within manufacturer specifications. All equipment received approval status with documentation affixed to unit, and system is functioning properly with no immediate service needs identified.