Troy Service Overview
● Local Priority: Dedicated service for Troy neighborhoods and commercial corridors.
● Certified Expertise: Expert HVAC, electrical, and plumbing diagnostics and repair.
● Efficiency Focus: Maximizing home comfort and system longevity in aging homes.
Troy sits along I-75 and Big Beaver Road, with major corridors like Livernois, Rochester Road, and Coolidge running through one of Oakland County’s busiest residential and commercial areas. With more than 35,000 homes, many built around the 1970s, FLAME Heating, Cooling, Plumbing & Electrical handles a high volume of maintenance, upgrades, and system replacements across Troy every week.
We are in Troy homes daily, working in the same subdivisions and layouts again and again, which allows us to diagnose issues quickly and get them fixed the right way. If your system is not performing the way it should, call (586) 217-2512 now and get it checked before it turns into a larger and more expensive problem.
What Makes Troy Homes Different
Troy sits in a different category than many surrounding cities. Homes here are not dealing with the same level of wear you see in older areas, but they are also not new builds. Most systems have already been replaced once, sometimes twice, and are now reaching the stage where performance issues begin to show.
From homes near the Somerset Collection and the Big Beaver corridor to subdivisions near Beaver Trail and residential pockets off Rochester Road, we see consistent patterns. Airflow is often slightly off, systems are not always sized correctly for the home, and maintenance has not always kept up with demand. These are not emergency failures at first. They are slow performance declines that eventually lead to bigger issues if ignored.
“My mother had a furnace maintenance done and couldn’t be happier with the service. Michael was very knowledgeable and took the time to explain everything clearly and calmly. The inspection was thorough, and the furnace was left running efficiently.”
Expert Electrical Services in Troy
Electrical in Troy, MI
Electrical demand in Troy homes has increased significantly over the last decade. Homes that were originally designed for basic usage are now supporting high-efficiency HVAC systems, smart home devices, EV chargers, and additional appliances.
We regularly open panels in Troy homes and find they are close to capacity or outdated for current demand. This is especially common in homes built in the 1970s where the original panel has not been upgraded.
● Lighting
● Circuit breakers and electrical panels
● Smart home wiring and automation
Homes near Rochester Road and older subdivisions often have limited panel space and undersized wiring for modern usage. If breakers trip, lights dim, or you are planning to add new equipment, it is time to evaluate the system.
Need electrical work handled correctly the first time? Call (586) 217-2512 and we will get a technician out quickly.
Cooling in Troy, MI
Cooling your home in Troy through a humid Michigan summer requires a system that is properly sized and running at peak efficiency. With many homes in the area built in the 1970s and 1980s, we frequently see air conditioning units that have reached the end of their lifespan and are struggling to keep up with the demand.
Whether you live near the Somerset Collection or closer to the Stage Nature Center, common cooling issues in Troy include uneven temperatures between floors, weak airflow, and rising energy bills. These are often signs of aging equipment or ductwork that needs attention.
● Air conditioning repair and maintenance
● AC system replacement and installation
● Thermostat upgrades and smart home integration
● Indoor air quality solutions
If your AC is constantly running but your home still feels warm, do not wait for a complete breakdown. Call (586) 217-2512 to get a FLAME technician out to diagnose the issue correctly.
Heating in Troy, MI
Heating systems in Troy homes are typically in the mid-life stage. They still operate, but efficiency drops and performance becomes less consistent. This often shows up as uneven heating, longer run times, or higher utility bills.
We frequently see this in homes built around the 1970s where duct systems were not designed for modern efficiency standards. Returns are often undersized, which affects airflow throughout the home.
● Furnace repair and replacement
● Heat pump installation and repair
● System efficiency improvements
If your furnace runs constantly or struggles to maintain temperature, the issue is usually tied to system design or airflow, not just the equipment itself.
“Jeff Andrew’s, plumber from Flame Heating, was excellent. He handled a full laundry relocation and replaced outdated plumbing in the basement. He coordinated everything and followed through at every stage.”
Common Troy Household Challenges
Problem: Aging systems in 1970s Troy homes often suffer from undersized ductwork and outdated electrical panels, leading to poor airflow and insufficient power for modern smart appliances.
Solution: FLAME provides comprehensive diagnostics to optimize airflow, correctly size HVAC replacements, and upgrade electrical panels to safely handle today’s home energy demands.
Plumbing in Troy, MI
Plumbing systems in Troy are generally newer than in surrounding cities, but they still develop issues over time. Buildup in drain lines, worn fixtures, and aging water heaters are common as systems move past mid-life.
We often work in homes with finished basements or updated layouts where plumbing has been modified. These changes can create pressure inconsistencies or drainage issues if not done correctly.
● Burst and frozen pipe repair
Sump pumps are especially important in Troy due to finished basements. Even a small failure can lead to costly water damage. Regular checks and maintenance go a long way in preventing that.
“We have always had good experiences with FLAME technicians. They are respectful and professional. We had our central air and furnace replaced by them and everything has worked perfectly.”
Why Troy Homeowners Choose FLAME
Troy homeowners expect consistency, professionalism, and results. They are not looking for quick fixes. They want systems that run properly and reliably.
● Serving the area since 1949
● Working in Troy homes daily
● Same-day service available in most neighborhoods
● Clean, professional installations
● Technicians familiar with local home layouts
● Full-service support across HVAC, plumbing, and electrical
From the Somerset Collection area to neighborhoods near Stage Nature Center and throughout the Big Beaver corridor, we are already working in your area and understand the systems in these homes.
Schedule Service in Troy Today
If you are in Troy and something does not feel right with your system, it is better to address it now than wait for a breakdown. Small performance issues tend to turn into larger repairs if ignored. We can evaluate your system, explain what is happening, and give you clear options based on your home and your setup. Call (586) 217-2512 or schedule online today. Same-day appointments are available across most of Troy, and we are already working in neighborhoods near you.
Troy Home Services FAQ
Do you provide same-day HVAC service in Troy?
Yes, we offer same-day service appointments in most Troy neighborhoods for urgent heating and cooling repairs.
Can you upgrade my electrical panel?
Absolutely. Many homes in Troy built in the 1970s require panel upgrades to support modern smart home devices, EV chargers, and high-efficiency HVAC systems. We handle full panel replacements and rewiring.
Do you service and replace sump pumps?
Yes. Because many Troy homes have finished basements, a reliable sump pump is essential. We offer sump pump repair, replacement, and regular maintenance to prevent costly water damage.
Why is my 1970s Troy home experiencing uneven heating and cooling?
Many homes built during this era feature original ductwork designs that were not optimized for today’s high-efficiency systems. Undersized return vents and aging duct layouts often restrict airflow, causing hot and cold spots. A professional duct and airflow evaluation can identify exactly where modifications are needed.
How can I improve the indoor air quality of my Troy home?
Since modern homes are sealed tightly for energy efficiency, indoor air can trap allergens, dust, and humidity. We offer comprehensive indoor air quality solutions, including whole-home humidifiers, air purifiers, and UV light systems that integrate directly into your existing HVAC ductwork.
Recent Jobs and Reviews in Troy , MI
Troy, MI at a glance
Flame Heating, Cooling, Plumbing, Electrical has completed 20 jobs in Troy, MI in September 2026.
The most recent job was on September 30, 2026.
Flame Heating, Cooling, Plumbing, Electrical has completed 600 jobs in Troy, MI in the last 12 months.
Job Locations and Reviews
Completed Gold-level maintenance inspection on residential steam boiler system. Performed comprehensive visual examination of boiler components, associated piping, valves, and pressure controls. Inspected water heater, circulation system, pressure vessel, and all interconnected mechanical equipment in basement mechanical room. Noted visible corrosion and oxidation on multiple pipe sections and threaded fittings throughout the system, particularly on horizontal runs and valve connections. Documented condition of red-handled gate valves, pressure gauge, control box, and copper piping. System operational at time of inspection; photographed equipment conditions for maintenance records.
Performed comprehensive maintenance inspection on 22kW Generac standby generator as part of complimentary first-year service following installation. Conducted visual inspection of generator cabinet and internal components, verified proper operation of all control systems, and checked battery condition and charging system functionality. Inspected oil level and quality, examined air filter condition, and verified coolant levels in the engine cooling system. Tested automatic transfer switch operation and confirmed proper voltage output under simulated load conditions. Checked all electrical connections for tightness and signs of corrosion, inspected wiring harnesses and terminal blocks, and verified proper grounding. Examined exhaust system for leaks or deterioration and confirmed adequate ventilation clearances around unit. Reviewed control panel display for error codes or system alerts and documented run hours on the unit. All systems found to be operating within manufacturer specificat
Completed comprehensive tune-up and safety inspection on 6-year-old furnace system located in garage. Verified proper burner ignition and flame characteristics, inspected all electrical connections and wiring, checked blower motor operation, and evaluated heat exchanger condition. Performed full system diagnostics including humidifier functionality, thermostat calibration, and hot water tank assessment, confirming all components operating within manufacturer specifications.
Responded to a service call for a 6-year-old AC unit located in the basement. Successfully replaced a faulty dual-run capacitor (45/5µF, 370VAC) that was causing system performance issues. Verified all electrical connections, tested system operation, and confirmed proper functionality of the compressor and condenser fan motor upon completion.
Completed annual heating maintenance and tune-up on a Lennox WT 11-2030 furnace in preparation for the winter season. Performed comprehensive system inspection including gas valve assembly, electrical connections, safety controls, and pressure switches. Verified all components functioning properly with system operating as designed at time of service completion.
Responded to service call for reported furnace leak on 10+ year old forced air system located in basement. Upon inspection, discovered significant corrosion and rust staining on condensate drain line and equipment housing, indicating active water leakage from the condensate drainage system. The black PVC elbow connector showed evidence of moisture accumulation with visible water droplets on surrounding surfaces and extensive orange-brown rust deposits flowing down the white exterior panel of the furnace cabinet. Documented the deteriorated condition with photographs showing the corroded pipe connection point and resulting water damage to the equipment housing. The rust staining patterns and moisture presence confirmed ongoing condensate drainage issues requiring immediate attention to prevent further corrosion damage to the furnace cabinet and surrounding components.
Completed annual Gold Plan maintenance on a six-year-old residential gas furnace located in basement. Performed comprehensive tune-up inspection including verification of all electrical connections, control board operation, blower motor assembly, capacitor functionality, and condensate drain system. All components found operating within normal parameters with no issues identified; unit photographed and returned to service.
Completed full HVAC system installation including a 90,000 BTU high-efficiency furnace with humidifier and 2.5-ton rear-discharge air conditioning unit in basement mechanical room. Installed new Honeywell thermostat, ran electrical conduit and wiring to junction box, connected condensate drain lines, and integrated all ductwork connections. Secured mechanical, electrical, and plumbing permits prior to installation, performed all reconnections to existing infrastructure, tested system operation, and verified proper airflow and temperature control throughout residence.
Responded to a no-heat service call for a boiler system with a confirmed pipe leak that had been previously located by a leak detection specialist. Assessed the identified leak location and measured the affected piping to determine the appropriate repair materials and methodology required. Documented the pipe dimensions and leak site with photographic evidence to provide an accurate repair estimate for the necessary piping replacement or repair work.
Completed electrical estimate for generator installation at residential property with existing exterior electrical service panel mounted on brick wall. Assessed current utility meter configuration, main service disconnect, and electrical panel arrangement to determine feasibility and requirements for generator integration. Evaluated electrical service capacity and existing conduit routing for proper generator connection and automatic transfer switch placement. Provided comprehensive quote for hot water heater replacement, as existing unit has reached end of service life. Inspected current water heater installation including supply and drainage plumbing connections, shutoff valves, temperature and pressure relief valve discharge piping, and venting configuration. Documented existing plumbing layout featuring combination of copper, PVC, and flexible supply lines with multiple shutoff points. Assessed electrical or gas connections, clearance requirements, and code compliance consideratio
Completed comprehensive furnace inspection and tune-up on forced air heating system located in basement. System is less than 10 years old and operating within normal parameters. Performed visual inspection of all internal components including burner assembly, heat exchanger, gas valve, ignition system, and blower motor. All burner tubes showed proper flame characteristics with blue flame pattern indicating complete combustion. Verified gas connections and fittings for integrity; noted minor surface oxidation on some fittings which is typical for equipment age but does not affect operation. Inspected electrical components including control board, relays, and wiring connections. All connections secure with no signs of overheating or deterioration. Tested and verified proper operation of safety controls and limit switches. Blower motor assembly inspected and found in good working condition with normal operational sounds. Conducted airflow measurements using manometer, recording static
Replaced existing water heater due to significant corrosion around the dielectric fittings. Installed a 50-gallon Bradford White Defender Safety System standard tank water heater. Connected all copper supply lines and venting system to ensure proper operation and code compliance.
Completed Gold furnace inspection on 8-year-old Daikin forced air unit located in basement. Performed comprehensive system evaluation including visual inspection of internal components, electrical connections, and gas line connections. Verified proper operation of all safety controls and measured system performance parameters using diagnostic equipment. All components found to be functioning within normal operating specifications with no immediate service needs identified.
Performed comprehensive tune-up maintenance on a forced air furnace installed in 2021, located in the basement. Conducted thorough inspection of blower motor assembly, circulation pump, expansion tank, and associated piping systems. Verified proper operation of all mechanical components, checked electrical connections, and confirmed condensate pump and drainage system functionality. Customer enrolled in preventative maintenance membership program during service visit.
Completed complimentary tune-up service on a 15-year-old Bryant furnace located in basement as part of monthly membership plan. Performed standard maintenance procedures including inspection of burner assembly, heat exchanger, blower motor, and all safety controls. Assessed overall system condition and provided estimate for furnace and air conditioning replacement due to age of equipment approaching end of expected service life.
Completed comprehensive tune-up on residential furnace system located in basement. Unit is approximately 3-4 years old and appears to be in serviceable condition. Performed standard maintenance protocol including inspection of heat exchanger, burner assembly, and ignition components. Verified proper operation of blower motor and checked electrical connections. Inspected condensate drain lines and PVC piping for proper drainage. Evaluated ductwork connections and assessed overall system airflow. Documented equipment condition with photographic records showing HVAC unit installation area, ductwork configuration, and surrounding mechanical space. System operating within normal parameters following maintenance service. Provided estimates for additional equipment including air conditioning system and chimney cap installation as requested.
Completed comprehensive tune-up and inspection on 14-year-old Bryant furnace located in basement as part of Flame Monthly Autopay Membership plan. Performed standard maintenance procedures including filter inspection, burner assembly cleaning, and heat exchanger examination. Utilized inspection camera to conduct thorough internal assessment of heat exchanger and flue passages, documenting conditions with photographic evidence. Camera inspection revealed normal aging characteristics consistent with unit age, including minor surface oxidation on piping components and standard dust accumulation within ductwork connections. All burner components, gas valve operation, and ignition system functioning within normal parameters. Verified proper airflow, checked safety controls, and confirmed venting system integrity. Unit operating safely and efficiently with no immediate concerns identified.
Completed comprehensive fall tune-up and inspection on 2-year-old Lennox furnace located in basement as part of Gold maintenance plan. Performed full system diagnostics including blower motor assembly inspection, flame sensor evaluation, electrical connection verification, and heat exchanger examination. All internal components including ignition system, wiring harnesses, and safety controls found in excellent operational condition with no signs of wear or deterioration. Verified proper airflow, tested all safety switches, and confirmed system is heating efficiently and ready for winter season.
Completed comprehensive Gold furnace inspection on 9-year-old gas-fired heating system located in basement. Verified proper burner operation with blue flame combustion pattern and inspected gas valve assembly, electrical connections, and wiring harness. Performed diagnostic testing using digital multimeter to measure system temperatures and operational parameters. All components found operating within normal specifications with no immediate service needs identified.
Responded to condensate leak at air handler coupling in basement on one-month-old furnace and humidifier system. Inspected condensate drainage system, identified faulty coupling connection at air handler where leak had been active for approximately one week, and repaired/tightened coupling to eliminate water discharge. Verified proper condensate flow and confirmed system operating without further leakage.
Troy Local Services
Troy Heating Services
Troy Air Conditioning Services
Troy Plumbing Services
Troy Electrical Services
Troy Indoor Air Quality
