Heating and Cooling Bloomfield Township

Completed comprehensive Gold Boiler Inspection on a 16-year-old unit located in the garage. Performed thorough visual examination of the heat exchanger, blower assembly, electrical connections, and all associated components, verifying proper operation and documenting equipment condition with photographic records. All systems found to be functioning properly with no immediate service needs identified at time of inspection.

Completed two-day boiler installation including new unit, thermostat, and garage piping repairs. Installed new boiler system with associated ductwork and PVC venting configuration, connected copper supply lines, and repaired damaged piping in garage area. Mechanical and electrical permits were obtained, and all reconnections were completed per code requirements.

Responded to service call for 12-year-old steam boiler system with reported circulating pump failure and damaged radiator requiring replacement. Upon arrival, conducted comprehensive inspection of boiler unit located in closet, evaluating all mechanical components, piping connections, and circulation system. Assessed condition of existing circulator pump and verified operational status of heating distribution system. Performed thorough examination of radiator network to identify failed unit and determine extent of damage. Inspected all pipe connections, valves, and fittings throughout the system, noting areas of corrosion on copper piping and aging mechanical components. Evaluated boiler controls, expansion tank mounting, and associated plumbing infrastructure to ensure system integrity. Documented current system conditions including visible oxidation on metal components and wear patterns consistent with equipment age. Provided technical assessment and recommendations for circulator pu

Completed Gold-level furnace inspection on 3-4 year old gas furnace located in basement. Verified proper burner ignition and flame pattern with all burners operating correctly and producing consistent blue flames. Inspected gas valve assembly, electrical connections, and control wiring for secure terminations and proper voltage. Examined blower motor assembly and verified operational status. Checked condensate drainage system components including drain line and fittings. Observed minor dust accumulation in equipment compartment, which is normal for this age of equipment. All mechanical and electrical components functioning within manufacturer specifications. Unit operating safely and efficiently with no immediate service needs identified.

Completed Gold AC Inspection on outdoor condenser unit located on concrete pad adjacent to building exterior. Performed comprehensive system evaluation including visual inspection of condenser cabinet, fan grille assembly, and refrigerant line connections. Unit showed normal weathering consistent with outdoor installation, with surface staining and dirt accumulation noted on cabinet and surrounding pad area. Verified proper drainage, checked refrigerant line insulation integrity, and assessed overall equipment condition. All components found operational with no immediate service requirements identified during inspection.

Performed comprehensive tune-up on 1-year-old Lennox furnace system. Completed full system inspection of all mechanical and electrical components, verified proper operation of blower motor, heat exchanger, and control board connections. Installed new air filter per customer request due to homeowner requiring assistance with routine maintenance. All components operating within normal parameters with no issues identified.

Completed comprehensive tune-up on Bryant gas furnace located in basement. Performed standard maintenance protocol including inspection of burner assembly with confirmation of proper flame characteristics across all ports, checked gas pressure and connections, examined blower motor and electrical components, verified venting and condensate drainage systems, and tested all safety controls. Unit operational with burners firing evenly and all components functioning within manufacturer specifications at time of departure.

Responded to call for leaking water supply line between wall shut-off valve and toilet. Upon arrival, found corroded pipe connection at wall penetration with visible rust staining on surrounding tile and active leak at escutcheon. Shut off main water supply, removed deteriorated flexible supply line, and replaced with new braided stainless steel connector. Verified proper seal at wall connection and toilet tank inlet. Restored water supply and tested system under full pressure with no leaks detected.

Completed comprehensive Gold Furnace Inspection on a 2-year-old forced air heating system located in basement. Performed thorough examination of internal components including gas valve assembly, electrical connections, wiring harness, and all associated safety controls. All components inspected and found to be operating within normal parameters with proper wire connections secured and no deficiencies noted.

Completed comprehensive Gold furnace inspection on 7-year-old Daikin forced air unit located in basement. Inspected all internal components including blower motor assembly, electrical connections, control board terminals, and safety mechanisms. Unit found operating properly with all components functioning within normal parameters; no repairs required at this time.

Responded to same-day service request for cold water supply line repair beneath bathroom sink. Accessed plumbing system in unfinished basement area, inspected exposed copper piping and connections, and successfully repaired the compromised cold water line to restore proper water flow to the fixture above.

Responded to service call for water leaking from 10-year-old furnace located in basement. Upon inspection, identified condensate drainage issue causing water accumulation. Performed complete fall furnace maintenance and tune-up as requested, including inspection of heat exchanger, burner assembly, ignition system, and all safety controls. Replaced heavily soiled air filter which was restricting airflow and contributing to system inefficiency. Cleared condensate drain line, verified proper drainage, and tested all furnace operations to ensure unit was functioning safely and efficiently. System restored to proper working condition with no active leaks present at completion.

Responded to service call for 15-year-old residential air conditioning system located in attic that was blowing hot air. Upon inspection, diagnosed complete refrigerant loss in R-410A system, indicating system was flat with no remaining charge. Provided comprehensive estimate for full HVAC system replacement due to age of equipment and extent of refrigerant loss.

Responded to no cooling complaint on 15-year-old air conditioning unit located in attic. Upon arrival, confirmed system was running but discharging warm air instead of conditioned air. Performed diagnostic evaluation of outdoor condensing unit and indoor air handler. Inspected electrical connections at meter base and verified power supply to equipment. Assessed condenser unit exterior condition, noting age-related wear and outdoor exposure consistent with equipment age. Documented system configuration and current operating conditions with photographs for service records.

Completed installation of 2-ton Lennox air conditioning condenser unit and evaporator coil system. Positioned outdoor condenser unit in rear yard on composite pad against brick exterior wall with proper clearances maintained. Ran electrical conduit and wiring to wall-mounted disconnect box per code requirements. Installed Bryant evaporator coil in basement utility area integrated with existing furnace system. Performed system flush to remove contaminants from refrigerant lines. Connected refrigerant line set between outdoor condenser and indoor coil, evacuated system, and charged with proper refrigerant quantity per manufacturer specifications. Completed all electrical connections including reconnection of control wiring and power circuits. Secured all necessary mechanical and electrical permits prior to installation. Tested system operation including compressor function, airflow, temperature differential, and electrical draw to verify proper performance. System operating within manufa

Responded to urgent water leak call for six-year-old AC system located in attic. Upon arrival, inspected attic-mounted air handler and identified clogged condensate drain line causing water overflow and ceiling damage below unit. Cleared blockage from primary drain line, verified proper drainage flow, and tested secondary drain pan for integrity. System remained operational throughout service and was cooling properly. Recommended monitoring ceiling area for any additional moisture concerns and advised scheduling preventive maintenance to avoid future drainage issues.

Provided estimate for complete HVAC system replacement including non-operational air conditioning unit and natural gas furnace, both located in attic with condenser positioned on exterior concrete pad. Existing equipment exceeded 20-year service life and required full replacement to restore cooling and heating functionality. Documented current electrical service configuration including meter, disconnect panel, and conduit routing along exterior brick wall for proper system sizing and installation planning.

Performed comprehensive assessment of existing 10+ year old natural gas boiler located in basement for replacement estimate. Unit is currently operational but has reached end of expected service life. Evaluated existing infrastructure including galvanized and copper piping connections, PVC venting system, and electrical components to determine replacement specifications and any necessary modifications for new equipment installation.

Responded to no cooling complaint on 10+ year old AC unit located in basement. Upon arrival, found condensate pump not operating, preventing AC system from running due to safety float switch activation. Inspected GFCI-protected outlet supplying power to pump and discovered circuit had tripped. Reset GFCI receptacle, restored power to condensate pump, and verified proper pump operation and drainage. Tested AC system operation and confirmed unit cooling normally with proper airflow from indoor blower. Advised homeowner to monitor GFCI outlet for future trips, which may indicate pump motor drawing excessive current or potential ground fault condition requiring pump replacement.

Completed comprehensive Gold AC inspection on 10+ year old single-zone system with air handler located in basement. Performed thorough examination of outdoor condenser unit, verified proper operation of compressor, fan motor, and capacitor. Inspected electrical connections, contactors, and refrigerant lines for wear and integrity. Checked condenser coil fins for debris accumulation and airflow obstruction. Documented equipment condition with photographs showing unit positioned on pad with refrigerant lines properly routed. All components found operating within normal parameters at time of inspection.