Your home is more than just a building—it’s where life happens. Whether you’re cooking dinner, unwinding after a long day, or getting ready for a busy morning, everything should work as it should. But when the lights flicker unexpectedly, the water heater gives out, or the AC stops cooling in the middle of summer, those daily routines can quickly turn into stress. That’s where FLAME Heating, Cooling, Plumbing & Electrical comes in. We provide fast, reliable home service in Southfield, ensuring that your home stays safe, comfortable, and fully operational—no matter what comes your way. When repairs need to happen fast, call the FLAME team at (586) 217-2512 or schedule your next service visit online today.
Professional Electrical Services in Southfield

Electrical problems aren’t just annoying—they can be unsettling and even dangerous. A single flickering light might seem harmless, but when your outlets stop working or your breaker trips repeatedly, it’s a sign of a deeper issue. Ignoring these warning signs can lead to costly damage or even fire hazards. The Southfield electrical services by FLAME work to ensure your home’s electrical system is safe, efficient, and built to handle your daily needs with confidence.
- Whole-Home Rewiring – Outdated wiring can create serious hazards, from frequent power failures to fire risks.
- Electrical Panel Upgrades – If your home’s electrical panel struggles to handle your appliances or frequently trips breakers, it may be time for an upgrade.
- Lighting & Outlet Installations – Whether you’re upgrading an old space or remodeling, we install energy-efficient lighting and strategically placed outlets to improve your home’s convenience and functionality.
- Backup Generator Installation – Power outages can happen at any time, but with a whole-home generator, you’ll never have to worry.
- Ceiling Fan Installation – Reduce energy costs and improve airflow with a professionally installed ceiling fan.
- EV Charger Installation – Electric vehicles are the future, and having a home charging station makes ownership easier..
- Surge Protection – Sudden power surges can fry electronics and damage expensive appliances.
Reliable Plumbing Services in Southfield
A slow drain or a small leak might not seem like a big deal—until it turns into a flooded bathroom or a burst pipe in the middle of the night. Plumbing issues have a way of going from minor annoyances to major disruptions in no time. Whether it’s a failing water heater that leaves you with cold showers or a clogged drain backing up your sink, our team provides fast, precise Southfield plumbing services to get your home back to normal.
- Water Heater Repair & Installation – Ensure reliable hot water with expert repairs or a high-efficiency replacement.
- Sewer Line Repair & Replacement – Prevent backups and costly damage with expert sewer line services.
- Gas Line Installation & Repair in Southfield – Keep your home safe with properly installed and maintained gas lines.
- Drain Cleaning & Clog Removal – Stubborn clogs? We clear them fast before they become bigger issues.
- Sump Pump Installation & Repair – Protect your basement from water damage with reliable sump pump services.
- Kitchen & Bathroom Plumbing – From leaky faucets to complete fixture upgrades, we’ve got you covered.
- Southfield Backflow Prevention – Keep your water supply clean with professional backflow prevention solutions.
Dependable Heating Services in Southfield
If your heating system is making unusual noises, running inconsistently, or simply failing to keep your home warm, our expert team is here to diagnose and fix the issue quickly. We ensure your home stays warm, energy-efficient, and ready to handle the coldest days of the season. With industry-leading Southfield heating services from Flame, you’ll have a partner you can trust.
Furnace Repair & Replacement
Is your furnace struggling to keep your home warm? If it’s blowing cold air, making loud noises, or failing to start, it’s time for expert service. Our team quickly diagnoses the problem and provides repairs or a high-efficiency replacement to ensure consistent, reliable heating.
Boiler Installation & Repair
Boilers are a dependable heating solution, but they need proper care to function efficiently. Whether your boiler is failing to heat properly or you’re looking to upgrade, we provide expert Southfield boiler repair and installation services tailored to your home’s needs.
Ductless Mini-Split Systems
For homes without ductwork or those needing zoned heating, ductless mini-split systems offer flexible and efficient comfort. Our team installs and maintains these systems, ensuring optimal performance year-round.
Thermostat Upgrades
Upgrading your thermostat can make a significant difference in your comfort and energy savings. We install smart thermostats in Southfield that give you better control over your heating system, helping reduce waste and lower energy bills.
Preventative Maintenance
Routine maintenance is key to preventing costly breakdowns and extending the lifespan of your heating system. Our expert tune-ups keep your furnace or boiler running efficiently, reducing energy costs and ensuring reliable warmth throughout the winter.
Southfield’s Choice for Cooling Services

You wake up in the middle of the night, drenched in sweat, only to realize your AC isn’t working. Or maybe you come home from work expecting relief from the heat, but instead, your house feels just as hot as the air outside. From quick repairs to full system upgrades, we ensure your home stays cool and comfortable, even on the hottest Southfield days. Our air conditioning services in Southfield include:
- Southfield AC Installation & Upgrades – Upgrade to a high-efficiency cooling system for better performance and lower energy bills.
- AC Repair & Troubleshooting – If your AC isn’t cooling properly, we’ll diagnose and fix the issue fast.
- Ductless AC Systems – Ideal for homes without ductwork, providing energy-efficient, customizable cooling.
- Air Quality Solutions in Southfield – Improve indoor air with purification, humidity control, and ventilation services.
- Seasonal Maintenance & Tune-Ups – Keep your system running efficiently and prevent breakdowns with routine servicing.
Why Southfield Homeowners Choose FLAME
For years, Southfield residents have trusted FLAME Heating, Cooling, Plumbing & Electrical for professional service and reliable results. We’re committed to quality workmanship and customer satisfaction.
- Experienced & Certified Technicians – Our skilled professionals get the job done right the first time.
- Upfront, Honest Pricing – No surprises—just transparent pricing for every service.
- Fast, Reliable Service – We respond quickly to resolve your home service needs.
- Comprehensive Solutions – We handle heating, cooling, plumbing, and electrical—one trusted provider for all your needs.
- Customer-First Approach – Your comfort and satisfaction are our top priorities.
Book Your Service with FLAME Today
Need a trusted team to handle your home’s heating, cooling, plumbing, or electrical needs in Southfield? FLAME is here to help. Give (586) 217-2512 a call today to schedule your service and see why homeowners rely on us to keep their homes running smoothly, safely, and efficiently.
Recent Jobs and Reviews in Southfield , MI
Southfield, MI at a glance
Flame Heating, Cooling, Plumbing, Electrical has completed 20 jobs in Southfield, MI in September 2026.
The most recent job was on September 30, 2026.
Flame Heating, Cooling, Plumbing, Electrical has completed 250 jobs in Southfield, MI in the last 12 months.
Job Locations and Reviews
Responded to callback for furnace leaking water from bottom unit in basement. Upon inspection, verified active water leakage from condensate drain system. Identified improperly pitched condensate line and partially obstructed drain trap causing water backup and overflow onto floor. Corrected PVC condensate piping configuration, re-secured drain lines with proper slope for gravity drainage, cleared obstruction from trap assembly, and tested system operation under full heating cycle. Confirmed no further leakage and proper condensate drainage flow.
Completed comprehensive tune-up and inspection on 17-year-old forced air furnace located in basement. Performed thorough internal combustion chamber inspection using digital borescope camera, documenting heat exchanger condition and checking for cracks, corrosion, or deterioration. Verified proper operation of gas control valve, pilot assembly, and all safety controls on heating system.
Responded to service call for 10+ year old steam boiler with pilot light failure. Upon arrival, confirmed thermostat was functioning properly but pilot would not remain lit. Inspected thermocouple and flame sensor assembly, finding deteriorated thermocouple preventing proper flame detection and gas valve operation. Replaced faulty thermocouple with new component and tested pilot ignition sequence multiple times to ensure proper flame retention. Verified gas valve operation and safety controls were responding correctly. Observed boiler cycling through complete heating cycle with pilot remaining lit and main burner igniting as designed. Checked all electrical connections at control board and confirmed proper voltage supply. Inspected circulator pump operation and verified water flow through system. Noted water noise in piping system was consistent with normal steam boiler operation during heating cycle. System restored to full operational status with pilot light maintaining consistent fl
Completed comprehensive Gold furnace inspection on a 2-month-old forced air system located in basement. Performed full system evaluation including visual inspection of all accessible components, electrical connections, and safety controls. Verified proper operation of blower motor, heat exchanger, ignition system, and flame sensor. Inspected and documented all wiring harnesses, control board with LED diagnostics, and gas valve connections. Confirmed adequate combustion air supply and proper venting. All warning labels present and legible. System operating within manufacturer specifications with no deficiencies noted. Unit functioning properly at time of inspection.
Completed installation of 22kW standby generator with 100-amp service integration at residential property. Work included electrical connections, gas line hookup to existing natural gas meter, proper conduit routing along exterior brick wall, and system integration with main electrical panel. Generator positioned in right side yard per zoning requirements with appropriate clearances from HVAC equipment including 3-ton air conditioning unit and 90K BTU furnace. All electrical and mechanical permits obtained covering generator installation, service modifications, and HVAC reconnection. System tested and operational upon completion.
Conducted boiler replacement estimate for 70-year-old hot water boiler system located in basement. Inspected existing equipment including aged copper piping with oxidation, brass valves and fittings, expansion tank, and associated plumbing connections. Documented system configuration and photographed current installation to provide comprehensive replacement proposal for outdated heating equipment.
Completed comprehensive Gold furnace inspection on 10+ year old forced air heating system located in basement. Performed full system diagnostics including visual inspection of combustion chamber, burner assembly operation, draft inducer motor, heat exchanger, electrical connections, and gas valve components. Verified proper ignition sequence, observed clean blue flame pattern across all burner ports indicating efficient combustion, tested electrical circuits with multimeter to confirm proper voltage and amperage readings, and inspected all wire connections and safety controls. System operating within normal parameters with no immediate safety concerns identified; unit functioning properly at time of inspection.
Performed annual backflow prevention device testing on exterior-mounted assembly per regulatory requirements. Inspected backflow preventer components, including test cocks, check valves, and relief valve, confirming proper operation and compliance with cross-connection control standards. All testing procedures completed successfully with device functioning within acceptable parameters.
Completed comprehensive Gold Furnace Inspection on a 10-year-old residential furnace unit (Model: GG61T120C01, Serial: GE1W31X1ASY) manufactured in December 2012 and located in the utility area. Performed full system diagnostics including combustion analysis using digital measurement equipment, which confirmed proper CO₂ levels at 5.2% and satisfactory combustion efficiency readings. Inspected all safety controls, verified proper furnace operation, examined heat exchanger for cracks or deterioration, checked burner assembly and flame characteristics, tested blower motor and capacitor function, and verified adequate airflow throughout the system. All components found operating within manufacturer specifications with no immediate repairs required at this time.
Performed maintenance inspection on hot water boiler system located in basement, original installation dating to 1956. Evaluated boiler unit, circulator pump assembly, pressure gauge readings, and associated piping infrastructure. Noted deteriorating pipe insulation on copper lines and oxidation present on metal piping components, documenting conditions with photographic evidence for homeowner review and future reference.
Responded to utility company notification regarding three fuel connections requiring service, with one connection exhibiting an active gas leak. Conducted comprehensive pressure test on gas distribution system to identify leak location and verify system integrity. Inspected gas valve assembly with red-handle shutoff and associated black piping connections mounted on interior wall. Examined fuel line connections serving HVAC equipment, including brass fittings and copper tubing routing to furnace system in mechanical space. Addressed leaking fuel connector, performed necessary repairs or replacements to eliminate gas discharge, and verified all three flagged connections met code requirements. Completed final pressure test to confirm system holds proper pressure with no detectable leaks at any connection points.
Completed comprehensive inspection and tune-up on 70-year-old hot water boiler system located in basement. Evaluated aged electrical controls and relay components showing significant dust accumulation and surface deterioration, verified wiring connections at terminal blocks remained secure despite visible aging. Inspected manual shutoff valve assembly on supply piping, confirmed proper operation and assessed threaded connections for integrity. System operational with multiple replacement parts evident from previous service history; documented current condition of control components and piping infrastructure for maintenance records.
Completed comprehensive maintenance tune-up on a 1956 hot water boiler located in basement. Performed full system inspection, cleaned and tested all safety controls, verified proper combustion and venting, checked for leaks, and ensured unit was operating within manufacturer specifications. All components found to be functioning properly with no immediate concerns noted.
Completed fall maintenance tune-up on 10-year-old Bryant 3-ton AC unit and 17-year-old Bryant furnace, both located in basement. Performed comprehensive Gold AC inspection including refrigerant system analysis using Fieldpiece SMAN 320 dual port analyzer, verified system pressures and temperatures, and conducted dual port manometer diagnostics to ensure optimal performance. All systems operating within manufacturer specifications with no issues identified during complimentary maintenance visit.
# Electrical Service - Whole Home Inspection Performed comprehensive whole home electrical inspection at homeowner's request. Conducted thorough examination of main electrical panel, documenting interior conditions including circuit breaker arrangement, wire routing, and overall system configuration. Panel inspection revealed disorganized wiring with multiple wire colors present, various wire nut connections visible throughout, and some debris accumulation at panel base. Photographically documented all findings including main breaker, individual circuit breakers, wire management conditions, and connection points for homeowner records and future reference.
Completed comprehensive HVAC tune-up on 5-year-old Lennox Elite Series furnace located in basement. Performed full system inspection including furnace operation, humidifier functionality, thermostat calibration, and hot water tank assessment. All components tested and verified operating within normal parameters with no issues identified during inspection.
Completed comprehensive city certification inspection on main floor furnace system of unknown age. Performed full system evaluation including furnace operation, gas valve function, blower motor assembly, electrical connections and control board, thermostat calibration, humidifier operation, and hot water tank inspection. All components inspected, tested for proper operation, and documented with photos; system operating within normal parameters and tagged for city rental certification compliance.
Performed comprehensive furnace tune-up and inspection on forced air heating system located in basement. Unit is less than one year old and in excellent operating condition. Conducted thorough examination of all mechanical and electrical components, including igniter module, blower motor assembly, gas valve connections, and control wiring. Verified proper operation of all safety controls and burner assembly. System tested and confirmed to be functioning within manufacturer specifications.
Responded to service call for forced air furnace system located in basement with reported loud noises and failed blower and draft inducer motor. Upon inspection of 2019 equipment, confirmed inducer motor failure. Ordered replacement inducer motor from Behler Young Troy, available for pickup at parts house. Unit photographed for documentation showing furnace installation with connected humidifier and ductwork in mechanical room. Awaiting parts arrival to complete repair and restore system to normal operation.
Completed furnace tune-up and city certification inspection on Goodman unit located in basement. Performed comprehensive system evaluation including blower motor assembly, heat exchanger, pressure switches, and electrical connections. All components found operating within manufacturer specifications; unit approved for city certification requirements.